[Wed Sep 28 08:03:13 2011] Detection parameters:
  Position = (982.6, 838.2) = 22 53 36.28 62 31 44.9
  Extent = 0.7" x 0.5", rotation angle = 42 degrees
  Source counts = 196.5 +/- 14.1
  Background counts = 1.5
  Rate = 0.009 +/- 0.0006

[Wed Sep 28 08:03:15 2011] Off-axis axis estimate = 4.32'
[Wed Sep 28 08:04:26 2011] Using EEF radius (= 0.93 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 08:04:26 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 08:04:26 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Wed Sep 28 08:04:26 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.090
[Wed Sep 28 08:04:26 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.93"
[Wed Sep 28 08:04:27 2011] fullrun_ccd1_acisf09919_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 28 08:04:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09919_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 08:04:27 2011] fullrun_ccd1_acisf09919_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 28 08:04:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09919_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 08:04:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf09919_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf09919_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 08:04:28 2011] fullrun_ccd1_acisf09919_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 08:04:28 2011] fullrun_ccd1_acisf09919_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 08:04:28 2011] Fit fullrun_ccd1_acisf09919_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 08:04:44 2011] Spatial fit model total counts = 200.264000, observed total counts = 198.000000
[Wed Sep 28 08:04:44 2011] Offset between fit and detection position for source 15 = 0.525409 pixels
[Wed Sep 28 08:04:44 2011] 200.503520 total counts/ 3.353520 bgd. counts: snr = 107.658006
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.525409 pixels
  Position = (983.0, 838.5) = 22 53 36.29 62 31 44.9
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 197.2 +/- 14.2
  Background counts = 3.4
  Rate = 0.009 +/- 0.0006
[Wed Sep 28 08:04:44 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 08:04:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 08:04:44 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 08:04:44 2011] Source does appear to be extended
[Wed Sep 28 08:04:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 08:05:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 08:05:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 08:05:22 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Wed Sep 28 08:05:22 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.126
[Wed Sep 28 08:05:22 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.79"
[Wed Sep 28 08:05:22 2011] fullrun_ccd1_acisf09919_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 28 08:05:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09919_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 08:05:22 2011] fullrun_ccd1_acisf09919_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 28 08:05:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09919_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 08:05:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf09919_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf09919_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 08:05:23 2011] fullrun_ccd1_acisf09919_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 08:05:23 2011] fullrun_ccd1_acisf09919_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 08:05:23 2011] Fit fullrun_ccd1_acisf09919_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 08:05:43 2011] Spatial fit model total counts = 196.108000, observed total counts = 198.000000
[Wed Sep 28 08:05:43 2011] Offset between fit and detection position for source 15 = 0.005006 pixels
[Wed Sep 28 08:05:43 2011] 196.344990 total counts/ 2.867990 bgd. counts: snr = 114.245875
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.005006 pixels
  Position = (983.0, 838.5) = 22 53 36.29 62 31 44.9
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 193.5 +/- 14.0
  Background counts = 2.9
  Rate = 0.009 +/- 0.0006
[Wed Sep 28 08:05:43 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 08:05:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 08:05:43 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 08:05:43 2011] Source does appear to be extended
[Wed Sep 28 08:05:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 08:09:46 2011] Not overwriting source region fullrun_ccd1_acisf09919_pi14-548_pass1_cl_src15_src.reg
[Wed Sep 28 08:09:46 2011] Extracting stamp from image fullrun_ccd1_acisf09919_pi14-548_cl_sm2.00.img.gz, (946, 802) - (1020, 875)
[Wed Sep 28 08:09:46 2011] Writing fullrun_ccd1_acisf09919_pi14-548_pass1_cl_src15.gif
[Wed Sep 28 08:09:48 2011] ../../acisf09919/products/events/fullrun_ccd1_acisf09919_pi14-548_pass1_cl_src15_src.evt and ../../acisf09919/products/events/fullrun_ccd1_acisf09919_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Wed Sep 28 08:09:48 2011] Size of ../../acisf09919/products/events/fullrun_ccd1_acisf09919_pi14-548_pass1_cl_src15_src.evt.gz[events] = 197 counts
[Wed Sep 28 08:09:48 2011] Mean chipx,y = (151.50, 560.47)
[Wed Sep 28 08:09:48 2011] Mean tdetx,y = (4571.53, 4258.50)
[Wed Sep 28 08:09:48 2011] chipx,y range = (133.00-173.00, 543.00-578.00)
[Wed Sep 28 08:09:48 2011] Size of ../../acisf09919/products/events/fullrun_ccd1_acisf09919_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 16 counts
[Wed Sep 28 08:09:48 2011] ../../acisf09919/products/images/fullrun_ccd1_acisf09919_pi14-548_pass1_cl_src15_src.img and ../../acisf09919/products/images/fullrun_ccd1_acisf09919_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Wed Sep 28 08:09:48 2011] ../../acisf09919/products/spectra/fullrun_ccd1_acisf09919_pi14-548_pass1_cl_src15_src.pi and ../../acisf09919/products/spectra/fullrun_ccd1_acisf09919_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Wed Sep 28 08:09:51 2011] ../../acisf09919/products/lightcurves/fullrun_ccd1_acisf09919_pi14-548_pass1_cl_src15_src.lc and ../../acisf09919/products/lightcurves/fullrun_ccd1_acisf09919_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Wed Sep 28 08:12:00 2011] Keeping rmf generated by specextract
[Wed Sep 28 08:12:01 2011] 195.127
[Wed Sep 28 08:16:58 2011] Updating aperture counts using extracted products
[Wed Sep 28 08:16:58 2011] Error reading totcts from fullrun_ccd1_acisf09919_pi14-548_pass1_cl_src15_src.pi.gz
[Wed Sep 28 08:16:58 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 08:16:58 2011] Using photon index=1.80, rate=0.00861, arf fullrun_ccd1_acisf09919_pi14-548_pass1_cl_src15.arf
[Wed Sep 28 08:16:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 08:16:58 2011] Updating source flux to 1.2e-13
[Wed Sep 28 08:17:30 2011] Reading fit data from acisf09919/analysis//spectral/fullrun_ccd1_acisf09919_pi14-548_pass1_cl_src15_pl.csv
[Wed Sep 28 08:17:30 2011] Spectral fit parameter nH value = 1.29035e+22
[Wed Sep 28 08:17:30 2011] Spectral fit parameter PhoIndex value = 2.8526
[Wed Sep 28 08:17:30 2011] Failed to get F(0.3-8.0) from acisf09919/analysis//spectral/fullrun_ccd1_acisf09919_pi14-548_pass1_cl_src15_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 08:17:30 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 08:17:30 2011] Using Nh = 1.3e+22, photon index=2.85, rate=0.00861, arf fullrun_ccd1_acisf09919_pi14-548_pass1_cl_src15.arf
[Wed Sep 28 08:17:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 08:17:30 2011] Updating source flux to 9.4e-14