[Sun May 19 13:48:47 2013] Detection parameters:
  Position = (200.1, 275.9) = 4 20 26.38 55 59 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.4 +/- 14.4
  Background counts = 72.4
  Rate = 0.003 +/- 0.0006

[Sun May 19 13:48:47 2013] Off-axis axis estimate = 7.31'
[Sun May 19 13:54:17 2013] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Sun May 19 13:54:17 2013] Initial guess for spatial extent in simple fitting = 10.08"
[Sun May 19 13:54:17 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.133
[Sun May 19 13:54:17 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.08"
[Sun May 19 14:00:35 2013] fullrun_mos1_xmm0000110101_pi300-10000_cl_pass0_src3.ximg exists
[Sun May 19 14:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0000110101_pi300-10000_cl_pass0_src3.csv
[Sun May 19 14:00:35 2013] fullrun_mos1_xmm0000110101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May 19 14:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0000110101_pi300-10000_cl_pass0_src3.csv
[Sun May 19 14:00:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0000110101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0000110101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:00:35 2013] fullrun_mos1_xmm0000110101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May 19 14:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0000110101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 19 14:00:35 2013] fullrun_mos1_xmm0000110101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May 19 14:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0000110101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 19 14:00:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0000110101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0000110101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:08:22 2013] Spatial fit model total counts = 198.081000, observed total counts = 179.000000
[Sun May 19 14:08:22 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 14:08:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:08:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:08:22 2013] Assessing source extent using major
[Sun May 19 14:08:22 2013] Source does appear to be extended
[Sun May 19 14:08:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:12:16 2013] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Sun May 19 14:12:16 2013] Initial guess for spatial extent in simple fitting = 10.08"
[Sun May 19 14:12:16 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.133
[Sun May 19 14:12:16 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.08"
[Sun May 19 14:18:30 2013] fullrun_mos1_xmm0000110101_pi300-10000_cl_pass1_src3.ximg exists
[Sun May 19 14:18:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0000110101_pi300-10000_cl_pass1_src3.csv
[Sun May 19 14:18:30 2013] fullrun_mos1_xmm0000110101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May 19 14:18:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0000110101_pi300-10000_cl_pass1_src3.csv
[Sun May 19 14:18:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0000110101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0000110101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:18:31 2013] fullrun_mos1_xmm0000110101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May 19 14:18:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0000110101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May 19 14:18:31 2013] fullrun_mos1_xmm0000110101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May 19 14:18:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0000110101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May 19 14:18:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0000110101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0000110101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:26:05 2013] Spatial fit model total counts = 198.158000, observed total counts = 179.000000
[Sun May 19 14:26:05 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 14:26:05 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:26:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:26:05 2013] Assessing source extent using major
[Sun May 19 14:26:05 2013] Source does appear to be extended
[Sun May 19 14:26:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:31:48 2013] XMMSAS src. selection expression = ellipse(17363.474182, 23958.312073, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 14:31:48 2013] Writing source region out to fullrun_mos1_xmm0000110101_pi300-10000_pass1_cl_src2_src.reg
[Sun May 19 14:31:48 2013] Extracting stamp from image fullrun_mos1_xmm0000110101_pi300-10000_cl_sm2.00.img.gz, (163, 238) - (238, 313)
[Sun May 19 14:31:48 2013] XMMSAS bgd. selection expression = annulus(17363.474182, 23958.312073, 1087.500000, 2175.000000, X, Y)
[Sun May 19 14:31:48 2013] Writing fullrun_mos1_xmm0000110101_pi300-10000_pass1_cl_src2.gif
[Sun May 19 14:32:31 2013] Mean detx,y = (597.36, 7147.69) 
[Sun May 19 14:32:32 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 14:33:02 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 14:33:02 2013] Setting source spectrum file to fullrun_mos1_xmm0000110101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May 19 14:33:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0000110101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun May 19 14:33:43 2013] Not generating rmf since there are only 77 counts
[Sun May 19 14:33:43 2013] rmf not generated due to insufficient counts
[Sun May 19 14:37:52 2013] Updating aperture counts using extracted products
[Sun May 19 14:37:52 2013] Total counts from fullrun_mos1_xmm0000110101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 131.00
[Sun May 19 14:37:52 2013] Total counts from fullrun_mos1_xmm0000110101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1086.00
[Sun May 19 14:37:52 2013] Got source and background scale factors 1128004.000000, 9770464.000000
[Sun May 19 14:37:52 2013] User source parameters:
  Position = (200.1, 275.9) = 4 20 26.38 55 59 44.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 5.6 +/- 12.5
  Background aperture counts = 125.4
  Rate = 0.0002 +/- 0.0005

[Sun May 19 14:37:52 2013] Updating counts from extracted products
[Sun May 19 14:37:52 2013] Set source signif. to 5.62/11.20 = 0.50
[Sun May 19 14:37:52 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 14:37:52 2013] Using photon index=1.80, rate=0.000239, arf fullrun_mos1_xmm0000110101_pi300-10000_pass1_cl_src2.arf
[Sun May 19 14:37:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 14:37:52 2013] Updating source flux to 4.1e-15
[Sun May 19 14:37:55 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 14:37:56 2013] xmm0000110101/analysis//spectral/fullrun_mos1_xmm0000110101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete