[Sat Sep 24 11:11:28 2011] Detection parameters:
  Position = (984.7, 352.8) = 5 46 18.91 -0 5 38.1
  Extent = 0.5" x 0.5", rotation angle = 18 degrees
  Source counts = 421.6 +/- 20.6
  Background counts = 3.4
  Rate = 0.01 +/- 0.0007

[Sat Sep 24 11:11:29 2011] Off-axis axis estimate = 1.70'
[Sat Sep 24 11:12:17 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 11:12:17 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Sat Sep 24 11:12:17 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.287
[Sat Sep 24 11:12:17 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.40"
[Sat Sep 24 11:12:18 2011] fullrun_ccd3_acisf09917_pi14-548_cl_pass0_src1.ximg exists
[Sat Sep 24 11:12:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09917_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 11:12:18 2011] fullrun_ccd3_acisf09917_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Sep 24 11:12:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09917_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 11:12:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09917_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09917_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 11:12:18 2011] fullrun_ccd3_acisf09917_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep 24 11:12:18 2011] fullrun_ccd3_acisf09917_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep 24 11:12:18 2011] Fit fullrun_ccd3_acisf09917_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep 24 11:12:28 2011] Spatial fit model total counts = 430.350000, observed total counts = 426.000000
[Sat Sep 24 11:12:28 2011] Offset between fit and detection position for source 1 = 0.724238 pixels
[Sat Sep 24 11:12:28 2011] 430.328700 total counts/ 23.256700 bgd. counts: snr = 84.410639
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.724238 pixels
  Position = (985.2, 353.3) = 5 46 18.91 -0 5 38.1
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 407.1 +/- 20.7
  Background counts = 23.3
  Rate = 0.01 +/- 0.0007
[Sat Sep 24 11:12:28 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 11:12:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 11:12:28 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 11:12:28 2011] Source does appear to be extended
[Sat Sep 24 11:12:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 11:13:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 11:13:04 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Sat Sep 24 11:13:04 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.154
[Sat Sep 24 11:13:04 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.44"
[Sat Sep 24 11:13:04 2011] fullrun_ccd3_acisf09917_pi14-548_cl_pass1_src1.ximg exists
[Sat Sep 24 11:13:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09917_pi14-548_cl_pass1_src1.csv
[Sat Sep 24 11:13:04 2011] fullrun_ccd3_acisf09917_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Sep 24 11:13:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09917_pi14-548_cl_pass1_src1.csv
[Sat Sep 24 11:13:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09917_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09917_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 11:13:08 2011] fullrun_ccd3_acisf09917_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 11:13:08 2011] fullrun_ccd3_acisf09917_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 11:13:08 2011] Fit fullrun_ccd3_acisf09917_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep 24 11:13:25 2011] Spatial fit model total counts = 425.955000, observed total counts = 426.000000
[Sat Sep 24 11:13:25 2011] Offset between fit and detection position for source 1 = 0.001440 pixels
[Sat Sep 24 11:13:25 2011] 425.937300 total counts/ 22.598300 bgd. counts: snr = 84.846187
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001440 pixels
  Position = (985.2, 353.3) = 5 46 18.91 -0 5 38.1
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 403.3 +/- 20.6
  Background counts = 22.6
  Rate = 0.01 +/- 0.0007
[Sat Sep 24 11:13:25 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 11:13:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 11:13:25 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 11:13:25 2011] Source does appear to be extended
[Sat Sep 24 11:13:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 11:16:39 2011] Not overwriting source region fullrun_ccd3_acisf09917_pi14-548_pass1_cl_src1_src.reg
[Sat Sep 24 11:16:39 2011] Extracting stamp from image fullrun_ccd3_acisf09917_pi14-548_cl_sm2.00.img.gz, (965, 333) - (1006, 374)
[Sat Sep 24 11:16:39 2011] Writing fullrun_ccd3_acisf09917_pi14-548_pass1_cl_src1.gif
[Sat Sep 24 11:16:41 2011] ../../acisf09917/products/events/fullrun_ccd3_acisf09917_pi14-548_pass1_cl_src1_src.evt and ../../acisf09917/products/events/fullrun_ccd3_acisf09917_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Sep 24 11:16:41 2011] Size of ../../acisf09917/products/events/fullrun_ccd3_acisf09917_pi14-548_pass1_cl_src1_src.evt.gz[events] = 408 counts
[Sat Sep 24 11:16:41 2011] Mean chipx,y = (808.70, 871.20)
[Sat Sep 24 11:16:41 2011] Mean tdetx,y = (4260.80, 3869.70)
[Sat Sep 24 11:16:41 2011] chipx,y range = (790.00-828.00, 853.00-888.00)
[Sat Sep 24 11:16:41 2011] Size of ../../acisf09917/products/events/fullrun_ccd3_acisf09917_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 11 counts
[Sat Sep 24 11:16:41 2011] ../../acisf09917/products/images/fullrun_ccd3_acisf09917_pi14-548_pass1_cl_src1_src.img and ../../acisf09917/products/images/fullrun_ccd3_acisf09917_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Sep 24 11:16:41 2011] ../../acisf09917/products/spectra/fullrun_ccd3_acisf09917_pi14-548_pass1_cl_src1_src.pi and ../../acisf09917/products/spectra/fullrun_ccd3_acisf09917_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Sep 24 11:16:44 2011] ../../acisf09917/products/lightcurves/fullrun_ccd3_acisf09917_pi14-548_pass1_cl_src1_src.lc and ../../acisf09917/products/lightcurves/fullrun_ccd3_acisf09917_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Sep 24 11:17:50 2011] Keeping rmf generated by specextract
[Sat Sep 24 11:17:51 2011] 199.951
[Sat Sep 24 11:17:55 2011] Updating aperture counts using extracted products
[Sat Sep 24 11:17:55 2011] Error reading totcts from fullrun_ccd3_acisf09917_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Sep 24 11:17:55 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 11:17:55 2011] Using photon index=1.80, rate=0.0135, arf fullrun_ccd3_acisf09917_pi14-548_pass1_cl_src1.arf
[Sat Sep 24 11:17:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 11:17:55 2011] Updating source flux to 1.5e-13
[Sat Sep 24 11:18:35 2011] Reading fit data from acisf09917/analysis//spectral/fullrun_ccd3_acisf09917_pi14-548_pass1_cl_src1_pl.csv
[Sat Sep 24 11:18:35 2011] Spectral fit parameter nH value = 4.48097e+21
[Sat Sep 24 11:18:35 2011] Spectral fit parameter PhoIndex value = 2.79229
[Sat Sep 24 11:18:35 2011] Failed to get F(0.3-8.0) from acisf09917/analysis//spectral/fullrun_ccd3_acisf09917_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Sep 24 11:18:35 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 11:18:35 2011] Using Nh = 4.5e+21, photon index=2.79, rate=0.0135, arf fullrun_ccd3_acisf09917_pi14-548_pass1_cl_src1.arf
[Sat Sep 24 11:18:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 11:18:35 2011] Updating source flux to 1.2e-13