[Sun May  5 18:33:19 2013] Detection parameters:
  Position = (245.5, 342.8) = 12 54 14.68 10 16 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.4 +/- 16.8
  Background counts = 13.1
  Rate = 0.01 +/- 0.0009

[Sun May  5 18:33:20 2013] Off-axis axis estimate = 5.01'
[Sun May  5 19:30:26 2013] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Sun May  5 19:30:26 2013] Initial guess for spatial extent in simple fitting = 8.93"
[Sun May  5 19:30:26 2013] source mask rpix=2.1, npix_max = 26, mask sum = 21, frac = 0.805
[Sun May  5 19:30:26 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.93"
[Sun May  5 19:55:36 2013] fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_src2.ximg exists
[Sun May  5 19:55:36 2013] fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun May  5 19:55:36 2013] Fit fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_src2 appears to have run properly
[Sun May  5 19:55:36 2013] fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun May  5 19:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May  5 19:55:36 2013] fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun May  5 19:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May  5 19:55:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 19:55:48 2013] Spatial fit model total counts = 305.490000, observed total counts = 279.000000
[Sun May  5 19:55:48 2013] Offset between fit and detection position for source 6 = 0.455826 pixels
[Sun May  5 19:55:48 2013] 301.110000 total counts/ 146.206000 bgd. counts: snr = 12.810912
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.455826 pixels
  Position = (245.1, 342.7) = 12 54 14.80 10 16 7.0
  Extent = 8.0 (6.3-10.0)" x 4.7 (3.8-5.9)", rotation angle = 4 (348-21) degrees
  Source counts = 154.9 +/- 17.4
  Background counts = 146.2
  Rate = 0.006 +/- 0.0007
[Sun May  5 19:55:48 2013] Vigneting correction estimate = 1.000000
[Sun May  5 19:55:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 19:55:48 2013] Assessing source extent using major axis lower bound
[Sun May  5 19:55:48 2013] Source does appear to be extended
[Sun May  5 19:55:48 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.06
[Sun May  5 20:51:43 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 20:51:43 2013] Initial guess for spatial extent in simple fitting = 6.34"
[Sun May  5 20:51:43 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.043
[Sun May  5 20:51:43 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 6.34"
[Sun May  5 21:20:24 2013] fullrun_mos2_xmm0001930301_pi300-10000_cl_pass1_src2.ximg exists
[Sun May  5 21:20:24 2013] fullrun_mos2_xmm0001930301_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun May  5 21:20:24 2013] Fit fullrun_mos2_xmm0001930301_pi300-10000_cl_pass1_src2 appears to have run properly
[Sun May  5 21:20:24 2013] fullrun_mos2_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun May  5 21:20:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May  5 21:20:24 2013] fullrun_mos2_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun May  5 21:20:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May  5 21:20:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 21:20:37 2013] Spatial fit model total counts = 311.180000, observed total counts = 286.000000
[Sun May  5 21:20:37 2013] Offset between fit and detection position for source 6 = 0.007068 pixels
[Sun May  5 21:20:37 2013] 306.838000 total counts/ 156.545000 bgd. counts: snr = 12.012106
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.007068 pixels
  Position = (245.1, 342.7) = 12 54 14.80 10 16 7.0
  Extent = 7.8 (6.1-9.8)" x 4.6 (3.7-5.8)", rotation angle = 4 (348-22) degrees
  Source counts = 150.3 +/- 17.5
  Background counts = 156.5
  Rate = 0.006 +/- 0.0007
[Sun May  5 21:20:37 2013] Vigneting correction estimate = 1.000000
[Sun May  5 21:20:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 21:20:37 2013] Assessing source extent using major axis lower bound
[Sun May  5 21:20:37 2013] Source does appear to be extended
[Sun May  5 21:20:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.06
[Sun May  5 22:06:24 2013] XMMSAS src. selection expression = ellipse(21271.212320, 29763.985600, 466.914613, 275.628008, 4.408167, X, Y)
[Sun May  5 22:06:24 2013] Writing source region out to fullrun_mos2_xmm0001930301_pi300-10000_pass1_cl_src6_src.reg
[Sun May  5 22:06:24 2013] Extracting stamp from image fullrun_mos2_xmm0001930301_pi300-10000_cl_sm2.00.img.gz, (218, 316) - (272, 370)
[Sun May  5 22:06:24 2013] XMMSAS bgd. selection expression = annulus(21271.212320, 29763.985600, 778.191022, 1556.382045, X, Y)
[Sun May  5 22:06:24 2013] Writing fullrun_mos2_xmm0001930301_pi300-10000_pass1_cl_src6.gif
[Sun May  5 22:06:37 2013] Mean detx,y = (-1310.58, -7111.22) 
[Sun May  5 22:06:38 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May  5 22:06:48 2013] Binned source spectrum to 10 counts/bin
[Sun May  5 22:06:48 2013] Setting source spectrum file to fullrun_mos2_xmm0001930301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun May  5 22:06:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0001930301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun May  5 22:19:49 2013] Updating aperture counts using extracted products
[Sun May  5 22:19:49 2013] Total counts from fullrun_mos2_xmm0001930301_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 187.00
[Sun May  5 22:19:49 2013] Total counts from fullrun_mos2_xmm0001930301_pi300-10000_pass1_cl_src6_bgd.pi.gz = 340.00
[Sun May  5 22:19:49 2013] Got source and background scale factors 398268.000000, 4808263.000000
[Sun May  5 22:19:49 2013] User source parameters:
  Position = (245.1, 342.7) = 12 54 14.80 10 16 7.0
  Extent = 7.8 (6.1-9.8)" x 4.6 (3.7-5.8)", rotation angle = 4 (348-22) degrees
  Source aperture counts = 158.8 +/- 14.7
  Background aperture counts = 28.2
  Rate = 0.006 +/- 0.0006

[Sun May  5 22:19:52 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 22:19:52 2013] Using photon index=1.80, rate=0.0061, arf fullrun_mos2_xmm0001930301_pi300-10000_pass1_cl_src6.arf
[Sun May  5 22:19:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 22:19:52 2013] Updating source flux to 1.1e-13
[Sun May  5 22:19:58 2013] xmm0001930301/analysis//spectral/fullrun_mos2_xmm0001930301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete