[Sat Oct 29 07:36:03 2011] Detection parameters:
  Position = (920.8, 479.9) = 14 26 25.11 33 17 9.7
  Extent = 1.1" x 0.9", rotation angle = 79 degrees
  Source counts = 107.1 +/- 11.1
  Background counts = 15.9
  Rate = 0.003 +/- 0.0004

[Sat Oct 29 07:36:04 2011] Off-axis axis estimate = 7.25'
[Sat Oct 29 07:36:53 2011] Using EEF radius (= 2.33 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 07:36:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 07:36:53 2011] Initial guess for spatial extent in simple fitting = 2.33"
[Sat Oct 29 07:36:53 2011] source mask rpix=4.7, npix_max = 109, mask sum = 100, frac = 0.910
[Sat Oct 29 07:36:53 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 2.33"
[Sat Oct 29 07:36:53 2011] fullrun_ccd6_acisf09895_pi14-548_cl_pass0_src2.ximg exists
[Sat Oct 29 07:36:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09895_pi14-548_cl_pass0_src2.csv
[Sat Oct 29 07:36:53 2011] fullrun_ccd6_acisf09895_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Oct 29 07:36:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09895_pi14-548_cl_pass0_src2.csv
[Sat Oct 29 07:36:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf09895_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf09895_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 07:36:53 2011] fullrun_ccd6_acisf09895_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Oct 29 07:36:53 2011] fullrun_ccd6_acisf09895_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Oct 29 07:36:53 2011] Fit fullrun_ccd6_acisf09895_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Oct 29 07:37:01 2011] Spatial fit model total counts = 136.142000, observed total counts = 133.000000
[Sat Oct 29 07:37:01 2011] Offset between fit and detection position for source 2 = 1.775540 pixels
[Sat Oct 29 07:37:01 2011] 134.857800 total counts/ 41.917600 bgd. counts: snr = 14.355073
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.775540 pixels
  Position = (921.4, 481.5) = 14 26 25.10 33 17 10.2
  Extent = 2.4 (1.8-3.0)", rotation angle = 0
  Source counts = 92.9 +/- 11.6
  Background counts = 41.9
  Rate = 0.003 +/- 0.0004
[Sat Oct 29 07:37:01 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 07:37:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 07:37:01 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 07:37:01 2011] Source does appear to be extended
[Sat Oct 29 07:37:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 07:37:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 07:37:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 07:37:21 2011] Initial guess for spatial extent in simple fitting = 2.43"
[Sat Oct 29 07:37:21 2011] source mask rpix=4.9, npix_max = 118, mask sum = 119, frac = 1.005
[Sat Oct 29 07:37:21 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 2.43"
[Sat Oct 29 07:37:22 2011] fullrun_ccd6_acisf09895_pi14-548_cl_pass1_src2.ximg exists
[Sat Oct 29 07:37:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09895_pi14-548_cl_pass1_src2.csv
[Sat Oct 29 07:37:22 2011] fullrun_ccd6_acisf09895_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Oct 29 07:37:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09895_pi14-548_cl_pass1_src2.csv
[Sat Oct 29 07:37:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf09895_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf09895_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 07:37:22 2011] fullrun_ccd6_acisf09895_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Oct 29 07:37:22 2011] fullrun_ccd6_acisf09895_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Oct 29 07:37:22 2011] Fit fullrun_ccd6_acisf09895_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Oct 29 07:37:29 2011] Spatial fit model total counts = 134.302000, observed total counts = 132.000000
[Sat Oct 29 07:37:29 2011] Offset between fit and detection position for source 2 = 0.398946 pixels
[Sat Oct 29 07:37:29 2011] 132.936900 total counts/ 29.010900 bgd. counts: snr = 19.294948
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.398946 pixels
  Position = (921.8, 481.4) = 14 26 25.09 33 17 10.2
  Extent = 2.6 (1.9-3.4)", rotation angle = 0
  Source counts = 103.9 +/- 11.5
  Background counts = 29.0
  Rate = 0.003 +/- 0.0004
[Sat Oct 29 07:37:29 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 07:37:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 07:37:29 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 07:37:29 2011] Source does appear to be extended
[Sat Oct 29 07:37:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 07:42:37 2011] Not overwriting source region fullrun_ccd6_acisf09895_pi14-548_pass1_cl_src2_src.reg
[Sat Oct 29 07:42:37 2011] Extracting stamp from image fullrun_ccd6_acisf09895_pi14-548_cl_sm2.00.img.gz, (804, 364) - (1039, 599)
[Sat Oct 29 07:42:37 2011] Writing fullrun_ccd6_acisf09895_pi14-548_pass1_cl_src2.gif
[Sat Oct 29 07:43:13 2011] ../../acisf09895/products/events/fullrun_ccd6_acisf09895_pi14-548_pass1_cl_src2_src.evt and ../../acisf09895/products/events/fullrun_ccd6_acisf09895_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct 29 07:43:13 2011] Size of ../../acisf09895/products/events/fullrun_ccd6_acisf09895_pi14-548_pass1_cl_src2_src.evt.gz[events] = 147 counts
[Sat Oct 29 07:43:13 2011] Mean chipx,y = (389.46, 216.94)
[Sat Oct 29 07:43:13 2011] Mean tdetx,y = (3264.46, 1918.94)
[Sat Oct 29 07:43:13 2011] chipx,y range = (354.00-416.00, 191.00-250.00)
[Sat Oct 29 07:43:13 2011] Size of ../../acisf09895/products/events/fullrun_ccd6_acisf09895_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 160 counts
[Sat Oct 29 07:43:13 2011] ../../acisf09895/products/images/fullrun_ccd6_acisf09895_pi14-548_pass1_cl_src2_src.img and ../../acisf09895/products/images/fullrun_ccd6_acisf09895_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct 29 07:43:13 2011] rmf not found, will run specextract
[Sat Oct 29 07:43:13 2011] arf not found, will run specextract
[Sat Oct 29 07:43:39 2011] ../../acisf09895/products/spectra/fullrun_ccd6_acisf09895_pi14-548_pass1_cl_src2.warf not found
[Sat Oct 29 07:43:39 2011] ../../acisf09895/products/spectra/fullrun_ccd6_acisf09895_pi14-548_pass1_cl_src2.wrmf not found
[Sat Oct 29 07:43:39 2011] Removal of ../../acisf09895/products/spectra/fullrun_ccd6_acisf09895_pi14-548_pass1_cl_src2.soff failed
[Sat Oct 29 07:43:45 2011] ../../acisf09895/products/lightcurves/fullrun_ccd6_acisf09895_pi14-548_pass1_cl_src2_src.lc and ../../acisf09895/products/lightcurves/fullrun_ccd6_acisf09895_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct 29 07:50:07 2011] Keeping rmf generated by specextract
[Sat Oct 29 07:50:07 2011] 167.903
[Sat Oct 29 07:55:02 2011] Updating aperture counts using extracted products
[Sat Oct 29 07:55:02 2011] Error reading totcts from fullrun_ccd6_acisf09895_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct 29 07:55:03 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 07:55:03 2011] Using photon index=1.80, rate=0.00339, arf fullrun_ccd6_acisf09895_pi14-548_pass1_cl_src2.arf
[Sat Oct 29 07:55:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 07:55:03 2011] Updating source flux to 4.4e-14