[Fri Sep 30 22:27:17 2011] Detection parameters:
  Position = (330.6, 332.8) = 8 3 58.61 5 7 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.5 +/- 10.3
  Background counts = 16.8
  Rate = 0.03 +/- 0.006

[Fri Sep 30 22:27:17 2011] Off-axis axis estimate = 3.41'
[Fri Sep 30 22:30:51 2011] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 22:30:51 2011] Initial guess for spatial extent in simple fitting = 8.14"
[Fri Sep 30 22:30:51 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.112
[Fri Sep 30 22:30:51 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 8.14"
[Fri Sep 30 23:13:53 2011] fullrun_pn_xmm0002940701_pi300-10000_cl_pass0_src12.ximg exists
[Fri Sep 30 23:13:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0002940701_pi300-10000_cl_pass0_src12.csv
[Fri Sep 30 23:13:53 2011] fullrun_pn_xmm0002940701_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Sep 30 23:13:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0002940701_pi300-10000_cl_pass0_src12.csv
[Fri Sep 30 23:13:53 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0002940701_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0002940701_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 23:13:53 2011] fullrun_pn_xmm0002940701_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Sep 30 23:13:53 2011] fullrun_pn_xmm0002940701_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Sep 30 23:13:53 2011] Fit fullrun_pn_xmm0002940701_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Sep 30 23:18:56 2011] Spatial fit model total counts = 72.791100, observed total counts = 78.000000
[Fri Sep 30 23:18:56 2011] Offset between fit and detection position for source 12 = 4.397860 pixels
[Fri Sep 30 23:18:56 2011] 56.411036 total counts/ 0.274636 bgd. counts: snr = 107.118831
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 4.397860 pixels
  Position = (334.1, 335.5) = 8 3 57.60 5 7 52.7
  Extent = 15.5 (14.1-16.3)", rotation angle = 0
  Source counts = 56.1 +/- 7.5
  Background counts = 0.3
  Rate = 0.3 +/- 0.05
[Fri Sep 30 23:18:56 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 23:18:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 23:18:56 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 23:18:56 2011] Source does appear to be extended
[Fri Sep 30 23:18:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 23:19:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 23:19:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 23:19:03 2011] Initial guess for spatial extent in simple fitting = 15.55"
[Fri Sep 30 23:19:03 2011] source mask rpix=3.6, npix_max = 66, mask sum = 45, frac = 0.678
[Fri Sep 30 23:19:03 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 15.55"
[Fri Sep 30 23:58:36 2011] fullrun_pn_xmm0002940701_pi300-10000_cl_pass1_src9.ximg exists
[Fri Sep 30 23:58:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0002940701_pi300-10000_cl_pass1_src9.csv
[Fri Sep 30 23:58:36 2011] fullrun_pn_xmm0002940701_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Sep 30 23:58:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0002940701_pi300-10000_cl_pass1_src9.csv
[Fri Sep 30 23:58:36 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0002940701_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0002940701_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 23:58:36 2011] fullrun_pn_xmm0002940701_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Sep 30 23:58:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0002940701_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Sep 30 23:58:36 2011] fullrun_pn_xmm0002940701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Sep 30 23:58:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0002940701_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Sep 30 23:58:36 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0002940701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0002940701_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 00:05:03 2011] Warning, spatial fit 9 centroid is now closest to src. 8
[Sat Oct  1 00:05:03 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 00:05:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 00:05:03 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 00:05:03 2011] Source does appear to be extended
[Sat Oct  1 00:05:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 00:05:08 2011] XMMSAS src. selection expression = ellipse(29017.108000, 29141.975800, 932.952027, 932.952027, 0.000000, X, Y)
[Sat Oct  1 00:05:08 2011] Writing source region out to fullrun_pn_xmm0002940701_pi300-10000_pass1_cl_src12_src.reg
[Sat Oct  1 00:05:08 2011] Extracting stamp from image fullrun_pn_xmm0002940701_pi300-10000_cl_sm2.00.img.gz, (280, 282) - (388, 389)
[Sat Oct  1 00:05:08 2011] XMMSAS bgd. selection expression = annulus(29017.108000, 29141.975800, 1554.920045, 3109.840089, X, Y) && !ellipse(26550.834800, 27876.572200, 344.966410, 344.966410, 0.000000, X, Y) && !ellipse(29223.221000, 28025.383800, 711.013620, 711.013620, 0.000000, X, Y) && !ellipse(27891.323792, 28771.986389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30069.839050, 29463.406464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31949.514832, 29278.146484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26839.366000, 27836.486000, 1211.048035, 1211.048035, 0.000000, X, Y) && !ellipse(27435.983612, 28191.477509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27383.496338, 27111.488586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30631.852997, 29631.480438, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Oct  1 00:05:08 2011] Writing fullrun_pn_xmm0002940701_pi300-10000_pass1_cl_src12.gif
[Sat Oct  1 00:08:48 2011] Mean detx,y = (2678.73, -483.26) 
[Sat Oct  1 00:08:50 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Oct  1 00:09:23 2011] Binned source spectrum to 10 counts/bin
[Sat Oct  1 00:09:23 2011] Setting source spectrum file to fullrun_pn_xmm0002940701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Oct  1 00:09:23 2011] Setting bgd. spectrum file to fullrun_pn_xmm0002940701_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Oct  1 00:20:08 2011] Not generating rmf since there are only 56 counts
[Sat Oct  1 00:20:08 2011] rmf not generated due to insufficient counts
[Sat Oct  1 00:55:13 2011] Updating aperture counts using extracted products
[Sat Oct  1 00:55:13 2011] Error reading totcts from fullrun_pn_xmm0002940701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Oct  1 00:55:13 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 00:55:13 2011] Using photon index=1.80, rate=0.337, arf fullrun_pn_xmm0002940701_pi300-10000_pass1_cl_src12.arf
[Sat Oct  1 00:55:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct  1 00:55:13 2011] Updating source flux to 8.8e-13
[Sat Oct  1 00:55:37 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct  1 00:55:38 2011] xmm0002940701/analysis//spectral/fullrun_pn_xmm0002940701_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete