[Sat Sep 24 11:11:24 2011] Detection parameters:
  Position = (962.9, 790.4) = 5 45 38.26 -0 8 11.3
  Extent = 3.0" x 2.9", rotation angle = 7 degrees
  Source counts = 122.1 +/- 12.2
  Background counts = 25.9
  Rate = 0.004 +/- 0.0004

[Sat Sep 24 11:11:24 2011] Off-axis axis estimate = 8.88'
[Sat Sep 24 11:12:14 2011] Using EEF radius (= 3.49 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 11:12:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 11:12:14 2011] Initial guess for spatial extent in simple fitting = 3.49"
[Sat Sep 24 11:12:14 2011] source mask rpix=7.1, npix_max = 230, mask sum = 225, frac = 0.977
[Sat Sep 24 11:12:14 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 3.49"
[Sat Sep 24 11:12:14 2011] fullrun_ccd0_acisf09917_pi14-548_cl_pass0_src3.ximg exists
[Sat Sep 24 11:12:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09917_pi14-548_cl_pass0_src3.csv
[Sat Sep 24 11:12:14 2011] fullrun_ccd0_acisf09917_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Sep 24 11:12:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09917_pi14-548_cl_pass0_src3.csv
[Sat Sep 24 11:12:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09917_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09917_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 11:12:14 2011] fullrun_ccd0_acisf09917_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Sep 24 11:12:14 2011] fullrun_ccd0_acisf09917_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Sep 24 11:12:14 2011] Fit fullrun_ccd0_acisf09917_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Sep 24 11:12:24 2011] Spatial fit model total counts = 157.106000, observed total counts = 157.000000
[Sat Sep 24 11:12:24 2011] Offset between fit and detection position for source 9 = 1.014858 pixels
[Sat Sep 24 11:12:24 2011] 157.213200 total counts/ 31.332200 bgd. counts: snr = 22.488720
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.014858 pixels
  Position = (963.8, 790.7) = 5 45 38.25 -0 8 11.4
  Extent = 3.3 (2.9-3.9)", rotation angle = 0
  Source counts = 125.9 +/- 12.5
  Background counts = 31.3
  Rate = 0.004 +/- 0.0004
[Sat Sep 24 11:12:24 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 11:12:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 11:12:24 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 11:12:24 2011] Source does appear to be extended
[Sat Sep 24 11:12:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 11:12:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 11:12:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 11:12:50 2011] Initial guess for spatial extent in simple fitting = 3.32"
[Sat Sep 24 11:12:50 2011] source mask rpix=6.7, npix_max = 210, mask sum = 210, frac = 0.999
[Sat Sep 24 11:12:50 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 3.32"
[Sat Sep 24 11:12:50 2011] fullrun_ccd0_acisf09917_pi14-548_cl_pass1_src3.ximg exists
[Sat Sep 24 11:12:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09917_pi14-548_cl_pass1_src3.csv
[Sat Sep 24 11:12:50 2011] fullrun_ccd0_acisf09917_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Sep 24 11:12:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09917_pi14-548_cl_pass1_src3.csv
[Sat Sep 24 11:12:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09917_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09917_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 11:12:51 2011] fullrun_ccd0_acisf09917_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Sep 24 11:12:51 2011] fullrun_ccd0_acisf09917_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Sep 24 11:12:51 2011] Fit fullrun_ccd0_acisf09917_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Sep 24 11:13:15 2011] Spatial fit model total counts = 153.022000, observed total counts = 153.000000
[Sat Sep 24 11:13:15 2011] Offset between fit and detection position for source 9 = 0.215139 pixels
[Sat Sep 24 11:13:15 2011] 153.187800 total counts/ 24.221800 bgd. counts: snr = 26.204267
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.215139 pixels
  Position = (963.9, 790.5) = 5 45 38.24 -0 8 11.5
  Extent = 3.4 (2.9-4.1)", rotation angle = 0
  Source counts = 129.0 +/- 12.4
  Background counts = 24.2
  Rate = 0.004 +/- 0.0004
[Sat Sep 24 11:13:15 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 11:13:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 11:13:15 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 11:13:15 2011] Source does appear to be extended
[Sat Sep 24 11:13:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 11:13:45 2011] Not overwriting source region fullrun_ccd0_acisf09917_pi14-548_pass1_cl_src9_src.reg
[Sat Sep 24 11:13:45 2011] Extracting stamp from image fullrun_ccd0_acisf09917_pi14-548_cl_sm2.00.img.gz, (808, 635) - (1120, 946)
[Sat Sep 24 11:13:45 2011] Writing fullrun_ccd0_acisf09917_pi14-548_pass1_cl_src9.gif
[Sat Sep 24 11:14:02 2011] ../../acisf09917/products/events/fullrun_ccd0_acisf09917_pi14-548_pass1_cl_src9_src.evt and ../../acisf09917/products/events/fullrun_ccd0_acisf09917_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sat Sep 24 11:14:03 2011] Size of ../../acisf09917/products/events/fullrun_ccd0_acisf09917_pi14-548_pass1_cl_src9_src.evt.gz[events] = 151 counts
[Sat Sep 24 11:14:03 2011] Mean chipx,y = (133.19, 592.80)
[Sat Sep 24 11:14:03 2011] Mean tdetx,y = (3653.80, 4998.81)
[Sat Sep 24 11:14:03 2011] chipx,y range = (105.00-173.00, 558.00-628.00)
[Sat Sep 24 11:14:04 2011] Size of ../../acisf09917/products/events/fullrun_ccd0_acisf09917_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 280 counts
[Sat Sep 24 11:14:04 2011] ../../acisf09917/products/images/fullrun_ccd0_acisf09917_pi14-548_pass1_cl_src9_src.img and ../../acisf09917/products/images/fullrun_ccd0_acisf09917_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Sat Sep 24 11:14:04 2011] ../../acisf09917/products/spectra/fullrun_ccd0_acisf09917_pi14-548_pass1_cl_src9_src.pi and ../../acisf09917/products/spectra/fullrun_ccd0_acisf09917_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sat Sep 24 11:14:08 2011] ../../acisf09917/products/lightcurves/fullrun_ccd0_acisf09917_pi14-548_pass1_cl_src9_src.lc and ../../acisf09917/products/lightcurves/fullrun_ccd0_acisf09917_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sat Sep 24 11:14:32 2011] Keeping rmf generated by specextract
[Sat Sep 24 11:14:32 2011] 167.313
[Sat Sep 24 11:17:54 2011] Updating aperture counts using extracted products
[Sat Sep 24 11:17:54 2011] Error reading totcts from fullrun_ccd0_acisf09917_pi14-548_pass1_cl_src9_src.pi.gz
[Sat Sep 24 11:17:54 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 11:17:54 2011] Using photon index=1.80, rate=0.00433, arf fullrun_ccd0_acisf09917_pi14-548_pass1_cl_src9.arf
[Sat Sep 24 11:17:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 11:17:54 2011] Updating source flux to 5.8e-14
[Sat Sep 24 11:18:07 2011] Reading fit data from acisf09917/analysis//spectral/fullrun_ccd0_acisf09917_pi14-548_pass1_cl_src9_pl.csv
[Sat Sep 24 11:18:07 2011] Spectral fit parameter nH value = 1.44297e+21
[Sat Sep 24 11:18:07 2011] Spectral fit parameter PhoIndex value = 2.74989
[Sat Sep 24 11:18:07 2011] Failed to get F(0.3-8.0) from acisf09917/analysis//spectral/fullrun_ccd0_acisf09917_pi14-548_pass1_cl_src9_pl.csv, possibly due to different flux energy range selected
[Sat Sep 24 11:18:07 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 11:18:07 2011] Using Nh = 1.4e+21, photon index=2.75, rate=0.00433, arf fullrun_ccd0_acisf09917_pi14-548_pass1_cl_src9.arf
[Sat Sep 24 11:18:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 11:18:07 2011] Updating source flux to 4.8e-14