[Wed Jun 5 08:10:26 2013] Detection parameters: Position = (298.1, 280.8) = 17 34 38.02 -32 34 40.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 172.1 +/- 20.8 Background counts = 55.3 Rate = 0.009 +/- 0.001 [Wed Jun 5 08:10:26 2013] Off-axis axis estimate = 1.28' [Wed Jun 5 08:13:08 2013] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 08:13:08 2013] Initial guess for spatial extent in simple fitting = 7.07" [Wed Jun 5 08:13:08 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.886 [Wed Jun 5 08:13:08 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 7.07" [Wed Jun 5 09:42:35 2013] fullrun_pn_xmm0001730201_pi300-10000_cl_pass0_src26.ximg exists [Wed Jun 5 09:42:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0001730201_pi300-10000_cl_pass0_src26.csv [Wed Jun 5 09:42:35 2013] fullrun_pn_xmm0001730201_pi300-10000_cl_pass0_src26_1.ximg exists [Wed Jun 5 09:42:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0001730201_pi300-10000_cl_pass0_src26.csv [Wed Jun 5 09:42:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0001730201_pi300-10000_cl_pass0_src26_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0001730201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 09:42:36 2013] fullrun_pn_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists [Wed Jun 5 09:42:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src26.csv [Wed Jun 5 09:42:36 2013] fullrun_pn_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists [Wed Jun 5 09:42:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src26.csv [Wed Jun 5 09:42:36 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 11:41:00 2013] Warning, spatial fit 26 centroid is now closest to src. 42 [Wed Jun 5 11:41:00 2013] Source 28 is offset by 7.317326 and -1.911616 pixels which is larger than 2 X fitted extent = 4.076543 x 2.990363, not incorporating fit results [Wed Jun 5 11:41:00 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 11:41:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 11:41:00 2013] Assessing source extent using major [Wed Jun 5 11:41:00 2013] Source does appear to be extended [Wed Jun 5 11:41:00 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 11:41:00 2013] Source is confused with source 42 [Wed Jun 5 11:41:20 2013] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 11:41:20 2013] Initial guess for spatial extent in simple fitting = 7.07" [Wed Jun 5 11:41:20 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.886 [Wed Jun 5 11:41:20 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 7.07" [Wed Jun 5 12:47:29 2013] fullrun_pn_xmm0001730201_pi300-10000_cl_pass1_src23.ximg exists [Wed Jun 5 12:47:29 2013] fullrun_pn_xmm0001730201_pi300-10000_cl_pass1_src23_1.ximg exists [Wed Jun 5 12:47:29 2013] Fit fullrun_pn_xmm0001730201_pi300-10000_cl_pass1_src23 appears to have run properly [Wed Jun 5 12:47:30 2013] fullrun_pn_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists [Wed Jun 5 12:47:30 2013] fullrun_pn_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists [Wed Jun 5 12:47:30 2013] Fit fullrun_pn_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly [Wed Jun 5 15:01:39 2013] Source 28 is offset by 6.552545 and 2.348659 pixels which is larger than 2 X fitted extent = 4.076281 x 6.498529, not incorporating fit results [Wed Jun 5 15:01:39 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 15:01:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 15:01:39 2013] Assessing source extent using major [Wed Jun 5 15:01:39 2013] Source does appear to be extended [Wed Jun 5 15:01:39 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 15:01:59 2013] XMMSAS src. selection expression = ellipse(25882.199402, 24383.281372, 652.500000, 652.500000, 0.000000, X, Y) [Wed Jun 5 15:01:59 2013] Writing source region out to fullrun_pn_xmm0001730201_pi300-10000_pass1_cl_src28_src.reg [Wed Jun 5 15:01:59 2013] Extracting stamp from image fullrun_pn_xmm0001730201_pi300-10000_cl_sm2.00.img.gz, (261, 243) - (336, 318) [Wed Jun 5 15:01:59 2013] XMMSAS bgd. selection expression = annulus(25882.199402, 24383.281372, 1087.500000, 2175.000000, X, Y) && !ellipse(24735.936840, 24049.108200, 1478.126443, 1419.655241, 32.174200, X, Y) && !ellipse(26398.068939, 25088.972229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23373.122320, 24720.271200, 347.644810, 347.644810, 0.000000, X, Y) && !ellipse(26423.506775, 22960.618439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24806.911200, 25294.336800, 634.915218, 186.965605, 62.460200, X, Y) && !ellipse(27461.402863, 25813.205811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23352.410492, 23588.046997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24299.953278, 22778.634766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23701.536224, 27289.131287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26335.408000, 25626.312000, 1089.816031, 1089.816031, 0.000000, X, Y) && !ellipse(25775.345093, 25007.558411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28862.355621, 23096.380707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23554.227234, 22795.159668, 870.000000, 870.000000, 0.000000, X, Y) [Wed Jun 5 15:01:59 2013] Writing fullrun_pn_xmm0001730201_pi300-10000_pass1_cl_src28.gif [Wed Jun 5 15:21:39 2013] Mean detx,y = (-700.19, -61.69) [Wed Jun 5 15:21:42 2013] Setting backscal keywords in source and bgd. spectrum [Wed Jun 5 15:22:00 2013] Binned source spectrum to 10 counts/bin [Wed Jun 5 15:22:01 2013] Setting source spectrum file to fullrun_pn_xmm0001730201_pi300-10000_pass1_cl_src28_src_b10.pi.gz [Wed Jun 5 15:22:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0001730201_pi300-10000_pass1_cl_src28_bgd.pi.gz [Wed Jun 5 16:03:35 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed Jun 5 16:03:35 2013] rmf not generated due to insufficient counts [Wed Jun 5 17:08:41 2013] Updating aperture counts using extracted products [Wed Jun 5 17:08:41 2013] Total counts from fullrun_pn_xmm0001730201_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 928.00 [Wed Jun 5 17:08:41 2013] Total counts from fullrun_pn_xmm0001730201_pi300-10000_pass1_cl_src28_bgd.pi.gz = 485.00 [Wed Jun 5 17:08:41 2013] Got source and background scale factors 1342400.000000, 2302427.000000 [Wed Jun 5 17:08:41 2013] User source parameters: Position = (298.1, 280.8) = 17 34 38.02 -32 34 40.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 645.2 +/- 31.5 Background aperture counts = 282.8 Rate = 0.04 +/- 0.002 [Wed Jun 5 17:08:41 2013] Updating counts from extracted products [Wed Jun 5 17:08:41 2013] Set source signif. to 645.23/16.82 = 38.37 [Wed Jun 5 17:08:44 2013] Calculating source flux in energy range 0.30-8.00 [Wed Jun 5 17:08:44 2013] Using photon index=1.80, rate=0.0351, arf fullrun_pn_xmm0001730201_pi300-10000_pass1_cl_src28.arf [Wed Jun 5 17:08:44 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jun 5 17:08:44 2013] Updating source flux to 2.4e-13 [Wed Jun 5 17:09:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed Jun 5 17:09:07 2013] xmm0001730201/analysis//spectral/fullrun_pn_xmm0001730201_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete