[Wed Sep 28 16:01:07 2011] Detection parameters:
  Position = (440.8, 297.8) = 13 6 19.64 -23 38 55.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.1 +/- 10.6
  Background counts = 1.6
  Rate = 0.01 +/- 0.001

[Wed Sep 28 16:01:08 2011] Off-axis axis estimate = 10.32'
[Wed Sep 28 16:29:05 2011] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 16:29:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 16:29:05 2011] Initial guess for spatial extent in simple fitting = 11.59"
[Wed Sep 28 16:29:05 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.899
[Wed Sep 28 16:29:05 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 11.59"
[Wed Sep 28 16:44:20 2011] fullrun_mos2_xmm0002940101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Sep 28 16:44:20 2011] fullrun_mos2_xmm0002940101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Sep 28 16:44:20 2011] Fit fullrun_mos2_xmm0002940101_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed Sep 28 16:44:20 2011] fullrun_mos2_xmm0002940101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Sep 28 16:44:20 2011] fullrun_mos2_xmm0002940101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Sep 28 16:44:20 2011] Fit fullrun_mos2_xmm0002940101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Sep 28 16:44:27 2011] Spatial fit model total counts = 90.974200, observed total counts = 91.000000
[Wed Sep 28 16:44:27 2011] Offset between fit and detection position for source 2 = 0.492175 pixels
[Wed Sep 28 16:44:27 2011] 90.307100 total counts/ 10.251700 bgd. counts: snr = 25.003033
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.492175 pixels
  Position = (440.4, 297.6) = 13 6 19.79 -23 38 54.4
  Extent = 9.2 (7.0-11.5)", rotation angle = 0
  Source counts = 80.1 +/- 9.5
  Background counts = 10.3
  Rate = 0.01 +/- 0.001
[Wed Sep 28 16:44:27 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 16:44:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 16:44:27 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 16:44:27 2011] Source does appear to be extended
[Wed Sep 28 16:44:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:11:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:11:16 2011] Initial guess for spatial extent in simple fitting = 9.21"
[Wed Sep 28 17:11:16 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.912
[Wed Sep 28 17:11:16 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 9.21"
[Wed Sep 28 17:26:11 2011] fullrun_mos2_xmm0002940101_pi300-10000_cl_pass1_src3.ximg exists
[Wed Sep 28 17:26:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002940101_pi300-10000_cl_pass1_src3.csv
[Wed Sep 28 17:26:11 2011] fullrun_mos2_xmm0002940101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Sep 28 17:26:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002940101_pi300-10000_cl_pass1_src3.csv
[Wed Sep 28 17:26:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0002940101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0002940101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:26:11 2011] fullrun_mos2_xmm0002940101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Sep 28 17:26:11 2011] fullrun_mos2_xmm0002940101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Sep 28 17:26:11 2011] Fit fullrun_mos2_xmm0002940101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Sep 28 17:26:16 2011] Spatial fit model total counts = 90.929700, observed total counts = 91.000000
[Wed Sep 28 17:26:16 2011] Offset between fit and detection position for source 2 = 0.010434 pixels
[Wed Sep 28 17:26:16 2011] 90.295500 total counts/ 10.336000 bgd. counts: snr = 24.871033
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.010434 pixels
  Position = (440.3, 297.6) = 13 6 19.79 -23 38 54.4
  Extent = 9.2 (7.0-11.5)", rotation angle = 0
  Source counts = 80.0 +/- 9.5
  Background counts = 10.3
  Rate = 0.01 +/- 0.001
[Wed Sep 28 17:26:16 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:26:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:26:16 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 17:26:16 2011] Source does appear to be extended
[Wed Sep 28 17:26:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:38:51 2011] XMMSAS src. selection expression = ellipse(38261.578400, 25845.145600, 553.341616, 553.341616, 0.000000, X, Y)
[Wed Sep 28 17:38:51 2011] Writing source region out to fullrun_mos2_xmm0002940101_pi300-10000_pass1_cl_src2_src.reg
[Wed Sep 28 17:38:51 2011] Extracting stamp from image fullrun_mos2_xmm0002940101_pi300-10000_cl_sm2.00.img.gz, (409, 266) - (472, 329)
[Wed Sep 28 17:38:51 2011] XMMSAS bgd. selection expression = annulus(38261.578400, 25845.145600, 922.236027, 1844.472053, X, Y)
[Wed Sep 28 17:38:51 2011] Writing fullrun_mos2_xmm0002940101_pi300-10000_pass1_cl_src2.gif
[Wed Sep 28 17:39:06 2011] Mean detx,y = (12569.96, 3156.12) 
[Wed Sep 28 17:39:06 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 17:39:14 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 17:39:14 2011] Setting source spectrum file to fullrun_mos2_xmm0002940101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Sep 28 17:39:14 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0002940101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Sep 28 17:40:53 2011] Not generating rmf since there are only 79 counts
[Wed Sep 28 17:40:53 2011] rmf not generated due to insufficient counts
[Wed Sep 28 17:41:19 2011] Updating aperture counts using extracted products
[Wed Sep 28 17:41:19 2011] Error reading totcts from fullrun_mos2_xmm0002940101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Sep 28 17:41:19 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 17:41:19 2011] Using photon index=1.80, rate=0.011, arf fullrun_mos2_xmm0002940101_pi300-10000_pass1_cl_src2.arf
[Wed Sep 28 17:41:19 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 17:41:19 2011] Updating source flux to 2.8e-13
[Wed Sep 28 17:41:21 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 28 17:41:22 2011] xmm0002940101/analysis//spectral/fullrun_mos2_xmm0002940101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete