[Sun May 5 18:32:44 2013] Detection parameters: Position = (318.9, 310.5) = 12 53 53.03 10 13 46.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 74.9 +/- 13.9 Background counts = 41.3 Rate = 0.004 +/- 0.0008 [Sun May 5 18:32:44 2013] Off-axis axis estimate = 1.72' [Sun May 5 18:34:39 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting [Sun May 5 18:34:39 2013] Initial guess for spatial extent in simple fitting = 7.29" [Sun May 5 18:34:39 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056 [Sun May 5 18:34:39 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 7.29" [Sun May 5 19:08:26 2013] fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_src30.ximg exists [Sun May 5 19:08:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_src30.csv [Sun May 5 19:08:26 2013] fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_src30_1.ximg exists [Sun May 5 19:08:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_src30.csv [Sun May 5 19:08:26 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_src30_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 19:08:27 2013] fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src30.ximg exists [Sun May 5 19:08:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src30.csv [Sun May 5 19:08:27 2013] fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists [Sun May 5 19:08:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src30.csv [Sun May 5 19:08:27 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 19:55:43 2013] Source 31 is offset by 7.572733 and 6.198017 pixels which is larger than 2 X fitted extent = 0.842812 x 0.842812, not incorporating fit results [Sun May 5 19:55:43 2013] Vigneting correction estimate = 1.000000 [Sun May 5 19:55:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 19:55:43 2013] Assessing source extent using major [Sun May 5 19:55:43 2013] Source does appear to be extended [Sun May 5 19:55:43 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 19:55:56 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting [Sun May 5 19:55:56 2013] Initial guess for spatial extent in simple fitting = 7.29" [Sun May 5 19:55:56 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056 [Sun May 5 19:55:56 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 7.29" [Sun May 5 20:31:25 2013] fullrun_pn_xmm0001930301_pi300-10000_cl_pass1_src30.ximg exists [Sun May 5 20:31:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0001930301_pi300-10000_cl_pass1_src30.csv [Sun May 5 20:31:25 2013] fullrun_pn_xmm0001930301_pi300-10000_cl_pass1_src30_1.ximg exists [Sun May 5 20:31:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0001930301_pi300-10000_cl_pass1_src30.csv [Sun May 5 20:31:25 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0001930301_pi300-10000_cl_pass1_src30_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0001930301_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 20:31:25 2013] fullrun_pn_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists [Sun May 5 20:31:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src30.csv [Sun May 5 20:31:25 2013] fullrun_pn_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists [Sun May 5 20:31:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src30.csv [Sun May 5 20:31:25 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 21:20:31 2013] Source 31 is offset by 7.577285 and 6.198017 pixels which is larger than 2 X fitted extent = 0.842408 x 0.842408, not incorporating fit results [Sun May 5 21:20:31 2013] Vigneting correction estimate = 1.000000 [Sun May 5 21:20:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 21:20:31 2013] Assessing source extent using major [Sun May 5 21:20:31 2013] Source does appear to be extended [Sun May 5 21:20:31 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 21:20:47 2013] XMMSAS src. selection expression = ellipse(27697.859772, 26964.503510, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 21:20:47 2013] Writing source region out to fullrun_pn_xmm0001930301_pi300-10000_pass1_cl_src31_src.reg [Sun May 5 21:20:47 2013] Extracting stamp from image fullrun_pn_xmm0001930301_pi300-10000_cl_sm2.00.img.gz, (281, 273) - (356, 348) [Sun May 5 21:20:47 2013] XMMSAS bgd. selection expression = annulus(27697.859772, 26964.503510, 1087.500000, 2175.000000, X, Y) && !ellipse(30026.181600, 24474.251380, 919.024026, 799.543223, 145.425200, X, Y) [Sun May 5 21:20:47 2013] Writing fullrun_pn_xmm0001930301_pi300-10000_pass1_cl_src31.gif [Sun May 5 21:34:16 2013] Mean detx,y = (-3109.35, 1617.13) [Sun May 5 21:34:19 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 5 21:34:39 2013] Binned source spectrum to 10 counts/bin [Sun May 5 21:34:39 2013] Setting source spectrum file to fullrun_pn_xmm0001930301_pi300-10000_pass1_cl_src31_src_b10.pi.gz [Sun May 5 21:34:39 2013] Setting bgd. spectrum file to fullrun_pn_xmm0001930301_pi300-10000_pass1_cl_src31_bgd.pi.gz [Sun May 5 21:54:06 2013] Not generating rmf since there are only 74 counts [Sun May 5 21:54:06 2013] rmf not generated due to insufficient counts [Sun May 5 22:19:45 2013] Updating aperture counts using extracted products [Sun May 5 22:19:45 2013] Total counts from fullrun_pn_xmm0001930301_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 337.00 [Sun May 5 22:19:45 2013] Total counts from fullrun_pn_xmm0001930301_pi300-10000_pass1_cl_src31_bgd.pi.gz = 2076.00 [Sun May 5 22:19:45 2013] Got source and background scale factors 1289881.000000, 9773072.000000 [Sun May 5 22:19:45 2013] User source parameters: Position = (318.9, 310.5) = 12 53 53.03 10 13 46.0 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 63.0 +/- 19.4 Background aperture counts = 274.0 Rate = 0.003 +/- 0.0009 [Sun May 5 22:19:45 2013] Updating counts from extracted products [Sun May 5 22:19:45 2013] Set source signif. to 63.00/16.55 = 3.81 [Sun May 5 22:19:47 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 22:19:47 2013] Using photon index=1.80, rate=0.00285, arf fullrun_pn_xmm0001930301_pi300-10000_pass1_cl_src31.arf [Sun May 5 22:19:47 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 22:19:47 2013] Updating source flux to 9.2e-15 [Sun May 5 22:19:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun May 5 22:20:02 2013] xmm0001930301/analysis//spectral/fullrun_pn_xmm0001930301_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete