[Tue May 28 01:24:35 2013] Detection parameters:
  Position = (225.1, 242.4) = 3 54 12.92 23 20 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 328.7 +/- 23.7
  Background counts = 71.5
  Rate = 0.01 +/- 0.0009

[Tue May 28 01:24:35 2013] Off-axis axis estimate = 6.69'
[Tue May 28 01:57:02 2013] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Tue May 28 01:57:02 2013] Initial guess for spatial extent in simple fitting = 9.78"
[Tue May 28 01:57:02 2013] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.994
[Tue May 28 01:57:02 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 9.78"
[Tue May 28 02:14:30 2013] fullrun_mos1_xmm0002740101_pi300-10000_cl_pass0_src2.ximg exists
[Tue May 28 02:14:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0002740101_pi300-10000_cl_pass0_src2.csv
[Tue May 28 02:14:30 2013] fullrun_mos1_xmm0002740101_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue May 28 02:14:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0002740101_pi300-10000_cl_pass0_src2.csv
[Tue May 28 02:14:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0002740101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0002740101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 02:14:30 2013] fullrun_mos1_xmm0002740101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue May 28 02:14:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0002740101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue May 28 02:14:30 2013] fullrun_mos1_xmm0002740101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue May 28 02:14:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0002740101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue May 28 02:14:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0002740101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0002740101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 02:28:22 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.218830 pixels away
[Tue May 28 02:28:22 2013] Vigneting correction estimate = 1.000000
[Tue May 28 02:28:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 02:28:22 2013] Assessing source extent using major
[Tue May 28 02:28:22 2013] Source does appear to be extended
[Tue May 28 02:28:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 02:59:51 2013] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Tue May 28 02:59:51 2013] Initial guess for spatial extent in simple fitting = 9.78"
[Tue May 28 02:59:51 2013] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.994
[Tue May 28 02:59:51 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.78"
[Tue May 28 03:16:12 2013] fullrun_mos1_xmm0002740101_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 28 03:16:12 2013] fullrun_mos1_xmm0002740101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 28 03:16:12 2013] Fit fullrun_mos1_xmm0002740101_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue May 28 03:16:12 2013] fullrun_mos1_xmm0002740101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 28 03:16:12 2013] fullrun_mos1_xmm0002740101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 28 03:16:12 2013] Fit fullrun_mos1_xmm0002740101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 28 03:33:01 2013] Spatial fit model total counts = 460.099000, observed total counts = 440.000000
[Tue May 28 03:33:01 2013] Offset between fit and detection position for source 3 = 0.470713 pixels
[Tue May 28 03:33:01 2013] 455.005000 total counts/ 377.117000 bgd. counts: snr = 4.010814
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.470713 pixels
  Position = (225.2, 242.8) = 3 54 12.88 23 20 48.6
  Extent = 4.0 (3.3-5.0)", rotation angle = 0
  Source counts = 77.9 +/- 21.3
  Background counts = 377.1
  Rate = 0.003 +/- 0.0008
[Tue May 28 03:33:01 2013] Vigneting correction estimate = 1.000000
[Tue May 28 03:33:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 03:33:01 2013] Assessing source extent using major axis lower bound
[Tue May 28 03:33:01 2013] Source does appear to be extended
[Tue May 28 03:33:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 03:53:39 2013] XMMSAS src. selection expression = ellipse(19543.385240, 21077.606200, 242.157007, 242.157007, 0.000000, X, Y)
[Tue May 28 03:53:39 2013] Writing source region out to fullrun_mos1_xmm0002740101_pi300-10000_pass1_cl_src3_src.reg
[Tue May 28 03:53:39 2013] Extracting stamp from image fullrun_mos1_xmm0002740101_pi300-10000_cl_sm2.00.img.gz, (211, 229) - (239, 257)
[Tue May 28 03:53:39 2013] XMMSAS bgd. selection expression = annulus(19543.385240, 21077.606200, 403.595012, 807.190023, X, Y)
[Tue May 28 03:53:39 2013] Writing fullrun_mos1_xmm0002740101_pi300-10000_pass1_cl_src3.gif
[Tue May 28 03:54:04 2013] Mean detx,y = (4517.23, 4001.92) 
[Tue May 28 03:54:06 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 03:54:21 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 03:54:22 2013] Setting source spectrum file to fullrun_mos1_xmm0002740101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May 28 03:54:22 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0002740101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue May 28 04:03:57 2013] Not generating rmf since there are only 77 counts
[Tue May 28 04:03:57 2013] rmf not generated due to insufficient counts
[Tue May 28 04:21:37 2013] Updating aperture counts using extracted products
[Tue May 28 04:21:37 2013] Total counts from fullrun_mos1_xmm0002740101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 111.00
[Tue May 28 04:21:37 2013] Total counts from fullrun_mos1_xmm0002740101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 217.00
[Tue May 28 04:21:37 2013] Got source and background scale factors 176928.000000, 1308964.000000
[Tue May 28 04:21:37 2013] User source parameters:
  Position = (225.2, 242.8) = 3 54 12.88 23 20 48.6
  Extent = 4.0 (3.3-5.0)", rotation angle = 0
  Source aperture counts = 81.7 +/- 11.6
  Background aperture counts = 29.3
  Rate = 0.003 +/- 0.0004

[Tue May 28 04:21:39 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 04:21:39 2013] Using photon index=1.80, rate=0.00299, arf fullrun_mos1_xmm0002740101_pi300-10000_pass1_cl_src3.arf
[Tue May 28 04:21:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 04:21:39 2013] Updating source flux to 5.1e-14
[Tue May 28 04:21:44 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 28 04:21:52 2013] xmm0002740101/analysis//spectral/fullrun_mos1_xmm0002740101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete