[Sun Oct  2 19:28:06 2011] Detection parameters:
  Position = (823.9, 415.6) = 16 21 56.51 -50 3 22.0
  Extent = 0.7" x 0.5", rotation angle = 15 degrees
  Source counts = 16.3 +/- 4.2
  Background counts = 1.7
  Rate = 0.0003 +/- 7e-05

[Sun Oct  2 19:28:08 2011] Off-axis axis estimate = 3.77'
[Sun Oct  2 19:29:34 2011] Using EEF radius (= 0.76 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 19:29:34 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Sun Oct  2 19:29:34 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.951
[Sun Oct  2 19:29:34 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 0.76"
[Sun Oct  2 19:29:36 2011] fullrun_ccd3_acisf09911_pi14-548_cl_pass0_src29.ximg exists
[Sun Oct  2 19:29:36 2011] fullrun_ccd3_acisf09911_pi14-548_cl_pass0_src29_1.ximg exists
[Sun Oct  2 19:29:36 2011] Fit fullrun_ccd3_acisf09911_pi14-548_cl_pass0_src29 appears to have run properly
[Sun Oct  2 19:29:37 2011] fullrun_ccd3_acisf09911_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Sun Oct  2 19:29:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09911_pi14-548_cl_pass0_tfrozen_src29.csv
[Sun Oct  2 19:29:37 2011] fullrun_ccd3_acisf09911_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Sun Oct  2 19:29:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09911_pi14-548_cl_pass0_tfrozen_src29.csv
[Sun Oct  2 19:29:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09911_pi14-548_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09911_pi14-548_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 19:29:56 2011] Spatial fit model total counts = 16.735400, observed total counts = 19.000000
[Sun Oct  2 19:29:56 2011] Offset between fit and detection position for source 30 = 0.432342 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.432342 pixels
  Position = (824.0, 416.0) = 16 21 56.53 -50 3 22.0
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 17.8 +/- 4.2
  Background counts = 0.0
  Rate = 0.0003 +/- 7e-05
[Sun Oct  2 19:29:56 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 19:29:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 19:29:56 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 19:29:56 2011] Source does appear to be extended
[Sun Oct  2 19:29:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 19:30:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 19:30:27 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Sun Oct  2 19:30:27 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.173
[Sun Oct  2 19:30:27 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 0.66"
[Sun Oct  2 19:30:28 2011] fullrun_ccd3_acisf09911_pi14-548_cl_pass1_src27.ximg exists
[Sun Oct  2 19:30:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09911_pi14-548_cl_pass1_src27.csv
[Sun Oct  2 19:30:28 2011] fullrun_ccd3_acisf09911_pi14-548_cl_pass1_src27_1.ximg exists
[Sun Oct  2 19:30:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09911_pi14-548_cl_pass1_src27.csv
[Sun Oct  2 19:30:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09911_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09911_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 19:30:29 2011] fullrun_ccd3_acisf09911_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Sun Oct  2 19:30:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09911_pi14-548_cl_pass1_tfrozen_src27.csv
[Sun Oct  2 19:30:29 2011] fullrun_ccd3_acisf09911_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Sun Oct  2 19:30:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09911_pi14-548_cl_pass1_tfrozen_src27.csv
[Sun Oct  2 19:30:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09911_pi14-548_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09911_pi14-548_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 19:30:51 2011] Spatial fit model total counts = 18.949600, observed total counts = 21.000000
[Sun Oct  2 19:30:51 2011] Offset between fit and detection position for source 30 = 0.116824 pixels
[Sun Oct  2 19:30:51 2011] 20.549800 total counts/ 3.131000 bgd. counts: snr = 9.844115
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.116824 pixels
  Position = (824.1, 415.9) = 16 21 56.53 -50 3 22.0
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 17.4 +/- 4.5
  Background counts = 3.1
  Rate = 0.0003 +/- 8e-05
[Sun Oct  2 19:30:51 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 19:30:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 19:30:51 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 19:30:51 2011] Source does appear to be extended
[Sun Oct  2 19:30:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 19:36:33 2011] Not overwriting source region fullrun_ccd3_acisf09911_pi14-548_pass1_cl_src30_src.reg
[Sun Oct  2 19:36:33 2011] Extracting stamp from image fullrun_ccd3_acisf09911_pi14-548_cl_sm2.00.img.gz, (795, 386) - (854, 445)
[Sun Oct  2 19:36:33 2011] Writing fullrun_ccd3_acisf09911_pi14-548_pass1_cl_src30.gif
[Sun Oct  2 19:38:08 2011] ../../acisf09911/products/events/fullrun_ccd3_acisf09911_pi14-548_pass1_cl_src30_src.evt and ../../acisf09911/products/events/fullrun_ccd3_acisf09911_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Sun Oct  2 19:38:08 2011] Size of ../../acisf09911/products/events/fullrun_ccd3_acisf09911_pi14-548_pass1_cl_src30_src.evt.gz[events] = 18 counts
[Sun Oct  2 19:38:08 2011] Mean chipx,y = (830.06, 584.83)
[Sun Oct  2 19:38:08 2011] Mean tdetx,y = (4547.17, 3891.06)
[Sun Oct  2 19:38:08 2011] chipx,y range = (813.00-846.00, 563.00-596.00)
[Sun Oct  2 19:38:08 2011] Size of ../../acisf09911/products/events/fullrun_ccd3_acisf09911_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 17 counts
[Sun Oct  2 19:38:08 2011] ../../acisf09911/products/images/fullrun_ccd3_acisf09911_pi14-548_pass1_cl_src30_src.img and ../../acisf09911/products/images/fullrun_ccd3_acisf09911_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Sun Oct  2 19:38:08 2011] ../../acisf09911/products/spectra/fullrun_ccd3_acisf09911_pi14-548_pass1_cl_src30_src.pi and ../../acisf09911/products/spectra/fullrun_ccd3_acisf09911_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Sun Oct  2 19:38:08 2011] Not generating rmf since there are only 17 counts
[Sun Oct  2 19:38:11 2011] ../../acisf09911/products/lightcurves/fullrun_ccd3_acisf09911_pi14-548_pass1_cl_src30_src.lc and ../../acisf09911/products/lightcurves/fullrun_ccd3_acisf09911_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Sun Oct  2 19:38:51 2011] 194.336
[Sun Oct  2 19:39:09 2011] Updating aperture counts using extracted products
[Sun Oct  2 19:39:09 2011] Error reading totcts from fullrun_ccd3_acisf09911_pi14-548_pass1_cl_src30_src.pi.gz
[Sun Oct  2 19:39:09 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 19:39:09 2011] Using photon index=1.80, rate=0.00029, arf fullrun_ccd3_acisf09911_pi14-548_pass1_cl_src30.arf
[Sun Oct  2 19:39:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 19:39:09 2011] Updating source flux to 5.1e-15
[Sun Oct  2 19:39:22 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting