[Sat Oct 29 07:36:05 2011] Detection parameters:
  Position = (1098.3, 493.5) = 14 26 55.81 33 13 19.5
  Extent = 0.5" x 0.5", rotation angle = 2 degrees
  Source counts = 24.6 +/- 5.1
  Background counts = 1.4
  Rate = 0.0008 +/- 0.0002

[Sat Oct 29 07:36:07 2011] Off-axis axis estimate = 2.84'
[Sat Oct 29 07:36:54 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 07:36:54 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Sat Oct 29 07:36:54 2011] source mask rpix=1.1, npix_max = 10, mask sum = 7, frac = 0.669
[Sat Oct 29 07:36:54 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.55"
[Sat Oct 29 07:36:55 2011] fullrun_ccd7_acisf09895_pi14-548_cl_pass0_src13.ximg exists
[Sat Oct 29 07:36:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09895_pi14-548_cl_pass0_src13.csv
[Sat Oct 29 07:36:55 2011] fullrun_ccd7_acisf09895_pi14-548_cl_pass0_src13_1.ximg exists
[Sat Oct 29 07:36:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09895_pi14-548_cl_pass0_src13.csv
[Sat Oct 29 07:36:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09895_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09895_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 07:36:55 2011] fullrun_ccd7_acisf09895_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Sat Oct 29 07:36:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09895_pi14-548_cl_pass0_tfrozen_src13.csv
[Sat Oct 29 07:36:55 2011] fullrun_ccd7_acisf09895_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Oct 29 07:36:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09895_pi14-548_cl_pass0_tfrozen_src13.csv
[Sat Oct 29 07:36:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09895_pi14-548_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09895_pi14-548_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 07:37:04 2011] Spatial fit model total counts = 36.328700, observed total counts = 78.000000
[Sat Oct 29 07:37:04 2011] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Oct 29 07:37:04 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 07:37:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 07:37:04 2011] Assessing source extent using major
[Sat Oct 29 07:37:04 2011] Source does appear to be extended
[Sat Oct 29 07:37:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 07:37:22 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 07:37:22 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Sat Oct 29 07:37:22 2011] source mask rpix=1.1, npix_max = 10, mask sum = 7, frac = 0.669
[Sat Oct 29 07:37:22 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.55"
[Sat Oct 29 07:37:23 2011] fullrun_ccd7_acisf09895_pi14-548_cl_pass1_src13.ximg exists
[Sat Oct 29 07:37:23 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf09895_pi14-548_cl_pass1_src13.csv
[Sat Oct 29 07:37:23 2011] fullrun_ccd7_acisf09895_pi14-548_cl_pass1_src13_1.ximg exists
[Sat Oct 29 07:37:23 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf09895_pi14-548_cl_pass1_src13.csv
[Sat Oct 29 07:37:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09895_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09895_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 07:37:24 2011] fullrun_ccd7_acisf09895_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sat Oct 29 07:37:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09895_pi14-548_cl_pass1_tfrozen_src13.csv
[Sat Oct 29 07:37:24 2011] fullrun_ccd7_acisf09895_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Oct 29 07:37:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09895_pi14-548_cl_pass1_tfrozen_src13.csv
[Sat Oct 29 07:37:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09895_pi14-548_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09895_pi14-548_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 07:37:32 2011] Source 4 is offset by -0.310535 and 3.629963 pixels which is larger than
2 X fitted extent = 0.510569 x 0.510569, not incorporating fit results
[Sat Oct 29 07:37:32 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 07:37:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 07:37:32 2011] Assessing source extent using major
[Sat Oct 29 07:37:32 2011] Source does appear to be extended
[Sat Oct 29 07:37:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 07:50:07 2011] Not overwriting source region fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src4_src.reg
[Sat Oct 29 07:50:07 2011] Extracting stamp from image fullrun_ccd7_acisf09895_pi14-548_cl_sm2.00.img.gz, (1076, 471) - (1121, 516)
[Sat Oct 29 07:50:07 2011] Writing fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src4.gif
[Sat Oct 29 07:52:47 2011] ../../acisf09895/products/events/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src4_src.evt and ../../acisf09895/products/events/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sat Oct 29 07:52:47 2011] Size of ../../acisf09895/products/events/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src4_src.evt.gz[events] = 50 counts
[Sat Oct 29 07:52:47 2011] Mean chipx,y = (255.74, 154.98)
[Sat Oct 29 07:52:47 2011] Mean tdetx,y = (4172.74, 1856.98)
[Sat Oct 29 07:52:47 2011] chipx,y range = (236.00-274.00, 139.00-174.00)
[Sat Oct 29 07:52:47 2011] Size of ../../acisf09895/products/events/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 7 counts
[Sat Oct 29 07:52:47 2011] ../../acisf09895/products/images/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src4_src.img and ../../acisf09895/products/images/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Sat Oct 29 07:52:47 2011] Not generating rmf since there are only 24 counts
[Sat Oct 29 07:52:47 2011] arf not found, will run specextract
[Sat Oct 29 07:52:55 2011] ../../acisf09895/products/spectra/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src4.warf not found
[Sat Oct 29 07:52:55 2011] ../../acisf09895/products/spectra/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src4.wrmf not found
[Sat Oct 29 07:52:55 2011] Removal of ../../acisf09895/products/spectra/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src4.soff failed
[Sat Oct 29 07:53:01 2011] ../../acisf09895/products/lightcurves/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src4_src.lc and ../../acisf09895/products/lightcurves/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sat Oct 29 07:55:00 2011] Spectrum 4 has only 25 counts, deleting rmf
[Sat Oct 29 07:55:00 2011] 218.144
[Sat Oct 29 07:55:03 2011] Updating aperture counts using extracted products
[Sat Oct 29 07:55:03 2011] Error reading totcts from fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src4_src.pi.gz
[Sat Oct 29 07:55:03 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 07:55:03 2011] Using photon index=1.80, rate=0.000804, arf fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src4.arf
[Sat Oct 29 07:55:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 07:55:03 2011] Updating source flux to 6.7e-15
[Sat Oct 29 07:55:15 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting