[Wed Jun  5 08:10:49 2013] Detection parameters:
  Position = (332.4, 234.7) = 17 34 26.20 -32 37 59.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.1 +/- 12.8
  Background counts = 16.6
  Rate = 0.005 +/- 0.0007

[Wed Jun  5 08:10:50 2013] Off-axis axis estimate = 5.23'
[Wed Jun  5 09:42:36 2013] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 09:42:36 2013] Initial guess for spatial extent in simple fitting = 9.05"
[Wed Jun  5 09:42:36 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.939
[Wed Jun  5 09:42:36 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 9.05"
[Wed Jun  5 10:27:57 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_src10.ximg exists
[Wed Jun  5 10:27:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_src10.csv
[Wed Jun  5 10:27:57 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Jun  5 10:27:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_src10.csv
[Wed Jun  5 10:27:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 10:27:58 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Jun  5 10:27:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed Jun  5 10:27:58 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Jun  5 10:27:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed Jun  5 10:27:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0001730201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 11:41:04 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 11.701079 pixels away
[Wed Jun  5 11:41:04 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 11:41:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 11:41:04 2013] Assessing source extent using major
[Wed Jun  5 11:41:04 2013] Source does appear to be extended
[Wed Jun  5 11:41:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 12:47:30 2013] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 12:47:30 2013] Initial guess for spatial extent in simple fitting = 9.05"
[Wed Jun  5 12:47:30 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.939
[Wed Jun  5 12:47:30 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 9.05"
[Wed Jun  5 13:30:52 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_src10.ximg exists
[Wed Jun  5 13:30:52 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Jun  5 13:30:52 2013] Fit fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_src10 appears to have run properly
[Wed Jun  5 13:30:53 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Jun  5 13:30:53 2013] fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Jun  5 13:30:53 2013] Fit fullrun_mos1_xmm0001730201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Jun  5 15:01:44 2013] Spatial fit model total counts = 233.882000, observed total counts = 218.000000
[Wed Jun  5 15:01:44 2013] Offset between fit and detection position for source 11 = 0.152056 pixels
[Wed Jun  5 15:01:44 2013] 234.368000 total counts/ 174.032000 bgd. counts: snr = 4.573640
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.152056 pixels
  Position = (332.4, 234.6) = 17 34 26.20 -32 37 59.7
  Extent = 4.6 (3.7-5.9)", rotation angle = 0
  Source counts = 60.3 +/- 15.3
  Background counts = 174.0
  Rate = 0.002 +/- 0.0006
[Wed Jun  5 15:01:44 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 15:01:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 15:01:44 2013] Assessing source extent using major axis lower bound
[Wed Jun  5 15:01:44 2013] Source does appear to be extended
[Wed Jun  5 15:01:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 16:20:09 2013] XMMSAS src. selection expression = ellipse(28868.209800, 20359.820600, 278.006529, 278.006529, 0.000000, X, Y)
[Wed Jun  5 16:20:09 2013] Writing source region out to fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src11_src.reg
[Wed Jun  5 16:20:09 2013] Extracting stamp from image fullrun_mos1_xmm0001730201_pi300-10000_cl_sm2.00.img.gz, (316, 219) - (348, 251)
[Wed Jun  5 16:20:09 2013] XMMSAS bgd. selection expression = annulus(28868.209800, 20359.820600, 463.344215, 926.688429, X, Y)
[Wed Jun  5 16:20:09 2013] Writing fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src11.gif
[Wed Jun  5 16:22:41 2013] Mean detx,y = (4332.54, -3951.57) 
[Wed Jun  5 16:22:42 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  5 16:22:51 2013] Binned source spectrum to 10 counts/bin
[Wed Jun  5 16:22:51 2013] Setting source spectrum file to fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Jun  5 16:22:51 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Jun  5 16:38:09 2013] Not generating rmf since there are only 60 counts
[Wed Jun  5 16:38:09 2013] rmf not generated due to insufficient counts
[Wed Jun  5 17:08:45 2013] Updating aperture counts using extracted products
[Wed Jun  5 17:08:45 2013] Total counts from fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 82.00
[Wed Jun  5 17:08:45 2013] Total counts from fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 153.00
[Wed Jun  5 17:08:45 2013] Got source and background scale factors 243200.000000, 1888036.000000
[Wed Jun  5 17:08:45 2013] User source parameters:
  Position = (332.4, 234.6) = 17 34 26.20 -32 37 59.7
  Extent = 4.6 (3.7-5.9)", rotation angle = 0
  Source aperture counts = 62.3 +/- 10.1
  Background aperture counts = 19.7
  Rate = 0.002 +/- 0.0004

[Wed Jun  5 17:08:48 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun  5 17:08:48 2013] Using photon index=1.80, rate=0.00237, arf fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src11.arf
[Wed Jun  5 17:08:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  5 17:08:48 2013] Updating source flux to 7.3e-14
[Wed Jun  5 17:08:56 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun  5 17:08:59 2013] xmm0001730201/analysis//spectral/fullrun_mos1_xmm0001730201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete