[Wed Jun 5 08:10:50 2013] Detection parameters: Position = (279.5, 265.1) = 17 34 44.41 -32 35 46.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 59.2 +/- 13.0 Background counts = 26.1 Rate = 0.002 +/- 0.0005 [Wed Jun 5 08:10:50 2013] Off-axis axis estimate = 2.78' [Wed Jun 5 09:42:36 2013] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 09:42:36 2013] Initial guess for spatial extent in simple fitting = 7.82" [Wed Jun 5 09:42:36 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.948 [Wed Jun 5 09:42:36 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 7.82" [Wed Jun 5 10:27:57 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_src23.ximg exists [Wed Jun 5 10:27:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_src23.csv [Wed Jun 5 10:27:57 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_src23_1.ximg exists [Wed Jun 5 10:27:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_src23.csv [Wed Jun 5 10:27:57 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_src23_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 10:27:58 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists [Wed Jun 5 10:27:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src23.csv [Wed Jun 5 10:27:58 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists [Wed Jun 5 10:27:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src23.csv [Wed Jun 5 10:27:58 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 11:41:04 2013] Spatial fit model total counts = 149.468000, observed total counts = 799.000000 [Wed Jun 5 11:41:04 2013] Poor agreement between spatial fit and data for source 24 It may help to tweak spatial fit manually Not incorporating fit results [Wed Jun 5 11:41:04 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 11:41:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 11:41:04 2013] Assessing source extent using major [Wed Jun 5 11:41:04 2013] Source does appear to be extended [Wed Jun 5 11:41:04 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 12:47:30 2013] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 12:47:30 2013] Initial guess for spatial extent in simple fitting = 7.82" [Wed Jun 5 12:47:30 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.948 [Wed Jun 5 12:47:30 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 7.82" [Wed Jun 5 13:30:53 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_src23.ximg exists [Wed Jun 5 13:30:53 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_src23_1.ximg exists [Wed Jun 5 13:30:53 2013] Fit fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_src23 appears to have run properly [Wed Jun 5 13:30:53 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists [Wed Jun 5 13:30:53 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists [Wed Jun 5 13:30:53 2013] Fit fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly [Wed Jun 5 15:01:44 2013] Source 24 is offset by 7.611409 and 4.497739 pixels which is larger than 2 X fitted extent = 7.188460 x 7.188460, not incorporating fit results [Wed Jun 5 15:01:44 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 15:01:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 15:01:44 2013] Assessing source extent using major [Wed Jun 5 15:01:44 2013] Source does appear to be extended [Wed Jun 5 15:01:44 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 16:20:10 2013] XMMSAS src. selection expression = ellipse(24267.402618, 23018.065308, 652.500000, 652.500000, 0.000000, X, Y) [Wed Jun 5 16:20:10 2013] Writing source region out to fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src24_src.reg [Wed Jun 5 16:20:10 2013] Extracting stamp from image fullrun_mos1_xmm0001730201_pi300-10000_cl_sm2.00.img.gz, (242, 228) - (317, 303) [Wed Jun 5 16:20:10 2013] XMMSAS bgd. selection expression = annulus(24267.402618, 23018.065308, 1087.500000, 2175.000000, X, Y) && !ellipse(24735.462000, 24053.197600, 442.268013, 418.432812, 354.202250, X, Y) && !ellipse(23384.557587, 24721.678131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22138.646580, 25201.987400, 773.264822, 312.776009, 353.658760, X, Y) && !ellipse(26432.882600, 22988.577500, 342.641610, 342.641610, 0.000000, X, Y) && !ellipse(26542.956200, 25249.295000, 1093.304031, 527.988815, 300.798800, X, Y) && !ellipse(25876.172485, 24326.506226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24841.297821, 25249.017395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23333.145200, 23535.250000, 250.957607, 250.957607, 0.000000, X, Y) && !ellipse(22553.117720, 23564.195800, 309.541609, 309.541609, 0.000000, X, Y) [Wed Jun 5 16:20:10 2013] Writing fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src24.gif [Wed Jun 5 16:25:44 2013] Mean detx,y = (1223.45, 393.87) [Wed Jun 5 16:25:45 2013] Setting backscal keywords in source and bgd. spectrum [Wed Jun 5 16:25:55 2013] Binned source spectrum to 10 counts/bin [Wed Jun 5 16:25:55 2013] Setting source spectrum file to fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src24_src_b10.pi.gz [Wed Jun 5 16:25:55 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src24_bgd.pi.gz [Wed Jun 5 16:39:13 2013] Not generating rmf since there are only 59 counts [Wed Jun 5 16:39:13 2013] rmf not generated due to insufficient counts [Wed Jun 5 17:08:47 2013] Updating aperture counts using extracted products [Wed Jun 5 17:08:47 2013] Total counts from fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 497.00 [Wed Jun 5 17:08:47 2013] Total counts from fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src24_bgd.pi.gz = 983.00 [Wed Jun 5 17:08:47 2013] Got source and background scale factors 1282532.000000, 6744252.000000 [Wed Jun 5 17:08:47 2013] User source parameters: Position = (279.5, 265.1) = 17 34 44.41 -32 35 46.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 310.1 +/- 23.3 Background aperture counts = 186.9 Rate = 0.01 +/- 0.0009 [Wed Jun 5 17:08:47 2013] Updating counts from extracted products [Wed Jun 5 17:08:47 2013] Set source signif. to 310.07/13.67 = 22.68 [Wed Jun 5 17:08:48 2013] Calculating source flux in energy range 0.30-8.00 [Wed Jun 5 17:08:48 2013] Using photon index=1.80, rate=0.0122, arf fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src24.arf [Wed Jun 5 17:08:48 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jun 5 17:08:48 2013] Updating source flux to 2.3e-13 [Wed Jun 5 17:08:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed Jun 5 17:08:59 2013] xmm0001730201/analysis//spectral/fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete