[Sat Sep 24 08:39:51 2011] Detection parameters:
  Position = (1032.9, 678.4) = 14 32 0.78 34 30 48.4
  Extent = 0.7" x 0.6", rotation angle = 116 degrees
  Source counts = 101.9 +/- 10.4
  Background counts = 7.1
  Rate = 0.002 +/- 0.0002

[Sat Sep 24 08:39:51 2011] Off-axis axis estimate = 5.38'
[Sat Sep 24 08:40:47 2011] Using EEF radius (= 1.34 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 08:40:47 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 08:40:47 2011] Initial guess for spatial extent in simple fitting = 1.34"
[Sat Sep 24 08:40:47 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.012
[Sat Sep 24 08:40:47 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.34"
[Sat Sep 24 08:40:47 2011] fullrun_ccd6_acisf09896_pi14-548_cl_pass0_src1.ximg exists
[Sat Sep 24 08:40:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09896_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 08:40:47 2011] fullrun_ccd6_acisf09896_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Sep 24 08:40:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09896_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 08:40:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf09896_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf09896_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 08:40:48 2011] fullrun_ccd6_acisf09896_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep 24 08:40:48 2011] fullrun_ccd6_acisf09896_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep 24 08:40:48 2011] Fit fullrun_ccd6_acisf09896_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep 24 08:40:58 2011] Spatial fit model total counts = 156.894000, observed total counts = 155.000000
[Sat Sep 24 08:40:58 2011] Offset between fit and detection position for source 25 = 1.823290 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.823290 pixels
  Position = (1034.1, 677.0) = 14 32 0.76 34 30 47.4
  Extent = 1.9 (1.7-2.1)", rotation angle = 0
  Source counts = 156.5 +/- 12.5
  Background counts = 0.0
  Rate = 0.003 +/- 0.0002
[Sat Sep 24 08:40:58 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 08:40:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 08:40:58 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 08:40:58 2011] Source does appear to be extended
[Sat Sep 24 08:40:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 08:41:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 08:41:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 08:41:30 2011] Initial guess for spatial extent in simple fitting = 1.91"
[Sat Sep 24 08:41:30 2011] source mask rpix=3.9, npix_max = 76, mask sum = 64, frac = 0.831
[Sat Sep 24 08:41:30 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.91"
[Sat Sep 24 08:41:31 2011] fullrun_ccd6_acisf09896_pi14-548_cl_pass1_src1.ximg exists
[Sat Sep 24 08:41:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09896_pi14-548_cl_pass1_src1.csv
[Sat Sep 24 08:41:31 2011] fullrun_ccd6_acisf09896_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Sep 24 08:41:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09896_pi14-548_cl_pass1_src1.csv
[Sat Sep 24 08:41:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf09896_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf09896_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 08:41:31 2011] fullrun_ccd6_acisf09896_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 08:41:31 2011] fullrun_ccd6_acisf09896_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 08:41:31 2011] Fit fullrun_ccd6_acisf09896_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep 24 08:41:44 2011] Spatial fit model total counts = 172.000000, observed total counts = 172.000000
[Sat Sep 24 08:41:44 2011] Offset between fit and detection position for source 25 = 0.223624 pixels
[Sat Sep 24 08:41:44 2011] 172.096100 total counts/ 26.824100 bgd. counts: snr = 28.049126
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.223624 pixels
  Position = (1033.9, 677.2) = 14 32 0.76 34 30 47.5
  Extent = 1.8 (1.7-2.1)", rotation angle = 0
  Source counts = 145.3 +/- 13.1
  Background counts = 26.8
  Rate = 0.003 +/- 0.0003
[Sat Sep 24 08:41:44 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 08:41:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 08:41:44 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 08:41:44 2011] Source does appear to be extended
[Sat Sep 24 08:41:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 08:43:13 2011] Not overwriting source region fullrun_ccd6_acisf09896_pi14-548_pass1_cl_src25_src.reg
[Sat Sep 24 08:43:13 2011] Extracting stamp from image fullrun_ccd6_acisf09896_pi14-548_cl_sm2.00.img.gz, (950, 593) - (1118, 761)
[Sat Sep 24 08:43:13 2011] Writing fullrun_ccd6_acisf09896_pi14-548_pass1_cl_src25.gif
[Sat Sep 24 08:43:15 2011] ../../acisf09896/products/events/fullrun_ccd6_acisf09896_pi14-548_pass1_cl_src25_src.evt and ../../acisf09896/products/events/fullrun_ccd6_acisf09896_pi14-548_pass1_cl_src25_bgd.evt exist, delete to re-create
[Sat Sep 24 08:43:15 2011] Size of ../../acisf09896/products/events/fullrun_ccd6_acisf09896_pi14-548_pass1_cl_src25_src.evt.gz[events] = 165 counts
[Sat Sep 24 08:43:15 2011] Mean chipx,y = (659.36, 816.09)
[Sat Sep 24 08:43:15 2011] Mean tdetx,y = (3534.36, 2518.09)
[Sat Sep 24 08:43:15 2011] chipx,y range = (633.00-681.00, 793.00-841.00)
[Sat Sep 24 08:43:15 2011] Size of ../../acisf09896/products/events/fullrun_ccd6_acisf09896_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 170 counts
[Sat Sep 24 08:43:15 2011] ../../acisf09896/products/images/fullrun_ccd6_acisf09896_pi14-548_pass1_cl_src25_src.img and ../../acisf09896/products/images/fullrun_ccd6_acisf09896_pi14-548_pass1_cl_src25_bgd.img exist, delete to re-create
[Sat Sep 24 08:43:15 2011] ../../acisf09896/products/spectra/fullrun_ccd6_acisf09896_pi14-548_pass1_cl_src25_src.pi and ../../acisf09896/products/spectra/fullrun_ccd6_acisf09896_pi14-548_pass1_cl_src25_bgd.pi exist, delete to re-create
[Sat Sep 24 08:43:19 2011] ../../acisf09896/products/lightcurves/fullrun_ccd6_acisf09896_pi14-548_pass1_cl_src25_src.lc and ../../acisf09896/products/lightcurves/fullrun_ccd6_acisf09896_pi14-548_pass1_cl_src25_bgd.lc exist, delete to re-create
[Sat Sep 24 08:44:28 2011] Keeping rmf generated by specextract
[Sat Sep 24 08:44:29 2011] 190.633
[Sat Sep 24 08:46:51 2011] Updating aperture counts using extracted products
[Sat Sep 24 08:46:51 2011] Error reading totcts from fullrun_ccd6_acisf09896_pi14-548_pass1_cl_src25_src.pi.gz
[Sat Sep 24 08:46:51 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 08:46:51 2011] Using photon index=1.80, rate=0.00285, arf fullrun_ccd6_acisf09896_pi14-548_pass1_cl_src25.arf
[Sat Sep 24 08:46:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 08:46:51 2011] Updating source flux to 3.3e-14
[Sat Sep 24 08:47:24 2011] Reading fit data from acisf09896/analysis//spectral/fullrun_ccd6_acisf09896_pi14-548_pass1_cl_src25_pl.csv
[Sat Sep 24 08:47:24 2011] Spectral fit parameter nH value = 3.55089e+13
[Sat Sep 24 08:47:24 2011] Spectral fit parameter PhoIndex value = 1.54221
[Sat Sep 24 08:47:24 2011] Failed to get F(0.3-8.0) from acisf09896/analysis//spectral/fullrun_ccd6_acisf09896_pi14-548_pass1_cl_src25_pl.csv, possibly due to different flux energy range selected
[Sat Sep 24 08:47:24 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 08:47:24 2011] Using Nh = 3.6e+13, photon index=1.54, rate=0.00285, arf fullrun_ccd6_acisf09896_pi14-548_pass1_cl_src25.arf
[Sat Sep 24 08:47:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 08:47:24 2011] Updating source flux to 3.6e-14