[Mon Jul 16 14:49:21 2012] Detection parameters:
  Position = (345.1, 475.1) = 2 23 0.43 43 11 19.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.5 +/- 14.0
  Background counts = 9.2
  Rate = 0.006 +/- 0.0006

[Mon Jul 16 14:49:21 2012] Off-axis axis estimate = 13.25'
[Mon Jul 16 15:52:06 2012] Using EEF radius (= 13.05 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 15:52:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 16 15:52:06 2012] Initial guess for spatial extent in simple fitting = 13.05"
[Mon Jul 16 15:52:06 2012] source mask rpix=3.0, npix_max = 49, mask sum = 48, frac = 0.979
[Mon Jul 16 15:52:06 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 13.05"
[Mon Jul 16 16:29:15 2012] fullrun_mos1_xmm0002970201_pi300-10000_cl_pass0_src12.ximg exists
[Mon Jul 16 16:29:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0002970201_pi300-10000_cl_pass0_src12.csv
[Mon Jul 16 16:29:15 2012] fullrun_mos1_xmm0002970201_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon Jul 16 16:29:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0002970201_pi300-10000_cl_pass0_src12.csv
[Mon Jul 16 16:29:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0002970201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0002970201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 16:29:16 2012] fullrun_mos1_xmm0002970201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon Jul 16 16:29:16 2012] fullrun_mos1_xmm0002970201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Jul 16 16:29:16 2012] Fit fullrun_mos1_xmm0002970201_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Mon Jul 16 17:05:40 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 12.496221 pixels away
[Mon Jul 16 17:05:40 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 17:05:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 17:05:40 2012] Assessing source extent using major
[Mon Jul 16 17:05:40 2012] Source does appear to be extended
[Mon Jul 16 17:05:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 18:08:45 2012] Using EEF radius (= 13.05 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 18:08:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 16 18:08:45 2012] Initial guess for spatial extent in simple fitting = 13.05"
[Mon Jul 16 18:08:45 2012] source mask rpix=3.0, npix_max = 49, mask sum = 48, frac = 0.979
[Mon Jul 16 18:08:45 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 13.05"
[Mon Jul 16 18:42:52 2012] fullrun_mos1_xmm0002970201_pi300-10000_cl_pass1_src12.ximg exists
[Mon Jul 16 18:42:52 2012] fullrun_mos1_xmm0002970201_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon Jul 16 18:42:52 2012] Fit fullrun_mos1_xmm0002970201_pi300-10000_cl_pass1_src12 appears to have run properly
[Mon Jul 16 18:42:52 2012] fullrun_mos1_xmm0002970201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon Jul 16 18:42:52 2012] fullrun_mos1_xmm0002970201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Jul 16 18:42:52 2012] Fit fullrun_mos1_xmm0002970201_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Mon Jul 16 19:16:26 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 17.676676 pixels away
[Mon Jul 16 19:16:26 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 19:16:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 19:16:26 2012] Assessing source extent using major
[Mon Jul 16 19:16:26 2012] Source does appear to be extended
[Mon Jul 16 19:16:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 20:24:51 2012] XMMSAS src. selection expression = ellipse(29971.802094, 41283.395111, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 16 20:24:51 2012] Writing source region out to fullrun_mos1_xmm0002970201_pi300-10000_pass1_cl_src14_src.reg
[Mon Jul 16 20:24:51 2012] Extracting stamp from image fullrun_mos1_xmm0002970201_pi300-10000_cl_sm2.00.img.gz, (308, 438) - (383, 513)
[Mon Jul 16 20:24:51 2012] XMMSAS bgd. selection expression = annulus(29971.802094, 41283.395111, 1087.500000, 2175.000000, X, Y)
[Mon Jul 16 20:24:51 2012] Writing fullrun_mos1_xmm0002970201_pi300-10000_pass1_cl_src14.gif
[Mon Jul 16 20:29:01 2012] Mean detx,y = (14426.84, -2563.81) 
[Mon Jul 16 20:29:02 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 20:29:11 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 20:29:11 2012] Setting source spectrum file to fullrun_mos1_xmm0002970201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Jul 16 20:29:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0002970201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon Jul 16 20:46:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 16 20:46:32 2012] rmf not generated due to insufficient counts
[Mon Jul 16 21:15:00 2012] Updating aperture counts using extracted products
[Mon Jul 16 21:15:00 2012] Error reading totcts from fullrun_mos1_xmm0002970201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Jul 16 21:15:00 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 21:15:00 2012] Using photon index=1.80, rate=0.00562, arf fullrun_mos1_xmm0002970201_pi300-10000_pass1_cl_src14.arf
[Mon Jul 16 21:15:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 21:15:00 2012] Updating source flux to 1.4e-13
[Mon Jul 16 21:15:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting