[Mon Oct 17 22:56:37 2011] Detection parameters:
  Position = (782.3, 652.2) = 5 46 16.37 -0 1 18.7
  Extent = 0.9" x 0.5", rotation angle = 37 degrees
  Source counts = 15.3 +/- 4.0
  Background counts = 0.7
  Rate = 0.0008 +/- 0.0002

[Mon Oct 17 22:56:38 2011] Off-axis axis estimate = 5.12'
[Mon Oct 17 22:57:08 2011] Using EEF radius (= 1.23 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 22:57:08 2011] Initial guess for spatial extent in simple fitting = 1.23"
[Mon Oct 17 22:57:08 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.004
[Mon Oct 17 22:57:08 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 1.23"
[Mon Oct 17 22:57:09 2011] fullrun_ccd3_acisf09916_pi14-548_cl_pass0_src9.ximg exists
[Mon Oct 17 22:57:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09916_pi14-548_cl_pass0_src9.csv
[Mon Oct 17 22:57:09 2011] fullrun_ccd3_acisf09916_pi14-548_cl_pass0_src9_1.ximg exists
[Mon Oct 17 22:57:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09916_pi14-548_cl_pass0_src9.csv
[Mon Oct 17 22:57:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09916_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09916_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 22:57:09 2011] fullrun_ccd3_acisf09916_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Mon Oct 17 22:57:09 2011] fullrun_ccd3_acisf09916_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Oct 17 22:57:09 2011] Fit fullrun_ccd3_acisf09916_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Oct 17 22:57:16 2011] Spatial fit model total counts = 17.476000, observed total counts = 18.000000
[Mon Oct 17 22:57:16 2011] Offset between fit and detection position for source 9 = 0.299830 pixels
[Mon Oct 17 22:57:16 2011] 17.745980 total counts/ 2.266680 bgd. counts: snr = 10.281494
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.299830 pixels
  Position = (782.6, 652.2) = 5 46 16.38 -0 1 19.0
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 15.5 +/- 4.2
  Background counts = 2.3
  Rate = 0.0008 +/- 0.0002
[Mon Oct 17 22:57:16 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 22:57:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 22:57:16 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 22:57:16 2011] Source does appear to be extended
[Mon Oct 17 22:57:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 22:57:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 22:57:32 2011] Initial guess for spatial extent in simple fitting = 0.90"
[Mon Oct 17 22:57:32 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.143
[Mon Oct 17 22:57:32 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.90"
[Mon Oct 17 22:57:33 2011] fullrun_ccd3_acisf09916_pi14-548_cl_pass1_src9.ximg exists
[Mon Oct 17 22:57:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09916_pi14-548_cl_pass1_src9.csv
[Mon Oct 17 22:57:33 2011] fullrun_ccd3_acisf09916_pi14-548_cl_pass1_src9_1.ximg exists
[Mon Oct 17 22:57:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09916_pi14-548_cl_pass1_src9.csv
[Mon Oct 17 22:57:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09916_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09916_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 22:57:33 2011] fullrun_ccd3_acisf09916_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Mon Oct 17 22:57:33 2011] fullrun_ccd3_acisf09916_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Oct 17 22:57:33 2011] Fit fullrun_ccd3_acisf09916_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Oct 17 22:57:39 2011] Spatial fit model total counts = 17.954300, observed total counts = 18.000000
[Mon Oct 17 22:57:39 2011] Offset between fit and detection position for source 9 = 0.139204 pixels
[Mon Oct 17 22:57:39 2011] 17.996350 total counts/ 1.144450 bgd. counts: snr = 15.752535
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.139204 pixels
  Position = (782.7, 652.3) = 5 46 16.37 -0 1 19.0
  Extent = 1.0 (0.6-1.4)", rotation angle = 0
  Source counts = 16.9 +/- 4.2
  Background counts = 1.1
  Rate = 0.0009 +/- 0.0002
[Mon Oct 17 22:57:39 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 22:57:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 22:57:39 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 22:57:39 2011] Source does appear to be extended
[Mon Oct 17 22:57:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 22:59:21 2011] Not overwriting source region fullrun_ccd3_acisf09916_pi14-548_pass1_cl_src9_src.reg
[Mon Oct 17 22:59:21 2011] Extracting stamp from image fullrun_ccd3_acisf09916_pi14-548_cl_sm2.00.img.gz, (738, 608) - (827, 697)
[Mon Oct 17 22:59:21 2011] Writing fullrun_ccd3_acisf09916_pi14-548_pass1_cl_src9.gif
[Mon Oct 17 22:59:44 2011] ../../acisf09916/products/events/fullrun_ccd3_acisf09916_pi14-548_pass1_cl_src9_src.evt and ../../acisf09916/products/events/fullrun_ccd3_acisf09916_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Mon Oct 17 22:59:44 2011] Size of ../../acisf09916/products/events/fullrun_ccd3_acisf09916_pi14-548_pass1_cl_src9_src.evt.gz[events] = 17 counts
[Mon Oct 17 22:59:44 2011] Mean chipx,y = (595.65, 512.00)
[Mon Oct 17 22:59:44 2011] Mean tdetx,y = (4620.00, 3656.65)
[Mon Oct 17 22:59:44 2011] chipx,y range = (581.00-612.00, 493.00-531.00)
[Mon Oct 17 22:59:44 2011] Size of ../../acisf09916/products/events/fullrun_ccd3_acisf09916_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 18 counts
[Mon Oct 17 22:59:44 2011] ../../acisf09916/products/images/fullrun_ccd3_acisf09916_pi14-548_pass1_cl_src9_src.img and ../../acisf09916/products/images/fullrun_ccd3_acisf09916_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Mon Oct 17 22:59:44 2011] ../../acisf09916/products/spectra/fullrun_ccd3_acisf09916_pi14-548_pass1_cl_src9_src.pi and ../../acisf09916/products/spectra/fullrun_ccd3_acisf09916_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Mon Oct 17 22:59:44 2011] Not generating rmf since there are only 16 counts
[Mon Oct 17 22:59:47 2011] ../../acisf09916/products/lightcurves/fullrun_ccd3_acisf09916_pi14-548_pass1_cl_src9_src.lc and ../../acisf09916/products/lightcurves/fullrun_ccd3_acisf09916_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Mon Oct 17 23:00:30 2011] 185.826
[Mon Oct 17 23:00:32 2011] Updating aperture counts using extracted products
[Mon Oct 17 23:00:32 2011] Error reading totcts from fullrun_ccd3_acisf09916_pi14-548_pass1_cl_src9_src.pi.gz
[Mon Oct 17 23:00:33 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 23:00:33 2011] Using photon index=1.80, rate=0.000916, arf fullrun_ccd3_acisf09916_pi14-548_pass1_cl_src9.arf
[Mon Oct 17 23:00:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 23:00:33 2011] Updating source flux to 1.1e-14
[Mon Oct 17 23:00:41 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting