[Wed Sep 28 08:03:19 2011] Detection parameters:
  Position = (341.3, 648.7) = 22 53 12.97 62 33 24.5
  Extent = 0.5" x 0.5", rotation angle = 35 degrees
  Source counts = 41.1 +/- 6.5
  Background counts = 0.9
  Rate = 0.002 +/- 0.0003

[Wed Sep 28 08:03:22 2011] Off-axis axis estimate = 3.43'
[Wed Sep 28 08:04:29 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 08:04:29 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Wed Sep 28 08:04:29 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.143
[Wed Sep 28 08:04:29 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 0.67"
[Wed Sep 28 08:04:30 2011] fullrun_ccd3_acisf09919_pi14-548_cl_pass0_src8.ximg exists
[Wed Sep 28 08:04:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09919_pi14-548_cl_pass0_src8.csv
[Wed Sep 28 08:04:30 2011] fullrun_ccd3_acisf09919_pi14-548_cl_pass0_src8_1.ximg exists
[Wed Sep 28 08:04:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09919_pi14-548_cl_pass0_src8.csv
[Wed Sep 28 08:04:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09919_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09919_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 08:04:30 2011] fullrun_ccd3_acisf09919_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Wed Sep 28 08:04:30 2011] fullrun_ccd3_acisf09919_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Sep 28 08:04:30 2011] Fit fullrun_ccd3_acisf09919_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Wed Sep 28 08:04:50 2011] Spatial fit model total counts = 43.999800, observed total counts = 44.000000
[Wed Sep 28 08:04:50 2011] Offset between fit and detection position for source 3 = 0.708872 pixels
[Wed Sep 28 08:04:50 2011] 43.942010 total counts/ 5.871910 bgd. counts: snr = 15.710656
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.708872 pixels
  Position = (341.8, 649.2) = 22 53 12.97 62 33 24.5
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 38.1 +/- 6.6
  Background counts = 5.9
  Rate = 0.002 +/- 0.0003
[Wed Sep 28 08:04:50 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 08:04:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 08:04:50 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 08:04:50 2011] Source does appear to be extended
[Wed Sep 28 08:04:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 08:05:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 08:05:25 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Wed Sep 28 08:05:25 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.304
[Wed Sep 28 08:05:25 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.62"
[Wed Sep 28 08:05:26 2011] fullrun_ccd3_acisf09919_pi14-548_cl_pass1_src8.ximg exists
[Wed Sep 28 08:05:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09919_pi14-548_cl_pass1_src8.csv
[Wed Sep 28 08:05:26 2011] fullrun_ccd3_acisf09919_pi14-548_cl_pass1_src8_1.ximg exists
[Wed Sep 28 08:05:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09919_pi14-548_cl_pass1_src8.csv
[Wed Sep 28 08:05:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09919_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09919_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 08:05:26 2011] fullrun_ccd3_acisf09919_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Wed Sep 28 08:05:26 2011] fullrun_ccd3_acisf09919_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Sep 28 08:05:26 2011] Fit fullrun_ccd3_acisf09919_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Wed Sep 28 08:05:48 2011] Spatial fit model total counts = 45.074100, observed total counts = 45.000000
[Wed Sep 28 08:05:48 2011] Offset between fit and detection position for source 3 = 0.036823 pixels
[Wed Sep 28 08:05:48 2011] 44.971110 total counts/ 7.335110 bgd. counts: snr = 13.896331
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.036823 pixels
  Position = (341.8, 649.3) = 22 53 12.97 62 33 24.5
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 37.6 +/- 6.7
  Background counts = 7.3
  Rate = 0.002 +/- 0.0003
[Wed Sep 28 08:05:48 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 08:05:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 08:05:48 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 08:05:48 2011] Source does appear to be extended
[Wed Sep 28 08:05:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 08:13:51 2011] Not overwriting source region fullrun_ccd3_acisf09919_pi14-548_pass1_cl_src3_src.reg
[Wed Sep 28 08:13:51 2011] Extracting stamp from image fullrun_ccd3_acisf09919_pi14-548_cl_sm2.00.img.gz, (314, 621) - (370, 677)
[Wed Sep 28 08:13:51 2011] Writing fullrun_ccd3_acisf09919_pi14-548_pass1_cl_src3.gif
[Wed Sep 28 08:14:22 2011] ../../acisf09919/products/events/fullrun_ccd3_acisf09919_pi14-548_pass1_cl_src3_src.evt and ../../acisf09919/products/events/fullrun_ccd3_acisf09919_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Sep 28 08:14:22 2011] Size of ../../acisf09919/products/events/fullrun_ccd3_acisf09919_pi14-548_pass1_cl_src3_src.evt.gz[events] = 40 counts
[Wed Sep 28 08:14:22 2011] Mean chipx,y = (819.48, 627.48)
[Wed Sep 28 08:14:22 2011] Mean tdetx,y = (4504.52, 3880.47)
[Wed Sep 28 08:14:22 2011] chipx,y range = (801.00-836.00, 612.00-644.00)
[Wed Sep 28 08:14:22 2011] Size of ../../acisf09919/products/events/fullrun_ccd3_acisf09919_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 5 counts
[Wed Sep 28 08:14:22 2011] ../../acisf09919/products/images/fullrun_ccd3_acisf09919_pi14-548_pass1_cl_src3_src.img and ../../acisf09919/products/images/fullrun_ccd3_acisf09919_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Sep 28 08:14:22 2011] ../../acisf09919/products/spectra/fullrun_ccd3_acisf09919_pi14-548_pass1_cl_src3_src.pi and ../../acisf09919/products/spectra/fullrun_ccd3_acisf09919_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Sep 28 08:14:22 2011] Not generating rmf since there are only 37 counts
[Wed Sep 28 08:14:25 2011] ../../acisf09919/products/lightcurves/fullrun_ccd3_acisf09919_pi14-548_pass1_cl_src3_src.lc and ../../acisf09919/products/lightcurves/fullrun_ccd3_acisf09919_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Sep 28 08:16:30 2011] 195.462
[Wed Sep 28 08:16:59 2011] Updating aperture counts using extracted products
[Wed Sep 28 08:16:59 2011] Error reading totcts from fullrun_ccd3_acisf09919_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Sep 28 08:17:00 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 08:17:00 2011] Using photon index=1.80, rate=0.00168, arf fullrun_ccd3_acisf09919_pi14-548_pass1_cl_src3.arf
[Wed Sep 28 08:17:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 08:17:00 2011] Updating source flux to 2.4e-14
[Wed Sep 28 08:17:44 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting