[Tue Aug 28 00:25:01 2012] Detection parameters:
  Position = (350.8, 162.7) = 11 7 11.77 -77 46 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 360.4 +/- 24.5
  Background counts = 43.2
  Rate = 0.01 +/- 0.0007

[Tue Aug 28 00:25:01 2012] Off-axis axis estimate = 10.55'
[Tue Aug 28 01:10:50 2012] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 01:10:50 2012] Initial guess for spatial extent in simple fitting = 11.70"
[Tue Aug 28 01:10:50 2012] source mask rpix=2.7, npix_max = 40, mask sum = 31, frac = 0.762
[Tue Aug 28 01:10:50 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 11.70"
[Tue Aug 28 01:44:25 2012] fullrun_mos1_xmm0002740501_pi300-10000_cl_pass0_src13.ximg exists
[Tue Aug 28 01:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0002740501_pi300-10000_cl_pass0_src13.csv
[Tue Aug 28 01:44:25 2012] fullrun_mos1_xmm0002740501_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Aug 28 01:44:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0002740501_pi300-10000_cl_pass0_src13.csv
[Tue Aug 28 01:44:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0002740501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0002740501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 01:44:26 2012] fullrun_mos1_xmm0002740501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Aug 28 01:44:26 2012] fullrun_mos1_xmm0002740501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Aug 28 01:44:26 2012] Fit fullrun_mos1_xmm0002740501_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Aug 28 02:13:37 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 14.889541 pixels away
[Tue Aug 28 02:13:37 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 02:13:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 02:13:37 2012] Assessing source extent using major
[Tue Aug 28 02:13:37 2012] Source does appear to be extended
[Tue Aug 28 02:13:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 02:58:34 2012] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 02:58:34 2012] Initial guess for spatial extent in simple fitting = 11.70"
[Tue Aug 28 02:58:34 2012] source mask rpix=2.7, npix_max = 40, mask sum = 31, frac = 0.762
[Tue Aug 28 02:58:34 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 11.70"
[Tue Aug 28 03:30:45 2012] fullrun_mos1_xmm0002740501_pi300-10000_cl_pass1_src13.ximg exists
[Tue Aug 28 03:30:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0002740501_pi300-10000_cl_pass1_src13.csv
[Tue Aug 28 03:30:45 2012] fullrun_mos1_xmm0002740501_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Aug 28 03:30:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0002740501_pi300-10000_cl_pass1_src13.csv
[Tue Aug 28 03:30:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0002740501_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0002740501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 03:30:46 2012] fullrun_mos1_xmm0002740501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Aug 28 03:30:46 2012] fullrun_mos1_xmm0002740501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Aug 28 03:30:46 2012] Fit fullrun_mos1_xmm0002740501_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Aug 28 04:00:06 2012] Spatial fit model total counts = 413.829000, observed total counts = 374.000000
[Tue Aug 28 04:00:06 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 28 04:00:06 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 04:00:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 04:00:06 2012] Assessing source extent using major
[Tue Aug 28 04:00:06 2012] Source does appear to be extended
[Tue Aug 28 04:00:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 04:25:50 2012] XMMSAS src. selection expression = ellipse(30469.755493, 14107.010391, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 28 04:25:50 2012] Writing source region out to fullrun_mos1_xmm0002740501_pi300-10000_pass1_cl_src25_src.reg
[Tue Aug 28 04:25:50 2012] Extracting stamp from image fullrun_mos1_xmm0002740501_pi300-10000_cl_sm2.00.img.gz, (313, 125) - (388, 200)
[Tue Aug 28 04:25:50 2012] XMMSAS bgd. selection expression = annulus(30469.755493, 14107.010391, 1087.500000, 2175.000000, X, Y)
[Tue Aug 28 04:25:50 2012] Writing fullrun_mos1_xmm0002740501_pi300-10000_pass1_cl_src25.gif
[Tue Aug 28 04:33:19 2012] Mean detx,y = (-3847.62, 11029.40) 
[Tue Aug 28 04:33:20 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 04:33:31 2012] grppha failed
[Tue Aug 28 04:33:31 2012] Setting source spectrum file to fullrun_mos1_xmm0002740501_pi300-10000_pass1_cl_src25_src.pi.gz
[Tue Aug 28 04:33:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0002740501_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Aug 28 04:37:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 28 04:37:43 2012] rmf not generated due to insufficient counts
[Tue Aug 28 04:49:21 2012] Updating aperture counts using extracted products
[Tue Aug 28 04:49:21 2012] Error reading totcts from fullrun_mos1_xmm0002740501_pi300-10000_pass1_cl_src25_src.pi.gz
[Tue Aug 28 04:49:21 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 04:49:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 28 04:49:24 2012] xmm0002740501/analysis//spectral/fullrun_mos1_xmm0002740501_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete