[Mon Aug 27 20:46:12 2012] Detection parameters:
  Position = (351.8, 264.4) = 6 37 12.15 6 4 11.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.5 +/- 9.9
  Background counts = 17.5
  Rate = 0.002 +/- 0.0005

[Mon Aug 27 20:46:12 2012] Off-axis axis estimate = 4.59'
[Mon Aug 27 21:30:21 2012] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 21:30:21 2012] Initial guess for spatial extent in simple fitting = 8.72"
[Mon Aug 27 21:30:21 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.996
[Mon Aug 27 21:30:21 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.72"
[Mon Aug 27 21:50:17 2012] fullrun_mos2_xmm0001730601_pi300-10000_cl_pass0_src15.ximg exists
[Mon Aug 27 21:50:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0001730601_pi300-10000_cl_pass0_src15.csv
[Mon Aug 27 21:50:17 2012] fullrun_mos2_xmm0001730601_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon Aug 27 21:50:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0001730601_pi300-10000_cl_pass0_src15.csv
[Mon Aug 27 21:50:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0001730601_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0001730601_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 21:50:18 2012] fullrun_mos2_xmm0001730601_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon Aug 27 21:50:18 2012] fullrun_mos2_xmm0001730601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Aug 27 21:50:18 2012] Fit fullrun_mos2_xmm0001730601_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Aug 27 21:50:27 2012] Source 10 is offset by 4.645814 and -7.105244 pixels which is larger than
2 X fitted extent = 0.934547 x 0.934547, not incorporating fit results
[Mon Aug 27 21:50:27 2012] Spatial fit model total counts = 229.030000, observed total counts = 230.000000
[Mon Aug 27 21:50:27 2012] Offset between fit and detection position for source 10 = 2.282124 pixels
[Mon Aug 27 21:50:27 2012] 224.471200 total counts/ 146.492000 bgd. counts: snr = 6.442758
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 2.282124 pixels
  Position = (349.9, 265.8) = 6 37 12.69 6 4 19.2
  Extent = 14.4 (9.2-17.4)", rotation angle = 0
  Source counts = 78.0 +/- 15.0
  Background counts = 146.5
  Rate = 0.004 +/- 0.0007
[Mon Aug 27 21:50:27 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 21:50:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 21:50:27 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 21:50:27 2012] Source does appear to be extended
[Mon Aug 27 21:50:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 22:19:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 27 22:19:44 2012] Initial guess for spatial extent in simple fitting = 14.42"
[Mon Aug 27 22:19:44 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.099
[Mon Aug 27 22:19:44 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 14.42"
[Mon Aug 27 22:39:26 2012] fullrun_mos2_xmm0001730601_pi300-10000_cl_pass1_src14.ximg exists
[Mon Aug 27 22:39:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0001730601_pi300-10000_cl_pass1_src14.csv
[Mon Aug 27 22:39:26 2012] fullrun_mos2_xmm0001730601_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon Aug 27 22:39:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0001730601_pi300-10000_cl_pass1_src14.csv
[Mon Aug 27 22:39:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0001730601_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0001730601_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 22:39:26 2012] fullrun_mos2_xmm0001730601_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon Aug 27 22:39:26 2012] fullrun_mos2_xmm0001730601_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Aug 27 22:39:26 2012] Fit fullrun_mos2_xmm0001730601_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Mon Aug 27 22:39:34 2012] Warning, spatial fit 14 centroid is now closest to src. 7
[Mon Aug 27 22:39:34 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 22:39:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 22:39:34 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 22:39:34 2012] Source does appear to be extended
[Mon Aug 27 22:39:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 22:54:13 2012] XMMSAS src. selection expression = ellipse(30392.828200, 23071.922800, 865.272025, 865.272025, 0.000000, X, Y)
[Mon Aug 27 22:54:13 2012] Writing source region out to fullrun_mos2_xmm0001730601_pi300-10000_pass1_cl_src10_src.reg
[Mon Aug 27 22:54:13 2012] Extracting stamp from image fullrun_mos2_xmm0001730601_pi300-10000_cl_sm2.00.img.gz, (300, 216) - (400, 315)
[Mon Aug 27 22:54:13 2012] XMMSAS bgd. selection expression = annulus(30392.828200, 23071.922800, 1442.120041, 2884.240083, X, Y) && !ellipse(31343.323460, 23857.321000, 294.681608, 294.681608, 0.000000, X, Y) && !ellipse(34229.328000, 21914.285600, 1455.064042, 1455.064042, 0.000000, X, Y)
[Mon Aug 27 22:54:13 2012] Writing fullrun_mos2_xmm0001730601_pi300-10000_pass1_cl_src10.gif
[Mon Aug 27 22:56:08 2012] Mean detx,y = (-3317.47, -4414.56) 
[Mon Aug 27 22:56:09 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 22:56:23 2012] grppha failed
[Mon Aug 27 22:56:23 2012] Setting source spectrum file to fullrun_mos2_xmm0001730601_pi300-10000_pass1_cl_src10_src.pi.gz
[Mon Aug 27 22:56:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0001730601_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Aug 27 22:56:34 2012] Not generating rmf since there are only 77 counts
[Mon Aug 27 22:56:34 2012] rmf not generated due to insufficient counts
[Mon Aug 27 22:57:02 2012] Updating aperture counts using extracted products
[Mon Aug 27 22:57:03 2012] Error reading totcts from fullrun_mos2_xmm0001730601_pi300-10000_pass1_cl_src10_src.pi.gz
[Mon Aug 27 22:57:03 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 22:57:04 2012] Flag b found in src. 10 procflags, skipping spectral fitting
[Mon Aug 27 22:57:04 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Aug 27 22:57:05 2012] xmm0001730601/analysis//spectral/fullrun_mos2_xmm0001730601_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete