[Wed Sep 28 08:03:16 2011] Detection parameters:
  Position = (798.2, 324.0) = 22 53 7.20 62 38 45.4
  Extent = 0.7" x 0.5", rotation angle = 117 degrees
  Source counts = 11.6 +/- 3.5
  Background counts = 0.4
  Rate = 0.0005 +/- 0.0002

[Wed Sep 28 08:03:19 2011] Off-axis axis estimate = 3.93'
[Wed Sep 28 08:04:28 2011] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 08:04:28 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Wed Sep 28 08:04:28 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.868
[Wed Sep 28 08:04:28 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.81"
[Wed Sep 28 08:04:29 2011] fullrun_ccd2_acisf09919_pi14-548_cl_pass0_src18.ximg exists
[Wed Sep 28 08:04:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09919_pi14-548_cl_pass0_src18.csv
[Wed Sep 28 08:04:29 2011] fullrun_ccd2_acisf09919_pi14-548_cl_pass0_src18_1.ximg exists
[Wed Sep 28 08:04:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09919_pi14-548_cl_pass0_src18.csv
[Wed Sep 28 08:04:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09919_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09919_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 08:04:29 2011] fullrun_ccd2_acisf09919_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Wed Sep 28 08:04:29 2011] fullrun_ccd2_acisf09919_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Sep 28 08:04:29 2011] Fit fullrun_ccd2_acisf09919_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Sep 28 08:04:47 2011] Spatial fit model total counts = 15.822300, observed total counts = 16.000000
[Wed Sep 28 08:04:47 2011] Offset between fit and detection position for source 21 = 0.970361 pixels
[Wed Sep 28 08:04:47 2011] 16.418980 total counts/ 6.308680 bgd. counts: snr = 4.025268
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.970361 pixels
  Position = (798.7, 324.9) = 22 53 7.21 62 38 45.6
  Extent = 0.6 (0.3-1.3)", rotation angle = 0
  Source counts = 10.1 +/- 4.1
  Background counts = 6.3
  Rate = 0.0005 +/- 0.0002
[Wed Sep 28 08:04:47 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 08:04:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 08:04:47 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 08:04:47 2011] Source does appear to be extended
[Wed Sep 28 08:04:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 08:05:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 08:05:23 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Wed Sep 28 08:05:23 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.013
[Wed Sep 28 08:05:23 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.60"
[Wed Sep 28 08:05:25 2011] fullrun_ccd2_acisf09919_pi14-548_cl_pass1_src18.ximg exists
[Wed Sep 28 08:05:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09919_pi14-548_cl_pass1_src18.csv
[Wed Sep 28 08:05:25 2011] fullrun_ccd2_acisf09919_pi14-548_cl_pass1_src18_1.ximg exists
[Wed Sep 28 08:05:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09919_pi14-548_cl_pass1_src18.csv
[Wed Sep 28 08:05:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09919_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09919_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 08:05:25 2011] fullrun_ccd2_acisf09919_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Wed Sep 28 08:05:25 2011] fullrun_ccd2_acisf09919_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Sep 28 08:05:25 2011] Fit fullrun_ccd2_acisf09919_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Wed Sep 28 08:05:45 2011] Spatial fit model total counts = 17.884500, observed total counts = 18.000000
[Wed Sep 28 08:05:45 2011] Offset between fit and detection position for source 21 = 0.007818 pixels
[Wed Sep 28 08:05:45 2011] 18.573000 total counts/ 8.600470 bgd. counts: snr = 3.400512
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.007818 pixels
  Position = (798.7, 324.9) = 22 53 7.21 62 38 45.6
  Extent = 0.6 (0.3-1.4)", rotation angle = 0
  Source counts = 10.0 +/- 4.3
  Background counts = 8.6
  Rate = 0.0004 +/- 0.0002
[Wed Sep 28 08:05:45 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 08:05:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 08:05:45 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 08:05:45 2011] Source does appear to be extended
[Wed Sep 28 08:05:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 08:12:02 2011] Not overwriting source region fullrun_ccd2_acisf09919_pi14-548_pass1_cl_src21_src.reg
[Wed Sep 28 08:12:02 2011] Extracting stamp from image fullrun_ccd2_acisf09919_pi14-548_cl_sm2.00.img.gz, (771, 298) - (826, 352)
[Wed Sep 28 08:12:02 2011] Writing fullrun_ccd2_acisf09919_pi14-548_pass1_cl_src21.gif
[Wed Sep 28 08:13:09 2011] ../../acisf09919/products/events/fullrun_ccd2_acisf09919_pi14-548_pass1_cl_src21_src.evt and ../../acisf09919/products/events/fullrun_ccd2_acisf09919_pi14-548_pass1_cl_src21_bgd.evt exist, delete to re-create
[Wed Sep 28 08:13:09 2011] Size of ../../acisf09919/products/events/fullrun_ccd2_acisf09919_pi14-548_pass1_cl_src21_src.evt.gz[events] = 12 counts
[Wed Sep 28 08:13:09 2011] Mean chipx,y = (528.58, 859.50)
[Wed Sep 28 08:13:09 2011] Mean tdetx,y = (3920.50, 3557.42)
[Wed Sep 28 08:13:09 2011] chipx,y range = (510.00-542.00, 849.00-879.00)
[Wed Sep 28 08:13:09 2011] Size of ../../acisf09919/products/events/fullrun_ccd2_acisf09919_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 5 counts
[Wed Sep 28 08:13:09 2011] ../../acisf09919/products/images/fullrun_ccd2_acisf09919_pi14-548_pass1_cl_src21_src.img and ../../acisf09919/products/images/fullrun_ccd2_acisf09919_pi14-548_pass1_cl_src21_bgd.img exist, delete to re-create
[Wed Sep 28 08:13:09 2011] ../../acisf09919/products/spectra/fullrun_ccd2_acisf09919_pi14-548_pass1_cl_src21_src.pi and ../../acisf09919/products/spectra/fullrun_ccd2_acisf09919_pi14-548_pass1_cl_src21_bgd.pi exist, delete to re-create
[Wed Sep 28 08:13:09 2011] Not generating rmf since there are only 9 counts
[Wed Sep 28 08:13:16 2011] ../../acisf09919/products/lightcurves/fullrun_ccd2_acisf09919_pi14-548_pass1_cl_src21_src.lc and ../../acisf09919/products/lightcurves/fullrun_ccd2_acisf09919_pi14-548_pass1_cl_src21_bgd.lc exist, delete to re-create
[Wed Sep 28 08:13:51 2011] 160.888
[Wed Sep 28 08:16:59 2011] Updating aperture counts using extracted products
[Wed Sep 28 08:16:59 2011] Error reading totcts from fullrun_ccd2_acisf09919_pi14-548_pass1_cl_src21_src.pi.gz
[Wed Sep 28 08:16:59 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 08:16:59 2011] Using photon index=1.80, rate=0.000444, arf fullrun_ccd2_acisf09919_pi14-548_pass1_cl_src21.arf
[Wed Sep 28 08:16:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 08:16:59 2011] Updating source flux to 7.7e-15
[Wed Sep 28 08:17:30 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting