[Sun May 19 13:49:00 2013] Detection parameters:
  Position = (215.4, 223.0) = 4 20 18.38 55 55 53.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.2 +/- 17.1
  Background counts = 68.8
  Rate = 0.005 +/- 0.0008

[Sun May 19 13:49:00 2013] Off-axis axis estimate = 8.13'
[Sun May 19 14:00:35 2013] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Sun May 19 14:00:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 19 14:00:35 2013] Initial guess for spatial extent in simple fitting = 10.50"
[Sun May 19 14:00:35 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.884
[Sun May 19 14:00:35 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 10.50"
[Sun May 19 14:08:19 2013] fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_src2.ximg exists
[Sun May 19 14:08:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_src2.csv
[Sun May 19 14:08:19 2013] fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun May 19 14:08:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_src2.csv
[Sun May 19 14:08:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:08:19 2013] fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun May 19 14:08:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May 19 14:08:19 2013] fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun May 19 14:08:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May 19 14:08:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:08:23 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.697243 pixels away
[Sun May 19 14:08:23 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:08:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:08:23 2013] Assessing source extent using major
[Sun May 19 14:08:23 2013] Source does appear to be extended
[Sun May 19 14:08:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:18:31 2013] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Sun May 19 14:18:31 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 19 14:18:31 2013] Initial guess for spatial extent in simple fitting = 10.50"
[Sun May 19 14:18:31 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.884
[Sun May 19 14:18:31 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 10.50"
[Sun May 19 14:26:02 2013] fullrun_mos2_xmm0000110101_pi300-10000_cl_pass1_src2.ximg exists
[Sun May 19 14:26:02 2013] fullrun_mos2_xmm0000110101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun May 19 14:26:02 2013] Fit fullrun_mos2_xmm0000110101_pi300-10000_cl_pass1_src2 appears to have run properly
[Sun May 19 14:26:03 2013] fullrun_mos2_xmm0000110101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun May 19 14:26:03 2013] fullrun_mos2_xmm0000110101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun May 19 14:26:03 2013] Fit fullrun_mos2_xmm0000110101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun May 19 14:26:06 2013] Spatial fit model total counts = 297.650000, observed total counts = 270.000000
[Sun May 19 14:26:06 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 14:26:06 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:26:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:26:06 2013] Assessing source extent using major
[Sun May 19 14:26:06 2013] Source does appear to be extended
[Sun May 19 14:26:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:34:04 2013] XMMSAS src. selection expression = ellipse(18694.517365, 19349.214401, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 14:34:04 2013] Writing source region out to fullrun_mos2_xmm0000110101_pi300-10000_pass1_cl_src6_src.reg
[Sun May 19 14:34:04 2013] Extracting stamp from image fullrun_mos2_xmm0000110101_pi300-10000_cl_sm2.00.img.gz, (178, 185) - (253, 260)
[Sun May 19 14:34:04 2013] XMMSAS bgd. selection expression = annulus(18694.517365, 19349.214401, 1087.500000, 2175.000000, X, Y)
[Sun May 19 14:34:04 2013] Writing fullrun_mos2_xmm0000110101_pi300-10000_pass1_cl_src6.gif
[Sun May 19 14:34:20 2013] Mean detx,y = (-5929.29, 5002.24) 
[Sun May 19 14:34:21 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 14:34:48 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 14:34:49 2013] Setting source spectrum file to fullrun_mos2_xmm0000110101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun May 19 14:34:49 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0000110101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun May 19 14:36:34 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 19 14:36:34 2013] rmf not generated due to insufficient counts
[Sun May 19 14:37:52 2013] Updating aperture counts using extracted products
[Sun May 19 14:37:52 2013] Total counts from fullrun_mos2_xmm0000110101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 221.00
[Sun May 19 14:37:52 2013] Total counts from fullrun_mos2_xmm0000110101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 1082.00
[Sun May 19 14:37:52 2013] Got source and background scale factors 1260144.000000, 10164802.000000
[Sun May 19 14:37:52 2013] User source parameters:
  Position = (215.4, 223.0) = 4 20 18.38 55 55 53.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 86.9 +/- 15.9
  Background aperture counts = 134.1
  Rate = 0.004 +/- 0.0006

[Sun May 19 14:37:52 2013] Updating counts from extracted products
[Sun May 19 14:37:52 2013] Set source signif. to 86.86/11.58 = 7.50
[Sun May 19 14:37:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 14:37:53 2013] Using photon index=1.80, rate=0.00353, arf fullrun_mos2_xmm0000110101_pi300-10000_pass1_cl_src6.arf
[Sun May 19 14:37:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 14:37:53 2013] Updating source flux to 7.2e-14
[Sun May 19 14:37:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 14:37:57 2013] xmm0000110101/analysis//spectral/fullrun_mos2_xmm0000110101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete