[Wed Jun 5 08:11:09 2013] Detection parameters: Position = (276.4, 282.1) = 17 34 45.47 -32 34 28.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 111.8 +/- 16.2 Background counts = 24.3 Rate = 0.005 +/- 0.0007 [Wed Jun 5 08:11:09 2013] Off-axis axis estimate = 1.99' [Wed Jun 5 10:27:58 2013] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 10:27:58 2013] Initial guess for spatial extent in simple fitting = 7.42" [Wed Jun 5 10:27:58 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.822 [Wed Jun 5 10:27:58 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.42" [Wed Jun 5 11:40:49 2013] fullrun_mos2_xmm0001730201_pi300-10000_cl_pass0_src11.ximg exists [Wed Jun 5 11:40:49 2013] fullrun_mos2_xmm0001730201_pi300-10000_cl_pass0_src11_1.ximg exists [Wed Jun 5 11:40:49 2013] Fit fullrun_mos2_xmm0001730201_pi300-10000_cl_pass0_src11 appears to have run properly [Wed Jun 5 11:40:50 2013] fullrun_mos2_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists [Wed Jun 5 11:40:50 2013] fullrun_mos2_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists [Wed Jun 5 11:40:50 2013] Fit fullrun_mos2_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly [Wed Jun 5 11:41:10 2013] Source 24 is offset by -6.414477 and 3.888164 pixels which is larger than 2 X fitted extent = 1.083182 x 2.444975, not incorporating fit results [Wed Jun 5 11:41:10 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 11:41:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 11:41:10 2013] Assessing source extent using major [Wed Jun 5 11:41:10 2013] Source does appear to be extended [Wed Jun 5 11:41:10 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 11:41:10 2013] Source is confused with source 8 [Wed Jun 5 13:30:53 2013] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 13:30:53 2013] Initial guess for spatial extent in simple fitting = 7.42" [Wed Jun 5 13:30:53 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.822 [Wed Jun 5 13:30:53 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 7.42" [Wed Jun 5 15:01:31 2013] fullrun_mos2_xmm0001730201_pi300-10000_cl_pass1_src11.ximg exists [Wed Jun 5 15:01:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0001730201_pi300-10000_cl_pass1_src11.csv [Wed Jun 5 15:01:31 2013] fullrun_mos2_xmm0001730201_pi300-10000_cl_pass1_src11_1.ximg exists [Wed Jun 5 15:01:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0001730201_pi300-10000_cl_pass1_src11.csv [Wed Jun 5 15:01:31 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0001730201_pi300-10000_cl_pass1_src11_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0001730201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 15:01:31 2013] fullrun_mos2_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists [Wed Jun 5 15:01:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src11.csv [Wed Jun 5 15:01:31 2013] fullrun_mos2_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists [Wed Jun 5 15:01:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src11.csv [Wed Jun 5 15:01:31 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 15:01:49 2013] Source 24 is offset by -6.415511 and 3.957383 pixels which is larger than 2 X fitted extent = 0.853122 x 1.590308, not incorporating fit results [Wed Jun 5 15:01:49 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 32.582675 pixels away [Wed Jun 5 15:01:49 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 15:01:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 15:01:49 2013] Assessing source extent using major [Wed Jun 5 15:01:49 2013] Source does appear to be extended [Wed Jun 5 15:01:49 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 16:39:37 2013] XMMSAS src. selection expression = ellipse(23999.122528, 24496.380310, 652.500000, 652.500000, 0.000000, X, Y) [Wed Jun 5 16:39:37 2013] Writing source region out to fullrun_mos2_xmm0001730201_pi300-10000_pass1_cl_src24_src.reg [Wed Jun 5 16:39:37 2013] Extracting stamp from image fullrun_mos2_xmm0001730201_pi300-10000_cl_sm2.00.img.gz, (239, 245) - (314, 320) [Wed Jun 5 16:39:37 2013] XMMSAS bgd. selection expression = annulus(23999.122528, 24496.380310, 1087.500000, 2175.000000, X, Y) && !ellipse(24741.031640, 24055.371800, 433.749612, 412.530412, 17.609800, X, Y) && !ellipse(22122.638000, 25577.266000, 1245.728036, 1245.728036, 0.000000, X, Y) && !ellipse(25291.301392, 24487.475342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23366.645280, 24673.169000, 371.755211, 268.145608, 96.772730, X, Y) && !ellipse(26483.156560, 25158.713400, 999.144029, 519.564815, 312.911800, X, Y) && !ellipse(24859.569733, 25259.472900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22567.587740, 23589.796800, 334.347210, 334.347210, 0.000000, X, Y) && !ellipse(25892.269928, 24304.488068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26450.784000, 22986.911800, 557.638416, 195.897606, 56.238310, X, Y) && !ellipse(23329.649800, 23525.160000, 335.036010, 335.036010, 0.000000, X, Y) && !ellipse(25015.948303, 23120.931763, 870.000000, 870.000000, 0.000000, X, Y) [Wed Jun 5 16:39:37 2013] Writing fullrun_mos2_xmm0001730201_pi300-10000_pass1_cl_src24.gif [Wed Jun 5 16:41:59 2013] Mean detx,y = (-621.25, -213.91) [Wed Jun 5 16:42:00 2013] Setting backscal keywords in source and bgd. spectrum [Wed Jun 5 16:42:08 2013] Binned source spectrum to 10 counts/bin [Wed Jun 5 16:42:08 2013] Setting source spectrum file to fullrun_mos2_xmm0001730201_pi300-10000_pass1_cl_src24_src_b10.pi.gz [Wed Jun 5 16:42:08 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0001730201_pi300-10000_pass1_cl_src24_bgd.pi.gz [Wed Jun 5 17:06:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed Jun 5 17:06:16 2013] rmf not generated due to insufficient counts [Wed Jun 5 17:08:50 2013] Updating aperture counts using extracted products [Wed Jun 5 17:08:50 2013] Total counts from fullrun_mos2_xmm0001730201_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 1076.00 [Wed Jun 5 17:08:50 2013] Total counts from fullrun_mos2_xmm0001730201_pi300-10000_pass1_cl_src24_bgd.pi.gz = 584.00 [Wed Jun 5 17:08:50 2013] Got source and background scale factors 1150776.000000, 3796652.000000 [Wed Jun 5 17:08:50 2013] User source parameters: Position = (276.4, 282.1) = 17 34 45.47 -32 34 28.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 899.0 +/- 33.8 Background aperture counts = 177.0 Rate = 0.04 +/- 0.001 [Wed Jun 5 17:08:50 2013] Updating counts from extracted products [Wed Jun 5 17:08:50 2013] Set source signif. to 898.99/13.30 = 67.57 [Wed Jun 5 17:08:54 2013] Calculating source flux in energy range 0.30-8.00 [Wed Jun 5 17:08:54 2013] Using photon index=1.80, rate=0.0353, arf fullrun_mos2_xmm0001730201_pi300-10000_pass1_cl_src24.arf [Wed Jun 5 17:08:54 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jun 5 17:08:54 2013] Updating source flux to 6.7e-13 [Wed Jun 5 17:08:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed Jun 5 17:09:02 2013] xmm0001730201/analysis//spectral/fullrun_mos2_xmm0001730201_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete