[Sun Oct 16 09:37:20 2011] Detection parameters: Position = (272.3, 944.7) = 17 51 54.66 -29 28 5.8 Extent = 2.8" x 2.2", rotation angle = 53 degrees Source counts = 204.4 +/- 15.6 Background counts = 37.6 Rate = 0.005 +/- 0.0004 [Sun Oct 16 09:37:24 2011] Off-axis axis estimate = 9.42' [Sun Oct 16 09:38:57 2011] Using EEF radius (= 3.93 ")to estimate initial spatial extent for simple fitting [Sun Oct 16 09:38:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Oct 16 09:38:57 2011] Initial guess for spatial extent in simple fitting = 3.93" [Sun Oct 16 09:38:57 2011] source mask rpix=8.0, npix_max = 287, mask sum = 280, frac = 0.973 [Sun Oct 16 09:38:57 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.93" [Sun Oct 16 09:38:59 2011] fullrun_ccd3_acisf09893_pi14-548_cl_pass0_src1.ximg exists [Sun Oct 16 09:38:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09893_pi14-548_cl_pass0_src1.csv [Sun Oct 16 09:38:59 2011] fullrun_ccd3_acisf09893_pi14-548_cl_pass0_src1_1.ximg exists [Sun Oct 16 09:38:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09893_pi14-548_cl_pass0_src1.csv [Sun Oct 16 09:38:59 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf09893_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf09893_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Oct 16 09:39:00 2011] fullrun_ccd3_acisf09893_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Sun Oct 16 09:39:00 2011] fullrun_ccd3_acisf09893_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Sun Oct 16 09:39:00 2011] Fit fullrun_ccd3_acisf09893_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Sun Oct 16 09:39:23 2011] Spatial fit model total counts = 330.937000, observed total counts = 329.000000 [Sun Oct 16 09:39:23 2011] Offset between fit and detection position for source 1 = 0.838857 pixels [Sun Oct 16 09:39:23 2011] 330.840000 total counts/ 109.594000 bgd. counts: snr = 21.134016 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.838857 pixels Position = (271.7, 945.2) = 17 51 54.70 -29 28 5.8 Extent = 3.0 (2.8-3.4)", rotation angle = 0 Source counts = 221.2 +/- 18.2 Background counts = 109.6 Rate = 0.005 +/- 0.0004 [Sun Oct 16 09:39:23 2011] Vigneting correction estimate = 1.000000 [Sun Oct 16 09:39:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Oct 16 09:39:23 2011] Assessing source extent using major axis lower bound [Sun Oct 16 09:39:23 2011] Source does appear to be extended [Sun Oct 16 09:39:23 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Oct 16 09:39:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Sun Oct 16 09:39:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Oct 16 09:39:57 2011] Initial guess for spatial extent in simple fitting = 3.05" [Sun Oct 16 09:39:57 2011] source mask rpix=6.2, npix_max = 179, mask sum = 169, frac = 0.943 [Sun Oct 16 09:39:57 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.05" [Sun Oct 16 09:39:57 2011] fullrun_ccd3_acisf09893_pi14-548_cl_pass1_src1.ximg exists [Sun Oct 16 09:39:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09893_pi14-548_cl_pass1_src1.csv [Sun Oct 16 09:39:57 2011] fullrun_ccd3_acisf09893_pi14-548_cl_pass1_src1_1.ximg exists [Sun Oct 16 09:39:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09893_pi14-548_cl_pass1_src1.csv [Sun Oct 16 09:39:57 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf09893_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf09893_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Oct 16 09:39:58 2011] fullrun_ccd3_acisf09893_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Sun Oct 16 09:39:58 2011] fullrun_ccd3_acisf09893_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Sun Oct 16 09:39:58 2011] Fit fullrun_ccd3_acisf09893_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Sun Oct 16 09:40:16 2011] Spatial fit model total counts = 284.763000, observed total counts = 283.000000 [Sun Oct 16 09:40:16 2011] Offset between fit and detection position for source 1 = 0.234566 pixels [Sun Oct 16 09:40:16 2011] 285.106200 total counts/ 58.374200 bgd. counts: snr = 29.675794 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.234566 pixels Position = (271.4, 945.2) = 17 51 54.71 -29 28 5.8 Extent = 3.1 (2.8-3.5)", rotation angle = 0 Source counts = 226.7 +/- 16.9 Background counts = 58.4 Rate = 0.005 +/- 0.0004 [Sun Oct 16 09:40:16 2011] Vigneting correction estimate = 1.000000 [Sun Oct 16 09:40:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Oct 16 09:40:16 2011] Assessing source extent using major axis lower bound [Sun Oct 16 09:40:16 2011] Source does appear to be extended [Sun Oct 16 09:40:16 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Oct 16 09:44:33 2011] Not overwriting source region fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src1_src.reg [Sun Oct 16 09:44:33 2011] Extracting stamp from image fullrun_ccd3_acisf09893_pi14-548_cl_sm2.00.img.gz, (128, 802) - (414, 1088) [Sun Oct 16 09:44:33 2011] Writing fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src1.gif [Sun Oct 16 09:44:36 2011] ../../acisf09893/products/events/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src1_src.evt and ../../acisf09893/products/events/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create [Sun Oct 16 09:44:36 2011] Size of ../../acisf09893/products/events/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src1_src.evt.gz[events] = 272 counts [Sun Oct 16 09:44:36 2011] Mean chipx,y = (189.18, 160.96) [Sun Oct 16 09:44:36 2011] Mean tdetx,y = (4971.04, 3250.18) [Sun Oct 16 09:44:36 2011] chipx,y range = (152.00-228.00, 122.00-195.00) [Sun Oct 16 09:44:36 2011] Size of ../../acisf09893/products/events/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 467 counts [Sun Oct 16 09:44:36 2011] ../../acisf09893/products/images/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src1_src.img and ../../acisf09893/products/images/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create [Sun Oct 16 09:44:36 2011] ../../acisf09893/products/spectra/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src1_src.pi and ../../acisf09893/products/spectra/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create [Sun Oct 16 09:44:38 2011] ../../acisf09893/products/lightcurves/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src1_src.lc and ../../acisf09893/products/lightcurves/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create [Sun Oct 16 09:46:34 2011] Keeping rmf generated by specextract [Sun Oct 16 09:46:34 2011] 157.123 [Sun Oct 16 09:46:50 2011] Updating aperture counts using extracted products [Sun Oct 16 09:46:50 2011] Error reading totcts from fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src1_src.pi.gz [Sun Oct 16 09:46:50 2011] Calculating source flux in energy range 0.30-8.00 [Sun Oct 16 09:46:50 2011] Using photon index=1.80, rate=0.00538, arf fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src1.arf [Sun Oct 16 09:46:50 2011] Assuming count rate is from the 0.20-8.00 bandpass [Sun Oct 16 09:46:50 2011] Updating source flux to 8.9e-14 [Sun Oct 16 09:47:31 2011] Reading fit data from acisf09893/analysis//spectral/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src1_pl.csv [Sun Oct 16 09:47:31 2011] Spectral fit parameter nH value = 2.68964e+22 [Sun Oct 16 09:47:31 2011] Spectral fit parameter PhoIndex value = 2.24363 [Sun Oct 16 09:47:31 2011] Failed to get F(0.3-8.0) from acisf09893/analysis//spectral/fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Sun Oct 16 09:47:31 2011] Calculating source flux in energy range 0.30-8.00 [Sun Oct 16 09:47:31 2011] Using Nh = 2.7e+22, photon index=2.24, rate=0.00538, arf fullrun_ccd3_acisf09893_pi14-548_pass1_cl_src1.arf [Sun Oct 16 09:47:31 2011] Assuming count rate is from the 0.20-8.00 bandpass [Sun Oct 16 09:47:31 2011] Updating source flux to 1.1e-13