[Wed Jun  5 08:10:49 2013] Detection parameters:
  Position = (114.7, 363.3) = 17 35 41.04 -32 28 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.5 +/- 9.2
  Background counts = 11.7
  Rate = 0.002 +/- 0.0004

[Wed Jun  5 08:10:50 2013] Off-axis axis estimate = 14.12'
[Wed Jun  5 09:42:36 2013] Using EEF radius (= 13.49 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 09:42:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun  5 09:42:36 2013] Initial guess for spatial extent in simple fitting = 13.49"
[Wed Jun  5 09:42:36 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.945
[Wed Jun  5 09:42:36 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 13.49"
[Wed Jun  5 10:27:57 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_src26.ximg exists
[Wed Jun  5 10:27:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_src26.csv
[Wed Jun  5 10:27:57 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_src26_1.ximg exists
[Wed Jun  5 10:27:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_src26.csv
[Wed Jun  5 10:27:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 10:27:58 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Wed Jun  5 10:27:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Wed Jun  5 10:27:58 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Wed Jun  5 10:27:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Wed Jun  5 10:27:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 11:41:04 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 14.182428 pixels away
[Wed Jun  5 11:41:04 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 11:41:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 11:41:04 2013] Assessing source extent using major
[Wed Jun  5 11:41:04 2013] Source does appear to be extended
[Wed Jun  5 11:41:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 12:47:30 2013] Using EEF radius (= 13.49 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 12:47:30 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun  5 12:47:30 2013] Initial guess for spatial extent in simple fitting = 13.49"
[Wed Jun  5 12:47:30 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.945
[Wed Jun  5 12:47:30 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 13.49"
[Wed Jun  5 13:30:53 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_src25.ximg exists
[Wed Jun  5 13:30:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_src25.csv
[Wed Jun  5 13:30:53 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_src25_1.ximg exists
[Wed Jun  5 13:30:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_src25.csv
[Wed Jun  5 13:30:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 13:30:53 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Wed Jun  5 13:30:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src25.csv
[Wed Jun  5 13:30:53 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Wed Jun  5 13:30:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src25.csv
[Wed Jun  5 13:30:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 15:01:44 2013] Spatial fit model total counts = 192.692000, observed total counts = 160.000000
[Wed Jun  5 15:01:44 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun  5 15:01:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 15:01:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 15:01:44 2013] Assessing source extent using major
[Wed Jun  5 15:01:44 2013] Source does appear to be extended
[Wed Jun  5 15:01:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 16:20:10 2013] XMMSAS src. selection expression = ellipse(9933.166939, 31559.395447, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun  5 16:20:10 2013] Writing source region out to fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src17_src.reg
[Wed Jun  5 16:20:10 2013] Extracting stamp from image fullrun_mos1_xmm0001730201_pi300-10000_cl_sm2.00.img.gz, (77, 326) - (152, 401)
[Wed Jun  5 16:20:10 2013] XMMSAS bgd. selection expression = annulus(9933.166939, 31559.395447, 1087.500000, 2175.000000, X, Y)
[Wed Jun  5 16:20:10 2013] Writing fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src17.gif
[Wed Jun  5 16:26:27 2013] Mean detx,y = (-8038.34, 14196.28) 
[Wed Jun  5 16:26:28 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  5 16:26:47 2013] Binned source spectrum to 10 counts/bin
[Wed Jun  5 16:26:47 2013] Setting source spectrum file to fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jun  5 16:26:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Jun  5 16:39:26 2013] Not generating rmf since there are only 39 counts
[Wed Jun  5 16:39:26 2013] rmf not generated due to insufficient counts
[Wed Jun  5 17:08:47 2013] Updating aperture counts using extracted products
[Wed Jun  5 17:08:47 2013] Total counts from fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 103.00
[Wed Jun  5 17:08:47 2013] Total counts from fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src17_bgd.pi.gz = 367.00
[Wed Jun  5 17:08:47 2013] Got source and background scale factors 1240474.000000, 5949976.000000
[Wed Jun  5 17:08:47 2013] User source parameters:
  Position = (114.7, 363.3) = 17 35 41.04 -32 28 40.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 26.5 +/- 11.2
  Background aperture counts = 76.5
  Rate = 0.001 +/- 0.0004

[Wed Jun  5 17:08:47 2013] Updating counts from extracted products
[Wed Jun  5 17:08:47 2013] Set source signif. to 26.49/8.75 = 3.03
[Wed Jun  5 17:08:48 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun  5 17:08:48 2013] Using photon index=1.80, rate=0.00104, arf fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src17.arf
[Wed Jun  5 17:08:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  5 17:08:48 2013] Updating source flux to 4.9e-14
[Wed Jun  5 17:08:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun  5 17:08:59 2013] xmm0001730201/analysis//spectral/fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete