[Sun May 5 18:33:02 2013] Detection parameters: Position = (453.6, 389.0) = 12 53 13.33 10 19 28.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 253.2 +/- 18.9 Background counts = 9.7 Rate = 0.01 +/- 0.0008 [Sun May 5 18:33:03 2013] Off-axis axis estimate = 13.03' [Sun May 5 19:08:27 2013] Using EEF radius (= 12.94 ")to estimate initial spatial extent for simple fitting [Sun May 5 19:08:27 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun May 5 19:08:27 2013] Initial guess for spatial extent in simple fitting = 12.94" [Sun May 5 19:08:27 2013] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.870 [Sun May 5 19:08:27 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 12.94" [Sun May 5 19:30:25 2013] fullrun_mos1_xmm0001930301_pi300-10000_cl_pass0_src3.ximg exists [Sun May 5 19:30:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001930301_pi300-10000_cl_pass0_src3.csv [Sun May 5 19:30:25 2013] fullrun_mos1_xmm0001930301_pi300-10000_cl_pass0_src3_1.ximg exists [Sun May 5 19:30:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001930301_pi300-10000_cl_pass0_src3.csv [Sun May 5 19:30:25 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0001930301_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0001930301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 19:30:26 2013] fullrun_mos1_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Sun May 5 19:30:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src3.csv [Sun May 5 19:30:26 2013] fullrun_mos1_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Sun May 5 19:30:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src3.csv [Sun May 5 19:30:26 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0001930301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 19:55:45 2013] Spatial fit model total counts = 362.772000, observed total counts = 327.000000 [Sun May 5 19:55:45 2013] Poor agreement between spatial fit and data for source 2 It may help to tweak spatial fit manually Not incorporating fit results [Sun May 5 19:55:45 2013] Vigneting correction estimate = 1.000000 [Sun May 5 19:55:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 19:55:45 2013] Assessing source extent using major [Sun May 5 19:55:45 2013] Source does appear to be extended [Sun May 5 19:55:45 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 20:31:25 2013] Using EEF radius (= 12.94 ")to estimate initial spatial extent for simple fitting [Sun May 5 20:31:25 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun May 5 20:31:25 2013] Initial guess for spatial extent in simple fitting = 12.94" [Sun May 5 20:31:25 2013] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.870 [Sun May 5 20:31:25 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 12.94" [Sun May 5 20:51:43 2013] fullrun_mos1_xmm0001930301_pi300-10000_cl_pass1_src3.ximg exists [Sun May 5 20:51:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001930301_pi300-10000_cl_pass1_src3.csv [Sun May 5 20:51:43 2013] fullrun_mos1_xmm0001930301_pi300-10000_cl_pass1_src3_1.ximg exists [Sun May 5 20:51:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001930301_pi300-10000_cl_pass1_src3.csv [Sun May 5 20:51:43 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0001930301_pi300-10000_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0001930301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 20:51:43 2013] fullrun_mos1_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Sun May 5 20:51:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src3.csv [Sun May 5 20:51:43 2013] fullrun_mos1_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Sun May 5 20:51:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src3.csv [Sun May 5 20:51:43 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0001930301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 21:20:34 2013] Spatial fit model total counts = 362.568000, observed total counts = 327.000000 [Sun May 5 21:20:34 2013] Poor agreement between spatial fit and data for source 2 It may help to tweak spatial fit manually Not incorporating fit results [Sun May 5 21:20:34 2013] Vigneting correction estimate = 1.000000 [Sun May 5 21:20:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 21:20:34 2013] Assessing source extent using major [Sun May 5 21:20:34 2013] Source does appear to be extended [Sun May 5 21:20:34 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 21:54:58 2013] XMMSAS src. selection expression = ellipse(39415.064270, 33793.780487, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 21:54:58 2013] Writing source region out to fullrun_mos1_xmm0001930301_pi300-10000_pass1_cl_src2_src.reg [Sun May 5 21:54:58 2013] Extracting stamp from image fullrun_mos1_xmm0001930301_pi300-10000_cl_sm2.00.img.gz, (416, 351) - (491, 426) [Sun May 5 21:54:58 2013] XMMSAS bgd. selection expression = annulus(39415.064270, 33793.780487, 1087.500000, 2175.000000, X, Y) [Sun May 5 21:54:58 2013] Writing fullrun_mos1_xmm0001930301_pi300-10000_pass1_cl_src2.gif [Sun May 5 21:55:28 2013] Mean detx,y = (-2513.20, -16899.30) [Sun May 5 21:55:29 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 5 21:55:45 2013] Binned source spectrum to 10 counts/bin [Sun May 5 21:55:46 2013] Setting source spectrum file to fullrun_mos1_xmm0001930301_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Sun May 5 21:55:46 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0001930301_pi300-10000_pass1_cl_src2_bgd.pi.gz [Sun May 5 22:02:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun May 5 22:02:13 2013] rmf not generated due to insufficient counts [Sun May 5 22:19:47 2013] Updating aperture counts using extracted products [Sun May 5 22:19:47 2013] Total counts from fullrun_mos1_xmm0001930301_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 259.00 [Sun May 5 22:19:47 2013] Total counts from fullrun_mos1_xmm0001930301_pi300-10000_pass1_cl_src2_bgd.pi.gz = 307.00 [Sun May 5 22:19:47 2013] Got source and background scale factors 990598.000000, 5848749.000000 [Sun May 5 22:19:47 2013] User source parameters: Position = (453.6, 389.0) = 12 53 13.33 10 19 28.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 207.0 +/- 17.1 Background aperture counts = 52.0 Rate = 0.008 +/- 0.0007 [Sun May 5 22:19:47 2013] Updating counts from extracted products [Sun May 5 22:19:47 2013] Set source signif. to 207.00/7.21 = 28.71 [Sun May 5 22:19:49 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 22:19:49 2013] Using photon index=1.80, rate=0.00841, arf fullrun_mos1_xmm0001930301_pi300-10000_pass1_cl_src2.arf [Sun May 5 22:19:49 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 22:19:49 2013] Updating source flux to 3.6e-13 [Sun May 5 22:19:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun May 5 22:19:56 2013] xmm0001930301/analysis//spectral/fullrun_mos1_xmm0001930301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete