[Sun Oct 16 09:37:21 2011] Detection parameters:
  Position = (1058.2, 979.1) = 17 51 25.05 -29 27 49.0
  Extent = 1.3" x 1.1", rotation angle = 59 degrees
  Source counts = 36.6 +/- 6.7
  Background counts = 8.4
  Rate = 0.0009 +/- 0.0002

[Sun Oct 16 09:37:24 2011] Off-axis axis estimate = 7.92'
[Sun Oct 16 09:38:57 2011] Using EEF radius (= 2.77 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 09:38:57 2011] Initial guess for spatial extent in simple fitting = 2.77"
[Sun Oct 16 09:38:57 2011] source mask rpix=5.6, npix_max = 150, mask sum = 144, frac = 0.955
[Sun Oct 16 09:38:57 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 2.77"
[Sun Oct 16 09:39:00 2011] fullrun_ccd3_acisf09893_pi14-548_cl_pass0_src11.ximg exists
[Sun Oct 16 09:39:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09893_pi14-548_cl_pass0_src11.csv
[Sun Oct 16 09:39:00 2011] fullrun_ccd3_acisf09893_pi14-548_cl_pass0_src11_1.ximg exists
[Sun Oct 16 09:39:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09893_pi14-548_cl_pass0_src11.csv
[Sun Oct 16 09:39:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09893_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09893_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 09:39:00 2011] fullrun_ccd3_acisf09893_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sun Oct 16 09:39:00 2011] fullrun_ccd3_acisf09893_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Oct 16 09:39:00 2011] Fit fullrun_ccd3_acisf09893_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Oct 16 09:39:23 2011] Spatial fit model total counts = 59.909400, observed total counts = 60.000000
[Sun Oct 16 09:39:23 2011] Offset between fit and detection position for source 12 = 1.211279 pixels
[Sun Oct 16 09:39:23 2011] 60.233600 total counts/ 18.053900 bgd. counts: snr = 9.926999
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.211279 pixels
  Position = (1058.6, 980.2) = 17 51 25.06 -29 27 48.7
  Extent = 2.3 (1.6-3.2)", rotation angle = 0
  Source counts = 42.2 +/- 7.8
  Background counts = 18.1
  Rate = 0.001 +/- 0.0002
[Sun Oct 16 09:39:23 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 09:39:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 09:39:23 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 09:39:23 2011] Source does appear to be extended
[Sun Oct 16 09:39:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 09:39:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 09:39:57 2011] Initial guess for spatial extent in simple fitting = 2.33"
[Sun Oct 16 09:39:57 2011] source mask rpix=4.7, npix_max = 109, mask sum = 110, frac = 1.004
[Sun Oct 16 09:39:57 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 2.33"
[Sun Oct 16 09:39:57 2011] fullrun_ccd3_acisf09893_pi14-548_cl_pass1_src11.ximg exists
[Sun Oct 16 09:39:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09893_pi14-548_cl_pass1_src11.csv
[Sun Oct 16 09:39:57 2011] fullrun_ccd3_acisf09893_pi14-548_cl_pass1_src11_1.ximg exists
[Sun Oct 16 09:39:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09893_pi14-548_cl_pass1_src11.csv
[Sun Oct 16 09:39:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09893_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09893_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 09:39:58 2011] fullrun_ccd3_acisf09893_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sun Oct 16 09:39:58 2011] fullrun_ccd3_acisf09893_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Oct 16 09:39:58 2011] Fit fullrun_ccd3_acisf09893_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Oct 16 09:40:16 2011] Spatial fit model total counts = 54.061200, observed total counts = 54.000000
[Sun Oct 16 09:40:16 2011] Offset between fit and detection position for source 12 = 0.288951 pixels
[Sun Oct 16 09:40:16 2011] 54.495600 total counts/ 13.259500 bgd. counts: snr = 11.324369
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.288951 pixels
  Position = (1058.5, 979.9) = 17 51 25.06 -29 27 48.8
  Extent = 2.3 (1.5-3.4)", rotation angle = 0
  Source counts = 41.2 +/- 7.4
  Background counts = 13.3
  Rate = 0.001 +/- 0.0002
[Sun Oct 16 09:40:16 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 09:40:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 09:40:16 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 09:40:16 2011] Source does appear to be extended
[Sun Oct 16 09:40:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 09:44:34 2011] Not overwriting source region fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src12_src.reg
[Sun Oct 16 09:44:34 2011] Extracting stamp from image fullrun_ccd3_acisf09893_pi14-548_cl_sm2.00.img.gz, (954, 875) - (1127, 1084)
[Sun Oct 16 09:44:34 2011] Writing fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src12.gif
[Sun Oct 16 09:45:07 2011] ../../acisf09893/products/events/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src12_src.evt and ../../acisf09893/products/events/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Sun Oct 16 09:45:07 2011] Size of ../../acisf09893/products/events/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src12_src.evt.gz[events] = 61 counts
[Sun Oct 16 09:45:07 2011] Mean chipx,y = (973.36, 51.20)
[Sun Oct 16 09:45:07 2011] Mean tdetx,y = (5080.80, 4034.36)
[Sun Oct 16 09:45:07 2011] chipx,y range = (947.00-997.00, 27.00-75.00)
[Sun Oct 16 09:45:07 2011] Size of ../../acisf09893/products/events/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 179 counts
[Sun Oct 16 09:45:07 2011] ../../acisf09893/products/images/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src12_src.img and ../../acisf09893/products/images/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Sun Oct 16 09:45:07 2011] ../../acisf09893/products/spectra/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src12_src.pi and ../../acisf09893/products/spectra/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Sun Oct 16 09:45:07 2011] Not generating rmf since there are only 41 counts
[Sun Oct 16 09:45:09 2011] ../../acisf09893/products/lightcurves/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src12_src.lc and ../../acisf09893/products/lightcurves/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Sun Oct 16 09:46:34 2011] 174.603
[Sun Oct 16 09:46:50 2011] Updating aperture counts using extracted products
[Sun Oct 16 09:46:50 2011] Error reading totcts from fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src12_src.pi.gz
[Sun Oct 16 09:46:51 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 09:46:51 2011] Using photon index=1.80, rate=0.000978, arf fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src12.arf
[Sun Oct 16 09:46:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 09:46:51 2011] Updating source flux to 1.5e-14
[Sun Oct 16 09:47:20 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting