[Sun May  5 18:33:19 2013] Detection parameters:
  Position = (165.7, 212.7) = 12 54 38.17 10 6 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.0 +/- 12.2
  Background counts = 11.7
  Rate = 0.004 +/- 0.0005

[Sun May  5 18:33:20 2013] Off-axis axis estimate = 11.46'
[Sun May  5 19:30:26 2013] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Sun May  5 19:30:26 2013] Initial guess for spatial extent in simple fitting = 12.16"
[Sun May  5 19:30:26 2013] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.129
[Sun May  5 19:30:26 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 12.16"
[Sun May  5 19:55:36 2013] fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_src13.ximg exists
[Sun May  5 19:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_src13.csv
[Sun May  5 19:55:36 2013] fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun May  5 19:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_src13.csv
[Sun May  5 19:55:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 19:55:36 2013] fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun May  5 19:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun May  5 19:55:36 2013] fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun May  5 19:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun May  5 19:55:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 19:55:48 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 15.132017 pixels away
[Sun May  5 19:55:48 2013] Vigneting correction estimate = 1.000000
[Sun May  5 19:55:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 19:55:48 2013] Assessing source extent using major
[Sun May  5 19:55:48 2013] Source does appear to be extended
[Sun May  5 19:55:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 20:51:43 2013] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Sun May  5 20:51:43 2013] Initial guess for spatial extent in simple fitting = 12.16"
[Sun May  5 20:51:43 2013] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.129
[Sun May  5 20:51:43 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 12.16"
[Sun May  5 21:20:24 2013] fullrun_mos2_xmm0001930301_pi300-10000_cl_pass1_src13.ximg exists
[Sun May  5 21:20:24 2013] fullrun_mos2_xmm0001930301_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun May  5 21:20:24 2013] Fit fullrun_mos2_xmm0001930301_pi300-10000_cl_pass1_src13 appears to have run properly
[Sun May  5 21:20:24 2013] fullrun_mos2_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun May  5 21:20:24 2013] fullrun_mos2_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun May  5 21:20:24 2013] Fit fullrun_mos2_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sun May  5 21:20:37 2013] Spatial fit model total counts = 230.709000, observed total counts = 216.000000
[Sun May  5 21:20:37 2013] Offset between fit and detection position for source 11 = 0.123950 pixels
[Sun May  5 21:20:37 2013] 230.272300 total counts/ 182.301000 bgd. counts: snr = 3.552933
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.123950 pixels
  Position = (165.8, 212.8) = 12 54 38.15 10 6 42.0
  Extent = 5.3 (3.8-7.5)", rotation angle = 41 (13-64) degrees
  Source counts = 48.0 +/- 15.2
  Background counts = 182.3
  Rate = 0.002 +/- 0.0006
[Sun May  5 21:20:37 2013] Vigneting correction estimate = 1.000000
[Sun May  5 21:20:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 21:20:37 2013] Assessing source extent using major axis lower bound
[Sun May  5 21:20:37 2013] Source does appear to be extended
[Sun May  5 21:20:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Sun May  5 22:06:24 2013] XMMSAS src. selection expression = ellipse(14374.741600, 18465.516600, 316.583409, 182.348405, 40.773200, X, Y)
[Sun May  5 22:06:24 2013] Writing source region out to fullrun_mos2_xmm0001930301_pi300-10000_pass1_cl_src11_src.reg
[Sun May  5 22:06:24 2013] Extracting stamp from image fullrun_mos2_xmm0001930301_pi300-10000_cl_sm2.00.img.gz, (148, 195) - (184, 231)
[Sun May  5 22:06:24 2013] XMMSAS bgd. selection expression = annulus(14374.741600, 18465.516600, 527.639015, 1055.278030, X, Y) && !ellipse(12948.104706, 19938.710556, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 22:06:24 2013] Writing fullrun_mos2_xmm0001930301_pi300-10000_pass1_cl_src11.gif
[Sun May  5 22:09:37 2013] Mean detx,y = (-12446.81, 33.79) 
[Sun May  5 22:09:37 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May  5 22:09:42 2013] Binned source spectrum to 10 counts/bin
[Sun May  5 22:09:42 2013] Setting source spectrum file to fullrun_mos2_xmm0001930301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun May  5 22:09:42 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0001930301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun May  5 22:18:34 2013] Not generating rmf since there are only 47 counts
[Sun May  5 22:18:34 2013] rmf not generated due to insufficient counts
[Sun May  5 22:19:51 2013] Updating aperture counts using extracted products
[Sun May  5 22:19:51 2013] Total counts from fullrun_mos2_xmm0001930301_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 62.00
[Sun May  5 22:19:51 2013] Total counts from fullrun_mos2_xmm0001930301_pi300-10000_pass1_cl_src11_bgd.pi.gz = 165.00
[Sun May  5 22:19:51 2013] Got source and background scale factors 185600.000000, 2338064.000000
[Sun May  5 22:19:51 2013] User source parameters:
  Position = (165.8, 212.8) = 12 54 38.15 10 6 42.0
  Extent = 5.3 (3.8-7.5)", rotation angle = 41 (13-64) degrees
  Source aperture counts = 48.9 +/- 8.9
  Background aperture counts = 13.1
  Rate = 0.002 +/- 0.0004

[Sun May  5 22:19:52 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 22:19:52 2013] Using photon index=1.80, rate=0.00195, arf fullrun_mos2_xmm0001930301_pi300-10000_pass1_cl_src11.arf
[Sun May  5 22:19:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 22:19:52 2013] Updating source flux to 5.7e-14
[Sun May  5 22:19:56 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 22:19:58 2013] xmm0001930301/analysis//spectral/fullrun_mos2_xmm0001930301_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete