[Sun Jun 23 07:24:40 2013] Detection parameters:
  Position = (292.2, 405.0) = 3 41 18.02 -1 11 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.0 +/- 11.3
  Background counts = 16.3
  Rate = 0.02 +/- 0.003

[Sun Jun 23 07:24:40 2013] Off-axis axis estimate = 7.74'
[Sun Jun 23 07:31:32 2013] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 07:31:32 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 23 07:31:32 2013] Initial guess for spatial extent in simple fitting = 10.30"
[Sun Jun 23 07:31:32 2013] source mask rpix=2.4, npix_max = 32, mask sum = 32, frac = 0.973
[Sun Jun 23 07:31:32 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 10.30"
[Sun Jun 23 07:36:33 2013] fullrun_mos2_xmm0002940401_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jun 23 07:36:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002940401_pi300-10000_cl_pass0_src2.csv
[Sun Jun 23 07:36:33 2013] fullrun_mos2_xmm0002940401_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jun 23 07:36:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002940401_pi300-10000_cl_pass0_src2.csv
[Sun Jun 23 07:36:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0002940401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0002940401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 07:36:33 2013] fullrun_mos2_xmm0002940401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jun 23 07:36:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002940401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Jun 23 07:36:33 2013] fullrun_mos2_xmm0002940401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jun 23 07:36:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002940401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Jun 23 07:36:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0002940401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0002940401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 07:36:36 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.837800 pixels away
[Sun Jun 23 07:36:36 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 07:36:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 07:36:36 2013] Assessing source extent using major
[Sun Jun 23 07:36:36 2013] Source does appear to be extended
[Sun Jun 23 07:36:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 07:43:03 2013] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 07:43:03 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 23 07:43:03 2013] Initial guess for spatial extent in simple fitting = 10.30"
[Sun Jun 23 07:43:03 2013] source mask rpix=2.4, npix_max = 32, mask sum = 32, frac = 0.973
[Sun Jun 23 07:43:03 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.30"
[Sun Jun 23 07:48:13 2013] fullrun_mos2_xmm0002940401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 23 07:48:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002940401_pi300-10000_cl_pass1_src1.csv
[Sun Jun 23 07:48:13 2013] fullrun_mos2_xmm0002940401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 23 07:48:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002940401_pi300-10000_cl_pass1_src1.csv
[Sun Jun 23 07:48:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0002940401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0002940401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 07:48:13 2013] fullrun_mos2_xmm0002940401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 23 07:48:13 2013] fullrun_mos2_xmm0002940401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 23 07:48:13 2013] Fit fullrun_mos2_xmm0002940401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun 23 07:48:17 2013] Spatial fit model total counts = 159.800000, observed total counts = 145.000000
[Sun Jun 23 07:48:17 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 07:48:17 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 07:48:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 07:48:17 2013] Assessing source extent using major
[Sun Jun 23 07:48:17 2013] Source does appear to be extended
[Sun Jun 23 07:48:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 07:50:49 2013] XMMSAS src. selection expression = ellipse(25374.950745, 35186.154846, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 07:50:49 2013] Writing source region out to fullrun_mos2_xmm0002940401_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 23 07:50:49 2013] Extracting stamp from image fullrun_mos2_xmm0002940401_pi300-10000_cl_sm2.00.img.gz, (255, 367) - (330, 442)
[Sun Jun 23 07:50:49 2013] XMMSAS bgd. selection expression = annulus(25374.950745, 35186.154846, 1087.500000, 2175.000000, X, Y)
[Sun Jun 23 07:50:49 2013] Writing fullrun_mos2_xmm0002940401_pi300-10000_pass1_cl_src1.gif
[Sun Jun 23 07:51:07 2013] Mean detx,y = (4602.80, 7011.56) 
[Sun Jun 23 07:51:08 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 07:51:31 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 07:51:32 2013] Setting source spectrum file to fullrun_mos2_xmm0002940401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 23 07:51:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0002940401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 23 07:52:24 2013] Not generating rmf since there are only 70 counts
[Sun Jun 23 07:52:24 2013] rmf not generated due to insufficient counts
[Sun Jun 23 07:53:09 2013] Updating aperture counts using extracted products
[Sun Jun 23 07:53:09 2013] Total counts from fullrun_mos2_xmm0002940401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 82.00
[Sun Jun 23 07:53:09 2013] Total counts from fullrun_mos2_xmm0002940401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 516.00
[Sun Jun 23 07:53:09 2013] Got source and background scale factors 1105070.000000, 10392090.000000
[Sun Jun 23 07:53:10 2013] User source parameters:
  Position = (292.2, 405.0) = 3 41 18.02 -1 11 11.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 27.1 +/- 10.1
  Background aperture counts = 54.9
  Rate = 0.006 +/- 0.002

[Sun Jun 23 07:53:10 2013] Updating counts from extracted products
[Sun Jun 23 07:53:10 2013] Set source signif. to 27.13/7.41 = 3.66
[Sun Jun 23 07:53:10 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 07:53:10 2013] Using photon index=1.80, rate=0.00646, arf fullrun_mos2_xmm0002940401_pi300-10000_pass1_cl_src1.arf
[Sun Jun 23 07:53:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 07:53:10 2013] Updating source flux to 1.3e-13
[Sun Jun 23 07:53:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 07:53:14 2013] xmm0002940401/analysis//spectral/fullrun_mos2_xmm0002940401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete