[Sat Oct 29 07:36:05 2011] Detection parameters:
  Position = (1088.9, 484.8) = 14 26 56.18 33 13 15.2
  Extent = 0.8" x 0.5", rotation angle = 4 degrees
  Source counts = 84.5 +/- 9.4
  Background counts = 3.5
  Rate = 0.003 +/- 0.0003

[Sat Oct 29 07:36:07 2011] Off-axis axis estimate = 2.89'
[Sat Oct 29 07:36:54 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 07:36:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 07:36:54 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Sat Oct 29 07:36:54 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.840
[Sat Oct 29 07:36:54 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.56"
[Sat Oct 29 07:36:55 2011] fullrun_ccd7_acisf09895_pi14-548_cl_pass0_src2.ximg exists
[Sat Oct 29 07:36:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09895_pi14-548_cl_pass0_src2.csv
[Sat Oct 29 07:36:55 2011] fullrun_ccd7_acisf09895_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Oct 29 07:36:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09895_pi14-548_cl_pass0_src2.csv
[Sat Oct 29 07:36:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09895_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09895_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 07:36:55 2011] fullrun_ccd7_acisf09895_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Oct 29 07:36:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09895_pi14-548_cl_pass0_tfrozen_src2.csv
[Sat Oct 29 07:36:55 2011] fullrun_ccd7_acisf09895_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Oct 29 07:36:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09895_pi14-548_cl_pass0_tfrozen_src2.csv
[Sat Oct 29 07:36:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09895_pi14-548_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09895_pi14-548_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 07:37:04 2011] Spatial fit model total counts = 84.263700, observed total counts = 102.000000
[Sat Oct 29 07:37:04 2011] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Oct 29 07:37:04 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 07:37:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 07:37:04 2011] Assessing source extent using major
[Sat Oct 29 07:37:04 2011] Source does appear to be extended
[Sat Oct 29 07:37:04 2011] Computing asymmetry using major and minor axis, asym = 1.52
[Sat Oct 29 07:37:04 2011] Source is asymmetric
[Sat Oct 29 07:37:22 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 07:37:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 07:37:22 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Sat Oct 29 07:37:22 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.840
[Sat Oct 29 07:37:22 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.56"
[Sat Oct 29 07:37:23 2011] fullrun_ccd7_acisf09895_pi14-548_cl_pass1_src2.ximg exists
[Sat Oct 29 07:37:23 2011] fullrun_ccd7_acisf09895_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Oct 29 07:37:23 2011] Fit fullrun_ccd7_acisf09895_pi14-548_cl_pass1_src2 appears to have run properly
[Sat Oct 29 07:37:23 2011] fullrun_ccd7_acisf09895_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Oct 29 07:37:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09895_pi14-548_cl_pass1_tfrozen_src2.csv
[Sat Oct 29 07:37:23 2011] fullrun_ccd7_acisf09895_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Oct 29 07:37:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf09895_pi14-548_cl_pass1_tfrozen_src2.csv
[Sat Oct 29 07:37:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf09895_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf09895_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 07:37:32 2011] Spatial fit model total counts = 95.402300, observed total counts = 102.000000
[Sat Oct 29 07:37:32 2011] Offset between fit and detection position for source 3 = 0.730471 pixels
[Sat Oct 29 07:37:32 2011] 96.758100 total counts/ 15.523700 bgd. counts: snr = 20.617802
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.730471 pixels
  Position = (1089.4, 485.3) = 14 26 56.18 33 13 15.2
  Extent = 1.0 (0.8-1.1)" x 0.5 (0.4-0.6)", rotation angle = 356 (343-7) degrees
  Source counts = 81.2 +/- 9.8
  Background counts = 15.5
  Rate = 0.003 +/- 0.0003
[Sat Oct 29 07:37:32 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 07:37:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 07:37:32 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 07:37:32 2011] Source does appear to be extended
[Sat Oct 29 07:37:32 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.36
[Sat Oct 29 07:50:07 2011] Not overwriting source region fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src3_src.reg
[Sat Oct 29 07:50:07 2011] Extracting stamp from image fullrun_ccd7_acisf09895_pi14-548_cl_sm2.00.img.gz, (1046, 442) - (1133, 529)
[Sat Oct 29 07:50:07 2011] Writing fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src3.gif
[Sat Oct 29 07:50:22 2011] ../../acisf09895/products/events/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src3_src.evt and ../../acisf09895/products/events/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Oct 29 07:50:22 2011] Size of ../../acisf09895/products/events/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src3_src.evt.gz[events] = 87 counts
[Sat Oct 29 07:50:22 2011] Mean chipx,y = (267.17, 152.99)
[Sat Oct 29 07:50:22 2011] Mean tdetx,y = (4184.17, 1854.99)
[Sat Oct 29 07:50:22 2011] chipx,y range = (246.00-289.00, 134.00-171.00)
[Sat Oct 29 07:50:22 2011] Size of ../../acisf09895/products/events/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 52 counts
[Sat Oct 29 07:50:22 2011] ../../acisf09895/products/images/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src3_src.img and ../../acisf09895/products/images/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Oct 29 07:50:22 2011] Not generating rmf since there are only 81 counts
[Sat Oct 29 07:50:22 2011] arf not found, will run specextract
[Sat Oct 29 07:50:30 2011] ../../acisf09895/products/spectra/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src3.warf not found
[Sat Oct 29 07:50:30 2011] ../../acisf09895/products/spectra/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src3.wrmf not found
[Sat Oct 29 07:50:30 2011] Removal of ../../acisf09895/products/spectra/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src3.soff failed
[Sat Oct 29 07:50:35 2011] ../../acisf09895/products/lightcurves/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src3_src.lc and ../../acisf09895/products/lightcurves/fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Oct 29 07:55:00 2011] Spectrum 3 has only 81 counts, deleting rmf
[Sat Oct 29 07:55:00 2011] 215.136
[Sat Oct 29 07:55:03 2011] Updating aperture counts using extracted products
[Sat Oct 29 07:55:03 2011] Error reading totcts from fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Oct 29 07:55:03 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 07:55:03 2011] Using photon index=1.80, rate=0.00265, arf fullrun_ccd7_acisf09895_pi14-548_pass1_cl_src3.arf
[Sat Oct 29 07:55:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 07:55:03 2011] Updating source flux to 2.2e-14
[Sat Oct 29 07:55:15 2011] Flag p found in src. 3 procflags, skipping spectral fitting
[Sat Oct 29 07:55:15 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting