[Tue Aug 28 00:25:22 2012] Detection parameters:
  Position = (345.7, 300.6) = 11 7 19.53 -77 36 37.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.8 +/- 12.7
  Background counts = 53.5
  Rate = 0.003 +/- 0.0005

[Tue Aug 28 00:25:23 2012] Off-axis axis estimate = 3.43'
[Tue Aug 28 01:44:26 2012] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 01:44:26 2012] Initial guess for spatial extent in simple fitting = 8.15"
[Tue Aug 28 01:44:26 2012] source mask rpix=1.9, npix_max = 22, mask sum = 21, frac = 0.933
[Tue Aug 28 01:44:26 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.15"
[Tue Aug 28 02:13:26 2012] fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_src23.ximg exists
[Tue Aug 28 02:13:26 2012] fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_src23_1.ximg exists
[Tue Aug 28 02:13:26 2012] Fit fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_src23 appears to have run properly
[Tue Aug 28 02:13:26 2012] fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Tue Aug 28 02:13:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_tfrozen_src23.csv
[Tue Aug 28 02:13:26 2012] fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Tue Aug 28 02:13:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_tfrozen_src23.csv
[Tue Aug 28 02:13:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 02:13:42 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 13.339084 pixels away
[Tue Aug 28 02:13:42 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 02:13:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 02:13:42 2012] Assessing source extent using major
[Tue Aug 28 02:13:42 2012] Source does appear to be extended
[Tue Aug 28 02:13:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 03:30:47 2012] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 03:30:47 2012] Initial guess for spatial extent in simple fitting = 8.15"
[Tue Aug 28 03:30:47 2012] source mask rpix=1.9, npix_max = 22, mask sum = 21, frac = 0.933
[Tue Aug 28 03:30:47 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 8.15"
[Tue Aug 28 03:59:54 2012] fullrun_mos2_xmm0002740501_pi300-10000_cl_pass1_src23.ximg exists
[Tue Aug 28 03:59:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002740501_pi300-10000_cl_pass1_src23.csv
[Tue Aug 28 03:59:54 2012] fullrun_mos2_xmm0002740501_pi300-10000_cl_pass1_src23_1.ximg exists
[Tue Aug 28 03:59:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002740501_pi300-10000_cl_pass1_src23.csv
[Tue Aug 28 03:59:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0002740501_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0002740501_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 03:59:55 2012] fullrun_mos2_xmm0002740501_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Tue Aug 28 03:59:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002740501_pi300-10000_cl_pass1_tfrozen_src23.csv
[Tue Aug 28 03:59:55 2012] fullrun_mos2_xmm0002740501_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Tue Aug 28 03:59:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002740501_pi300-10000_cl_pass1_tfrozen_src23.csv
[Tue Aug 28 03:59:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0002740501_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0002740501_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 04:00:10 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 31.714872 pixels away
[Tue Aug 28 04:00:10 2012] Spatial fit model total counts = 232.373000, observed total counts = 209.000000
[Tue Aug 28 04:00:10 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 28 04:00:10 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 04:00:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 04:00:10 2012] Assessing source extent using major
[Tue Aug 28 04:00:10 2012] Source does appear to be extended
[Tue Aug 28 04:00:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 04:37:45 2012] XMMSAS src. selection expression = ellipse(30031.426086, 26102.827026, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 28 04:37:45 2012] Writing source region out to fullrun_mos2_xmm0002740501_pi300-10000_pass1_cl_src15_src.reg
[Tue Aug 28 04:37:45 2012] Extracting stamp from image fullrun_mos2_xmm0002740501_pi300-10000_cl_sm2.00.img.gz, (308, 263) - (383, 338)
[Tue Aug 28 04:37:45 2012] XMMSAS bgd. selection expression = annulus(30031.426086, 26102.827026, 1087.500000, 2175.000000, X, Y) && !ellipse(29953.493011, 24387.213470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27413.820590, 23668.707697, 803.707404, 438.100704, 14.953657, X, Y) && !ellipse(29056.794800, 28345.174000, 387.622415, 387.622415, 0.000000, X, Y) && !ellipse(27921.091600, 25780.697000, 246.205607, 246.205607, 0.000000, X, Y)
[Tue Aug 28 04:37:45 2012] Writing fullrun_mos2_xmm0002740501_pi300-10000_pass1_cl_src15.gif
[Tue Aug 28 04:47:31 2012] Mean detx,y = (-862.08, 1991.77) 
[Tue Aug 28 04:47:32 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 04:47:42 2012] grppha failed
[Tue Aug 28 04:47:42 2012] Setting source spectrum file to fullrun_mos2_xmm0002740501_pi300-10000_pass1_cl_src15_src.pi.gz
[Tue Aug 28 04:47:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0002740501_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Aug 28 04:48:27 2012] Not generating rmf since there are only 72 counts
[Tue Aug 28 04:48:27 2012] rmf not generated due to insufficient counts
[Tue Aug 28 04:49:21 2012] Updating aperture counts using extracted products
[Tue Aug 28 04:49:21 2012] Error reading totcts from fullrun_mos2_xmm0002740501_pi300-10000_pass1_cl_src15_src.pi.gz
[Tue Aug 28 04:49:21 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 04:49:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 28 04:49:25 2012] xmm0002740501/analysis//spectral/fullrun_mos2_xmm0002740501_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete