[Mon Aug 27 20:46:12 2012] Detection parameters:
  Position = (360.7, 274.8) = 6 37 9.53 6 4 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.2 +/- 13.3
  Background counts = 17.0
  Rate = 0.005 +/- 0.0007

[Mon Aug 27 20:46:12 2012] Off-axis axis estimate = 4.83'
[Mon Aug 27 21:30:21 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 21:30:21 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Mon Aug 27 21:30:21 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.974
[Mon Aug 27 21:30:21 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.84"
[Mon Aug 27 21:50:17 2012] fullrun_mos2_xmm0001730601_pi300-10000_cl_pass0_src3.ximg exists
[Mon Aug 27 21:50:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0001730601_pi300-10000_cl_pass0_src3.csv
[Mon Aug 27 21:50:17 2012] fullrun_mos2_xmm0001730601_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Aug 27 21:50:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0001730601_pi300-10000_cl_pass0_src3.csv
[Mon Aug 27 21:50:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0001730601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0001730601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 21:50:17 2012] fullrun_mos2_xmm0001730601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Aug 27 21:50:17 2012] fullrun_mos2_xmm0001730601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Aug 27 21:50:17 2012] Fit fullrun_mos2_xmm0001730601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Aug 27 21:50:27 2012] Spatial fit model total counts = 242.327000, observed total counts = 241.000000
[Mon Aug 27 21:50:27 2012] Offset between fit and detection position for source 3 = 0.074679 pixels
[Mon Aug 27 21:50:27 2012] 234.305200 total counts/ 187.822000 bgd. counts: snr = 3.391742
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.074679 pixels
  Position = (360.8, 274.8) = 6 37 9.51 6 4 58.5
  Extent = 3.7 (2.8-6.9)", rotation angle = 0
  Source counts = 46.5 +/- 15.3
  Background counts = 187.8
  Rate = 0.002 +/- 0.0007
[Mon Aug 27 21:50:27 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 21:50:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 21:50:27 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 21:50:27 2012] Source does appear to be extended
[Mon Aug 27 21:50:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 22:19:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 27 22:19:44 2012] Initial guess for spatial extent in simple fitting = 3.75"
[Mon Aug 27 22:19:44 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.213
[Mon Aug 27 22:19:44 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 3.75"
[Mon Aug 27 22:39:26 2012] fullrun_mos2_xmm0001730601_pi300-10000_cl_pass1_src3.ximg exists
[Mon Aug 27 22:39:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0001730601_pi300-10000_cl_pass1_src3.csv
[Mon Aug 27 22:39:26 2012] fullrun_mos2_xmm0001730601_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Aug 27 22:39:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0001730601_pi300-10000_cl_pass1_src3.csv
[Mon Aug 27 22:39:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0001730601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0001730601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 22:39:26 2012] fullrun_mos2_xmm0001730601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Aug 27 22:39:26 2012] fullrun_mos2_xmm0001730601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Aug 27 22:39:26 2012] Fit fullrun_mos2_xmm0001730601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Aug 27 22:39:34 2012] Spatial fit model total counts = 234.447000, observed total counts = 233.000000
[Mon Aug 27 22:39:34 2012] Offset between fit and detection position for source 3 = 0.028571 pixels
[Mon Aug 27 22:39:34 2012] 227.903400 total counts/ 181.930000 bgd. counts: snr = 3.408431
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.028571 pixels
  Position = (360.8, 274.8) = 6 37 9.50 6 4 58.5
  Extent = 3.7 (2.8-6.4)", rotation angle = 0
  Source counts = 46.0 +/- 15.1
  Background counts = 181.9
  Rate = 0.002 +/- 0.0007
[Mon Aug 27 22:39:34 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 22:39:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 22:39:34 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 22:39:34 2012] Source does appear to be extended
[Mon Aug 27 22:39:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 22:54:13 2012] XMMSAS src. selection expression = ellipse(31343.323460, 23857.321000, 221.011206, 221.011206, 0.000000, X, Y)
[Mon Aug 27 22:54:13 2012] Writing source region out to fullrun_mos2_xmm0001730601_pi300-10000_pass1_cl_src3_src.reg
[Mon Aug 27 22:54:13 2012] Extracting stamp from image fullrun_mos2_xmm0001730601_pi300-10000_cl_sm2.00.img.gz, (348, 262) - (374, 287)
[Mon Aug 27 22:54:13 2012] XMMSAS bgd. selection expression = annulus(31343.323460, 23857.321000, 368.352011, 736.704021, X, Y) && !ellipse(30392.828200, 23071.922800, 1153.696033, 1153.696033, 0.000000, X, Y)
[Mon Aug 27 22:54:13 2012] Writing fullrun_mos2_xmm0001730601_pi300-10000_pass1_cl_src3.gif
[Mon Aug 27 22:54:37 2012] Mean detx,y = (-4258.43, -3634.90) 
[Mon Aug 27 22:54:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 22:54:43 2012] grppha failed
[Mon Aug 27 22:54:43 2012] Setting source spectrum file to fullrun_mos2_xmm0001730601_pi300-10000_pass1_cl_src3_src.pi.gz
[Mon Aug 27 22:54:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0001730601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Aug 27 22:56:34 2012] Not generating rmf since there are only 45 counts
[Mon Aug 27 22:56:34 2012] rmf not generated due to insufficient counts
[Mon Aug 27 22:57:02 2012] Updating aperture counts using extracted products
[Mon Aug 27 22:57:02 2012] Error reading totcts from fullrun_mos2_xmm0001730601_pi300-10000_pass1_cl_src3_src.pi.gz
[Mon Aug 27 22:57:03 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 22:57:04 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Aug 27 22:57:05 2012] xmm0001730601/analysis//spectral/fullrun_mos2_xmm0001730601_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete