[Mon Aug 27 20:45:51 2012] Detection parameters:
  Position = (260.6, 318.4) = 6 37 38.75 6 8 9.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.8 +/- 10.0
  Background counts = 14.7
  Rate = 0.003 +/- 0.0006

[Mon Aug 27 20:45:52 2012] Off-axis axis estimate = 3.10'
[Mon Aug 27 21:16:34 2012] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 21:16:34 2012] Initial guess for spatial extent in simple fitting = 7.98"
[Mon Aug 27 21:16:34 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.147
[Mon Aug 27 21:16:34 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.98"
[Mon Aug 27 21:30:21 2012] fullrun_mos1_xmm0001730601_pi300-10000_cl_pass0_src7.ximg exists
[Mon Aug 27 21:30:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0001730601_pi300-10000_cl_pass0_src7.csv
[Mon Aug 27 21:30:21 2012] fullrun_mos1_xmm0001730601_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Aug 27 21:30:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0001730601_pi300-10000_cl_pass0_src7.csv
[Mon Aug 27 21:30:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0001730601_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0001730601_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 21:30:21 2012] fullrun_mos1_xmm0001730601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Aug 27 21:30:21 2012] fullrun_mos1_xmm0001730601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Aug 27 21:30:21 2012] Fit fullrun_mos1_xmm0001730601_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Aug 27 21:50:24 2012] Spatial fit model total counts = 180.000000, observed total counts = 180.000000
[Mon Aug 27 21:50:24 2012] Offset between fit and detection position for source 4 = 0.757556 pixels
[Mon Aug 27 21:50:24 2012] 179.154300 total counts/ 126.617000 bgd. counts: snr = 4.668977
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.757556 pixels
  Position = (261.3, 318.4) = 6 37 38.53 6 8 8.4
  Extent = 8.7 (5.7-11.4)", rotation angle = 0
  Source counts = 52.5 +/- 13.4
  Background counts = 126.6
  Rate = 0.003 +/- 0.0007
[Mon Aug 27 21:50:24 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 21:50:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 21:50:24 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 21:50:24 2012] Source does appear to be extended
[Mon Aug 27 21:50:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 22:09:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 27 22:09:44 2012] Initial guess for spatial extent in simple fitting = 8.66"
[Mon Aug 27 22:09:44 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.007
[Mon Aug 27 22:09:44 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.66"
[Mon Aug 27 22:19:44 2012] fullrun_mos1_xmm0001730601_pi300-10000_cl_pass1_src7.ximg exists
[Mon Aug 27 22:19:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001730601_pi300-10000_cl_pass1_src7.csv
[Mon Aug 27 22:19:44 2012] fullrun_mos1_xmm0001730601_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Aug 27 22:19:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001730601_pi300-10000_cl_pass1_src7.csv
[Mon Aug 27 22:19:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0001730601_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0001730601_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 22:19:44 2012] fullrun_mos1_xmm0001730601_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Aug 27 22:19:44 2012] fullrun_mos1_xmm0001730601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Aug 27 22:19:44 2012] Fit fullrun_mos1_xmm0001730601_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Aug 27 22:39:31 2012] Spatial fit model total counts = 180.000000, observed total counts = 180.000000
[Mon Aug 27 22:39:31 2012] Offset between fit and detection position for source 4 = 0.000362 pixels
[Mon Aug 27 22:39:31 2012] 179.153900 total counts/ 126.602000 bgd. counts: snr = 4.670551
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.000362 pixels
  Position = (261.3, 318.4) = 6 37 38.53 6 8 8.4
  Extent = 8.7 (5.7-11.3)", rotation angle = 0
  Source counts = 52.6 +/- 13.4
  Background counts = 126.6
  Rate = 0.003 +/- 0.0007
[Mon Aug 27 22:39:31 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 22:39:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 22:39:31 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 22:39:31 2012] Source does appear to be extended
[Mon Aug 27 22:39:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 22:52:19 2012] XMMSAS src. selection expression = ellipse(22685.177600, 27655.404800, 519.825015, 519.825015, 0.000000, X, Y)
[Mon Aug 27 22:52:19 2012] Writing source region out to fullrun_mos1_xmm0001730601_pi300-10000_pass1_cl_src4_src.reg
[Mon Aug 27 22:52:19 2012] Extracting stamp from image fullrun_mos1_xmm0001730601_pi300-10000_cl_sm2.00.img.gz, (231, 289) - (291, 348)
[Mon Aug 27 22:52:20 2012] XMMSAS bgd. selection expression = annulus(22685.177600, 27655.404800, 866.375025, 1732.750050, X, Y)
[Mon Aug 27 22:52:20 2012] Writing fullrun_mos1_xmm0001730601_pi300-10000_pass1_cl_src4.gif
[Mon Aug 27 22:53:37 2012] Mean detx,y = (299.36, -4612.60) 
[Mon Aug 27 22:53:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 22:53:47 2012] grppha failed
[Mon Aug 27 22:53:47 2012] Setting source spectrum file to fullrun_mos1_xmm0001730601_pi300-10000_pass1_cl_src4_src.pi.gz
[Mon Aug 27 22:53:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0001730601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Aug 27 22:54:13 2012] Not generating rmf since there are only 52 counts
[Mon Aug 27 22:54:13 2012] rmf not generated due to insufficient counts
[Mon Aug 27 22:57:02 2012] Updating aperture counts using extracted products
[Mon Aug 27 22:57:02 2012] Error reading totcts from fullrun_mos1_xmm0001730601_pi300-10000_pass1_cl_src4_src.pi.gz
[Mon Aug 27 22:57:02 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 22:57:03 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Aug 27 22:57:04 2012] xmm0001730601/analysis//spectral/fullrun_mos1_xmm0001730601_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete