[Fri Sep 23 03:51:18 2011] Detection parameters:
  Position = (417.8, 403.1) = 22 56 12.99 62 41 38.4
  Extent = 0.7" x 0.5", rotation angle = 164 degrees
  Source counts = 35.7 +/- 6.1
  Background counts = 1.3
  Rate = 0.001 +/- 0.0002

[Fri Sep 23 03:51:21 2011] Off-axis axis estimate = 4.07'
[Fri Sep 23 03:53:37 2011] Using EEF radius (= 0.85 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 03:53:37 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Fri Sep 23 03:53:37 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.803
[Fri Sep 23 03:53:37 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 0.85"
[Fri Sep 23 03:53:39 2011] fullrun_ccd2_acisf09920_pi14-548_cl_pass0_src23.ximg exists
[Fri Sep 23 03:53:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09920_pi14-548_cl_pass0_src23.csv
[Fri Sep 23 03:53:39 2011] fullrun_ccd2_acisf09920_pi14-548_cl_pass0_src23_1.ximg exists
[Fri Sep 23 03:53:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09920_pi14-548_cl_pass0_src23.csv
[Fri Sep 23 03:53:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09920_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09920_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 03:53:41 2011] fullrun_ccd2_acisf09920_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Fri Sep 23 03:53:41 2011] fullrun_ccd2_acisf09920_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Sep 23 03:53:41 2011] Fit fullrun_ccd2_acisf09920_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Sep 23 03:54:28 2011] Spatial fit model total counts = 42.011400, observed total counts = 42.000000
[Fri Sep 23 03:54:28 2011] Offset between fit and detection position for source 5 = 0.743970 pixels
[Fri Sep 23 03:54:28 2011] 41.649800 total counts/ 11.308400 bgd. counts: snr = 9.022669
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.743970 pixels
  Position = (418.4, 403.5) = 22 56 12.98 62 41 38.4
  Extent = 0.7 (0.5-1.1)", rotation angle = 0
  Source counts = 30.3 +/- 6.5
  Background counts = 11.3
  Rate = 0.001 +/- 0.0002
[Fri Sep 23 03:54:28 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 03:54:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 03:54:28 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 03:54:28 2011] Source does appear to be extended
[Fri Sep 23 03:54:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 03:55:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 03:55:29 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Fri Sep 23 03:55:29 2011] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.623
[Fri Sep 23 03:55:29 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 0.69"
[Fri Sep 23 03:55:31 2011] fullrun_ccd2_acisf09920_pi14-548_cl_pass1_src23.ximg exists
[Fri Sep 23 03:55:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09920_pi14-548_cl_pass1_src23.csv
[Fri Sep 23 03:55:31 2011] fullrun_ccd2_acisf09920_pi14-548_cl_pass1_src23_1.ximg exists
[Fri Sep 23 03:55:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09920_pi14-548_cl_pass1_src23.csv
[Fri Sep 23 03:55:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09920_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09920_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 03:55:34 2011] fullrun_ccd2_acisf09920_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Fri Sep 23 03:55:34 2011] fullrun_ccd2_acisf09920_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Sep 23 03:55:34 2011] Fit fullrun_ccd2_acisf09920_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Sep 23 03:56:16 2011] Spatial fit model total counts = 41.578400, observed total counts = 42.000000
[Fri Sep 23 03:56:16 2011] Offset between fit and detection position for source 5 = 0.257449 pixels
[Fri Sep 23 03:56:16 2011] 40.944000 total counts/ 12.756000 bgd. counts: snr = 7.892362
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.257449 pixels
  Position = (418.7, 403.5) = 22 56 12.96 62 41 38.4
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 28.2 +/- 6.4
  Background counts = 12.8
  Rate = 0.001 +/- 0.0002
[Fri Sep 23 03:56:16 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 03:56:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 03:56:16 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 03:56:16 2011] Source does appear to be extended
[Fri Sep 23 03:56:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 04:05:21 2011] Not overwriting source region fullrun_ccd2_acisf09920_pi14-548_pass1_cl_src5_src.reg
[Fri Sep 23 04:05:21 2011] Extracting stamp from image fullrun_ccd2_acisf09920_pi14-548_cl_sm2.00.img.gz, (390, 375) - (448, 432)
[Fri Sep 23 04:05:21 2011] Writing fullrun_ccd2_acisf09920_pi14-548_pass1_cl_src5.gif
[Fri Sep 23 04:07:03 2011] ../../acisf09920/products/events/fullrun_ccd2_acisf09920_pi14-548_pass1_cl_src5_src.evt and ../../acisf09920/products/events/fullrun_ccd2_acisf09920_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri Sep 23 04:07:03 2011] Size of ../../acisf09920/products/events/fullrun_ccd2_acisf09920_pi14-548_pass1_cl_src5_src.evt.gz[events] = 35 counts
[Fri Sep 23 04:07:03 2011] Mean chipx,y = (80.54, 543.20)
[Fri Sep 23 04:07:03 2011] Mean tdetx,y = (3604.20, 4005.46)
[Fri Sep 23 04:07:03 2011] chipx,y range = (62.00-97.00, 526.00-563.00)
[Fri Sep 23 04:07:03 2011] Size of ../../acisf09920/products/events/fullrun_ccd2_acisf09920_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 9 counts
[Fri Sep 23 04:07:03 2011] ../../acisf09920/products/images/fullrun_ccd2_acisf09920_pi14-548_pass1_cl_src5_src.img and ../../acisf09920/products/images/fullrun_ccd2_acisf09920_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri Sep 23 04:07:03 2011] ../../acisf09920/products/spectra/fullrun_ccd2_acisf09920_pi14-548_pass1_cl_src5_src.pi and ../../acisf09920/products/spectra/fullrun_ccd2_acisf09920_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Fri Sep 23 04:07:03 2011] Not generating rmf since there are only 28 counts
[Fri Sep 23 04:07:07 2011] ../../acisf09920/products/lightcurves/fullrun_ccd2_acisf09920_pi14-548_pass1_cl_src5_src.lc and ../../acisf09920/products/lightcurves/fullrun_ccd2_acisf09920_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Fri Sep 23 04:11:09 2011] 189.687
[Fri Sep 23 04:15:22 2011] Updating aperture counts using extracted products
[Fri Sep 23 04:15:22 2011] Error reading totcts from fullrun_ccd2_acisf09920_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Sep 23 04:15:23 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 04:15:23 2011] Using photon index=1.80, rate=0.00102, arf fullrun_ccd2_acisf09920_pi14-548_pass1_cl_src5.arf
[Fri Sep 23 04:15:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 04:15:23 2011] Updating source flux to 1.5e-14
[Fri Sep 23 04:16:29 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting