[Sun Oct  2 19:27:56 2011] Detection parameters:
  Position = (956.4, 1017.0) = 16 22 4.59 -50 10 8.2
  Extent = 0.8" x 0.5", rotation angle = 85 degrees
  Source counts = 13.1 +/- 3.9
  Background counts = 1.9
  Rate = 0.0002 +/- 6e-05

[Sun Oct  2 19:27:57 2011] Off-axis axis estimate = 4.13'
[Sun Oct  2 19:29:29 2011] Using EEF radius (= 0.87 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 19:29:29 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Sun Oct  2 19:29:29 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.972
[Sun Oct  2 19:29:29 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.87"
[Sun Oct  2 19:29:30 2011] fullrun_ccd0_acisf09911_pi14-548_cl_pass0_src18.ximg exists
[Sun Oct  2 19:29:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09911_pi14-548_cl_pass0_src18.csv
[Sun Oct  2 19:29:30 2011] fullrun_ccd0_acisf09911_pi14-548_cl_pass0_src18_1.ximg exists
[Sun Oct  2 19:29:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09911_pi14-548_cl_pass0_src18.csv
[Sun Oct  2 19:29:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09911_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09911_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 19:29:31 2011] fullrun_ccd0_acisf09911_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Sun Oct  2 19:29:31 2011] fullrun_ccd0_acisf09911_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Oct  2 19:29:31 2011] Fit fullrun_ccd0_acisf09911_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Sun Oct  2 19:29:45 2011] Spatial fit model total counts = 18.789500, observed total counts = 19.000000
[Sun Oct  2 19:29:45 2011] Offset between fit and detection position for source 30 = 1.033011 pixels
[Sun Oct  2 19:29:45 2011] 18.274710 total counts/ 5.154510 bgd. counts: snr = 5.778921
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.033011 pixels
  Position = (957.0, 1017.9) = 16 22 4.59 -50 10 8.0
  Extent = 0.7 (0.5-1.2)", rotation angle = 0
  Source counts = 13.1 +/- 4.3
  Background counts = 5.2
  Rate = 0.0002 +/- 7e-05
[Sun Oct  2 19:29:45 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 19:29:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 19:29:45 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 19:29:45 2011] Source does appear to be extended
[Sun Oct  2 19:29:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 19:30:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 19:30:21 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Sun Oct  2 19:30:21 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.002
[Sun Oct  2 19:30:21 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.74"
[Sun Oct  2 19:30:22 2011] fullrun_ccd0_acisf09911_pi14-548_cl_pass1_src18.ximg exists
[Sun Oct  2 19:30:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09911_pi14-548_cl_pass1_src18.csv
[Sun Oct  2 19:30:22 2011] fullrun_ccd0_acisf09911_pi14-548_cl_pass1_src18_1.ximg exists
[Sun Oct  2 19:30:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09911_pi14-548_cl_pass1_src18.csv
[Sun Oct  2 19:30:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09911_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09911_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 19:30:23 2011] fullrun_ccd0_acisf09911_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Sun Oct  2 19:30:23 2011] fullrun_ccd0_acisf09911_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Oct  2 19:30:23 2011] Fit fullrun_ccd0_acisf09911_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Sun Oct  2 19:30:38 2011] Spatial fit model total counts = 18.727800, observed total counts = 19.000000
[Sun Oct  2 19:30:38 2011] Offset between fit and detection position for source 30 = 0.027443 pixels
[Sun Oct  2 19:30:38 2011] 18.024660 total counts/ 4.993360 bgd. counts: snr = 5.831648
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.027443 pixels
  Position = (957.0, 1017.8) = 16 22 4.59 -50 10 8.0
  Extent = 0.7 (0.5-1.1)", rotation angle = 0
  Source counts = 13.0 +/- 4.2
  Background counts = 5.0
  Rate = 0.0002 +/- 7e-05
[Sun Oct  2 19:30:38 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 19:30:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 19:30:38 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 19:30:38 2011] Source does appear to be extended
[Sun Oct  2 19:30:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 19:31:14 2011] Not overwriting source region fullrun_ccd0_acisf09911_pi14-548_pass1_cl_src30_src.reg
[Sun Oct  2 19:31:14 2011] Extracting stamp from image fullrun_ccd0_acisf09911_pi14-548_cl_sm2.00.img.gz, (924, 984) - (990, 1051)
[Sun Oct  2 19:31:14 2011] Writing fullrun_ccd0_acisf09911_pi14-548_pass1_cl_src30.gif
[Sun Oct  2 19:32:20 2011] ../../acisf09911/products/events/fullrun_ccd0_acisf09911_pi14-548_pass1_cl_src30_src.evt and ../../acisf09911/products/events/fullrun_ccd0_acisf09911_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Sun Oct  2 19:32:20 2011] Size of ../../acisf09911/products/events/fullrun_ccd0_acisf09911_pi14-548_pass1_cl_src30_src.evt.gz[events] = 15 counts
[Sun Oct  2 19:32:20 2011] Mean chipx,y = (636.27, 909.87)
[Sun Oct  2 19:32:20 2011] Mean tdetx,y = (3970.87, 4495.73)
[Sun Oct  2 19:32:20 2011] chipx,y range = (616.00-649.00, 887.00-923.00)
[Sun Oct  2 19:32:20 2011] Size of ../../acisf09911/products/events/fullrun_ccd0_acisf09911_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 31 counts
[Sun Oct  2 19:32:21 2011] ../../acisf09911/products/images/fullrun_ccd0_acisf09911_pi14-548_pass1_cl_src30_src.img and ../../acisf09911/products/images/fullrun_ccd0_acisf09911_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Sun Oct  2 19:32:21 2011] ../../acisf09911/products/spectra/fullrun_ccd0_acisf09911_pi14-548_pass1_cl_src30_src.pi and ../../acisf09911/products/spectra/fullrun_ccd0_acisf09911_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Sun Oct  2 19:32:21 2011] Not generating rmf since there are only 13 counts
[Sun Oct  2 19:32:24 2011] ../../acisf09911/products/lightcurves/fullrun_ccd0_acisf09911_pi14-548_pass1_cl_src30_src.lc and ../../acisf09911/products/lightcurves/fullrun_ccd0_acisf09911_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Sun Oct  2 19:32:55 2011] 187.53
[Sun Oct  2 19:39:06 2011] Updating aperture counts using extracted products
[Sun Oct  2 19:39:06 2011] Error reading totcts from fullrun_ccd0_acisf09911_pi14-548_pass1_cl_src30_src.pi.gz
[Sun Oct  2 19:39:07 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 19:39:07 2011] Using photon index=1.80, rate=0.000217, arf fullrun_ccd0_acisf09911_pi14-548_pass1_cl_src30.arf
[Sun Oct  2 19:39:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 19:39:07 2011] Updating source flux to 4e-15
[Sun Oct  2 19:39:16 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting