[Sun May  5 18:32:44 2013] Detection parameters:
  Position = (320.5, 233.1) = 12 53 52.57 10 8 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.2 +/- 12.7
  Background counts = 40.9
  Rate = 0.003 +/- 0.0008

[Sun May  5 18:32:44 2013] Off-axis axis estimate = 5.00'
[Sun May  5 18:34:39 2013] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Sun May  5 18:34:39 2013] Initial guess for spatial extent in simple fitting = 8.93"
[Sun May  5 18:34:39 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.959
[Sun May  5 18:34:39 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 8.93"
[Sun May  5 19:08:26 2013] fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_src32.ximg exists
[Sun May  5 19:08:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_src32.csv
[Sun May  5 19:08:26 2013] fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_src32_1.ximg exists
[Sun May  5 19:08:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_src32.csv
[Sun May  5 19:08:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 19:08:27 2013] fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Sun May  5 19:08:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Sun May  5 19:08:27 2013] fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Sun May  5 19:08:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Sun May  5 19:08:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 19:55:43 2013] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 10.154364 pixels away
[Sun May  5 19:55:43 2013] Vigneting correction estimate = 1.000000
[Sun May  5 19:55:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 19:55:43 2013] Assessing source extent using major
[Sun May  5 19:55:43 2013] Source does appear to be extended
[Sun May  5 19:55:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 19:55:56 2013] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Sun May  5 19:55:56 2013] Initial guess for spatial extent in simple fitting = 8.93"
[Sun May  5 19:55:56 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.959
[Sun May  5 19:55:56 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 8.93"
[Sun May  5 20:31:25 2013] fullrun_pn_xmm0001930301_pi300-10000_cl_pass1_src32.ximg exists
[Sun May  5 20:31:25 2013] fullrun_pn_xmm0001930301_pi300-10000_cl_pass1_src32_1.ximg exists
[Sun May  5 20:31:25 2013] Fit fullrun_pn_xmm0001930301_pi300-10000_cl_pass1_src32 appears to have run properly
[Sun May  5 20:31:25 2013] fullrun_pn_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sun May  5 20:31:25 2013] fullrun_pn_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sun May  5 20:31:25 2013] Fit fullrun_pn_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Sun May  5 21:20:31 2013] Spatial fit model total counts = 452.916000, observed total counts = 434.000000
[Sun May  5 21:20:31 2013] Offset between fit and detection position for source 33 = 0.201280 pixels
[Sun May  5 21:20:31 2013] 452.007900 total counts/ 407.812000 bgd. counts: snr = 2.188527
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.201280 pixels
  Position = (320.6, 233.3) = 12 53 52.54 10 8 11.2
  Extent = 6.5 (4.1-9.2)", rotation angle = 0
  Source counts = 44.2 +/- 21.3
  Background counts = 407.8
  Rate = 0.002 +/- 0.001
[Sun May  5 21:20:31 2013] Vigneting correction estimate = 1.000000
[Sun May  5 21:20:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 21:20:31 2013] Assessing source extent using major axis lower bound
[Sun May  5 21:20:31 2013] Source does appear to be extended
[Sun May  5 21:20:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 21:20:47 2013] XMMSAS src. selection expression = ellipse(27845.334200, 20246.776200, 392.233211, 392.233211, 0.000000, X, Y)
[Sun May  5 21:20:47 2013] Writing source region out to fullrun_pn_xmm0001930301_pi300-10000_pass1_cl_src33_src.reg
[Sun May  5 21:20:47 2013] Extracting stamp from image fullrun_pn_xmm0001930301_pi300-10000_cl_sm2.00.img.gz, (298, 211) - (343, 256)
[Sun May  5 21:20:47 2013] XMMSAS bgd. selection expression = annulus(27845.334200, 20246.776200, 653.722019, 1307.444038, X, Y) && !ellipse(27459.539032, 18207.583664, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 21:20:47 2013] Writing fullrun_pn_xmm0001930301_pi300-10000_pass1_cl_src33.gif
[Sun May  5 21:35:20 2013] Mean detx,y = (-269.71, -4469.84) 
[Sun May  5 21:35:22 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May  5 21:35:35 2013] Binned source spectrum to 10 counts/bin
[Sun May  5 21:35:35 2013] Setting source spectrum file to fullrun_pn_xmm0001930301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun May  5 21:35:35 2013] Setting bgd. spectrum file to fullrun_pn_xmm0001930301_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sun May  5 21:54:22 2013] Not generating rmf since there are only 44 counts
[Sun May  5 21:54:22 2013] rmf not generated due to insufficient counts
[Sun May  5 22:19:46 2013] Updating aperture counts using extracted products
[Sun May  5 22:19:46 2013] Total counts from fullrun_pn_xmm0001930301_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 140.00
[Sun May  5 22:19:46 2013] Total counts from fullrun_pn_xmm0001930301_pi300-10000_pass1_cl_src33_bgd.pi.gz = 746.00
[Sun May  5 22:19:46 2013] Got source and background scale factors 486400.000000, 3548895.000000
[Sun May  5 22:19:46 2013] User source parameters:
  Position = (320.6, 233.3) = 12 53 52.54 10 8 11.2
  Extent = 6.5 (4.1-9.2)", rotation angle = 0
  Source aperture counts = 37.8 +/- 12.9
  Background aperture counts = 102.2
  Rate = 0.002 +/- 0.0006

[Sun May  5 22:19:47 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 22:19:47 2013] Using photon index=1.80, rate=0.002, arf fullrun_pn_xmm0001930301_pi300-10000_pass1_cl_src33.arf
[Sun May  5 22:19:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 22:19:47 2013] Updating source flux to 7.4e-15
[Sun May  5 22:19:58 2013] Source 33 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 22:20:02 2013] xmm0001930301/analysis//spectral/fullrun_pn_xmm0001930301_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete