[Sun May 19 13:49:00 2013] Detection parameters:
  Position = (285.6, 279.3) = 4 19 42.07 55 59 58.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 171.0 +/- 19.7
  Background counts = 75.9
  Rate = 0.005 +/- 0.0006

[Sun May 19 13:49:00 2013] Off-axis axis estimate = 1.67'
[Sun May 19 14:00:35 2013] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sun May 19 14:00:35 2013] Initial guess for spatial extent in simple fitting = 7.26"
[Sun May 19 14:00:35 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.062
[Sun May 19 14:00:35 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Sun May 19 14:08:19 2013] fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 19 14:08:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_src1.csv
[Sun May 19 14:08:19 2013] fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 19 14:08:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_src1.csv
[Sun May 19 14:08:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:08:19 2013] fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 19 14:08:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 19 14:08:19 2013] fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 19 14:08:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 19 14:08:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0000110101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:08:23 2013] Source 3 is offset by 6.899195 and -0.238034 pixels which is larger than
2 X fitted extent = 0.835048 x 0.835048, not incorporating fit results
[Sun May 19 14:08:23 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:08:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:08:23 2013] Assessing source extent using major
[Sun May 19 14:08:23 2013] Source does appear to be extended
[Sun May 19 14:08:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:18:31 2013] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sun May 19 14:18:31 2013] Initial guess for spatial extent in simple fitting = 7.26"
[Sun May 19 14:18:31 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.062
[Sun May 19 14:18:31 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.26"
[Sun May 19 14:26:02 2013] fullrun_mos2_xmm0000110101_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 19 14:26:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0000110101_pi300-10000_cl_pass1_src1.csv
[Sun May 19 14:26:02 2013] fullrun_mos2_xmm0000110101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 19 14:26:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0000110101_pi300-10000_cl_pass1_src1.csv
[Sun May 19 14:26:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0000110101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0000110101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:26:03 2013] fullrun_mos2_xmm0000110101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 19 14:26:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0000110101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 19 14:26:03 2013] fullrun_mos2_xmm0000110101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 19 14:26:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0000110101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 19 14:26:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0000110101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0000110101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:26:06 2013] Source 3 is offset by 7.197195 and -0.238275 pixels which is larger than
2 X fitted extent = 0.912380 x 0.912380, not incorporating fit results
[Sun May 19 14:26:06 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:26:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:26:06 2013] Assessing source extent using major
[Sun May 19 14:26:06 2013] Source does appear to be extended
[Sun May 19 14:26:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:34:04 2013] XMMSAS src. selection expression = ellipse(24798.381927, 24247.864258, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 14:34:04 2013] Writing source region out to fullrun_mos2_xmm0000110101_pi300-10000_pass1_cl_src3_src.reg
[Sun May 19 14:34:04 2013] Extracting stamp from image fullrun_mos2_xmm0000110101_pi300-10000_cl_sm2.00.img.gz, (248, 242) - (323, 317)
[Sun May 19 14:34:04 2013] XMMSAS bgd. selection expression = annulus(24798.381927, 24247.864258, 1087.500000, 2175.000000, X, Y)
[Sun May 19 14:34:04 2013] Writing fullrun_mos2_xmm0000110101_pi300-10000_pass1_cl_src3.gif
[Sun May 19 14:34:06 2013] Mean detx,y = (73.87, 53.24) 
[Sun May 19 14:34:07 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 14:34:16 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 14:34:16 2013] Setting source spectrum file to fullrun_mos2_xmm0000110101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 19 14:34:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0000110101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May 19 14:36:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 19 14:36:28 2013] rmf not generated due to insufficient counts
[Sun May 19 14:37:52 2013] Updating aperture counts using extracted products
[Sun May 19 14:37:52 2013] Total counts from fullrun_mos2_xmm0000110101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 237.00
[Sun May 19 14:37:52 2013] Total counts from fullrun_mos2_xmm0000110101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1283.00
[Sun May 19 14:37:52 2013] Got source and background scale factors 1301260.000000, 10681364.000000
[Sun May 19 14:37:52 2013] User source parameters:
  Position = (285.6, 279.3) = 4 19 42.07 55 59 58.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 80.7 +/- 16.4
  Background aperture counts = 156.3
  Rate = 0.003 +/- 0.0007

[Sun May 19 14:37:52 2013] Updating counts from extracted products
[Sun May 19 14:37:52 2013] Set source signif. to 80.70/12.50 = 6.45
[Sun May 19 14:37:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 14:37:53 2013] Using photon index=1.80, rate=0.00328, arf fullrun_mos2_xmm0000110101_pi300-10000_pass1_cl_src3.arf
[Sun May 19 14:37:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 14:37:53 2013] Updating source flux to 4.7e-14
[Sun May 19 14:37:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 14:37:57 2013] xmm0000110101/analysis//spectral/fullrun_mos2_xmm0000110101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete