[Tue Aug 28 00:25:22 2012] Detection parameters:
  Position = (198.4, 355.9) = 11 10 37.92 -77 32 38.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 309.2 +/- 22.8
  Background counts = 35.9
  Rate = 0.009 +/- 0.0007

[Tue Aug 28 00:25:23 2012] Off-axis axis estimate = 8.36'
[Tue Aug 28 01:44:26 2012] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 01:44:26 2012] Initial guess for spatial extent in simple fitting = 10.61"
[Tue Aug 28 01:44:26 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.868
[Tue Aug 28 01:44:26 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 10.61"
[Tue Aug 28 02:13:26 2012] fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_src16.ximg exists
[Tue Aug 28 02:13:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_src16.csv
[Tue Aug 28 02:13:26 2012] fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Aug 28 02:13:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_src16.csv
[Tue Aug 28 02:13:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 02:13:26 2012] fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Aug 28 02:13:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Aug 28 02:13:26 2012] fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Aug 28 02:13:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Aug 28 02:13:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0002740501_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 02:13:42 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 14.145724 pixels away
[Tue Aug 28 02:13:42 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 02:13:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 02:13:42 2012] Assessing source extent using major
[Tue Aug 28 02:13:42 2012] Source does appear to be extended
[Tue Aug 28 02:13:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 03:30:47 2012] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 03:30:47 2012] Initial guess for spatial extent in simple fitting = 10.61"
[Tue Aug 28 03:30:47 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.868
[Tue Aug 28 03:30:47 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 10.61"
[Tue Aug 28 03:59:54 2012] fullrun_mos2_xmm0002740501_pi300-10000_cl_pass1_src16.ximg exists
[Tue Aug 28 03:59:54 2012] fullrun_mos2_xmm0002740501_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Aug 28 03:59:54 2012] Fit fullrun_mos2_xmm0002740501_pi300-10000_cl_pass1_src16 appears to have run properly
[Tue Aug 28 03:59:54 2012] fullrun_mos2_xmm0002740501_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Aug 28 03:59:54 2012] fullrun_mos2_xmm0002740501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Aug 28 03:59:54 2012] Fit fullrun_mos2_xmm0002740501_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Tue Aug 28 04:00:10 2012] Spatial fit model total counts = 338.040000, observed total counts = 323.000000
[Tue Aug 28 04:00:10 2012] Offset between fit and detection position for source 11 = 0.021050 pixels
[Tue Aug 28 04:00:10 2012] 336.363000 total counts/ 177.109000 bgd. counts: snr = 11.966580
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.021050 pixels
  Position = (198.5, 355.9) = 11 10 37.90 -77 32 38.6
  Extent = 5.8 (4.8-7.0)" x 4.4 (3.5-5.4)", rotation angle = 118 (90-147) degrees
  Source counts = 159.3 +/- 18.3
  Background counts = 177.1
  Rate = 0.006 +/- 0.0007
[Tue Aug 28 04:00:10 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 04:00:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 04:00:10 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 04:00:10 2012] Source does appear to be extended
[Tue Aug 28 04:00:10 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.90
[Tue Aug 28 04:37:45 2012] XMMSAS src. selection expression = ellipse(17217.999000, 30915.160200, 345.128410, 261.606608, 117.986369, X, Y)
[Tue Aug 28 04:37:45 2012] Writing source region out to fullrun_mos2_xmm0002740501_pi300-10000_pass1_cl_src11_src.reg
[Tue Aug 28 04:37:45 2012] Extracting stamp from image fullrun_mos2_xmm0002740501_pi300-10000_cl_sm2.00.img.gz, (179, 336) - (218, 376)
[Tue Aug 28 04:37:45 2012] XMMSAS bgd. selection expression = annulus(17217.999000, 30915.160200, 575.214017, 1150.428033, X, Y)
[Tue Aug 28 04:37:45 2012] Writing fullrun_mos2_xmm0002740501_pi300-10000_pass1_cl_src11.gif
[Tue Aug 28 04:45:10 2012] Mean detx,y = (10039.00, -6355.03) 
[Tue Aug 28 04:45:11 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 04:45:24 2012] grppha failed
[Tue Aug 28 04:45:24 2012] Setting source spectrum file to fullrun_mos2_xmm0002740501_pi300-10000_pass1_cl_src11_src.pi.gz
[Tue Aug 28 04:45:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0002740501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Aug 28 04:49:21 2012] Updating aperture counts using extracted products
[Tue Aug 28 04:49:21 2012] Error reading totcts from fullrun_mos2_xmm0002740501_pi300-10000_pass1_cl_src11_src.pi.gz
[Tue Aug 28 04:49:21 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 04:49:24 2012] Source 11 has no response, skipping
[Tue Aug 28 04:49:25 2012] xmm0002740501/analysis//spectral/fullrun_mos2_xmm0002740501_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete