[Sun Oct 16 09:37:14 2011] Detection parameters:
  Position = (382.3, 591.2) = 17 51 11.51 -29 31 48.5
  Extent = 0.5" x 0.5", rotation angle = 143 degrees
  Source counts = 15.0 +/- 4.1
  Background counts = 2.0
  Rate = 0.0004 +/- 0.0001

[Sun Oct 16 09:37:16 2011] Off-axis axis estimate = 5.44'
[Sun Oct 16 09:38:52 2011] Using EEF radius (= 1.36 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 09:38:52 2011] Initial guess for spatial extent in simple fitting = 1.36"
[Sun Oct 16 09:38:52 2011] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.841
[Sun Oct 16 09:38:52 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 1.36"
[Sun Oct 16 09:38:53 2011] fullrun_ccd1_acisf09893_pi14-548_cl_pass0_src16.ximg exists
[Sun Oct 16 09:38:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09893_pi14-548_cl_pass0_src16.csv
[Sun Oct 16 09:38:53 2011] fullrun_ccd1_acisf09893_pi14-548_cl_pass0_src16_1.ximg exists
[Sun Oct 16 09:38:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09893_pi14-548_cl_pass0_src16.csv
[Sun Oct 16 09:38:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf09893_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf09893_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 09:38:54 2011] fullrun_ccd1_acisf09893_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Sun Oct 16 09:38:54 2011] fullrun_ccd1_acisf09893_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Oct 16 09:38:54 2011] Fit fullrun_ccd1_acisf09893_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Sun Oct 16 09:39:15 2011] Spatial fit model total counts = 25.381100, observed total counts = 26.000000
[Sun Oct 16 09:39:15 2011] Offset between fit and detection position for source 10 = 1.156483 pixels
[Sun Oct 16 09:39:15 2011] 25.138530 total counts/ 6.258330 bgd. counts: snr = 7.547052
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.156483 pixels
  Position = (383.2, 591.9) = 17 51 11.50 -29 31 48.4
  Extent = 0.9 (0.5-1.1)", rotation angle = 0
  Source counts = 18.9 +/- 5.0
  Background counts = 6.3
  Rate = 0.0004 +/- 0.0001
[Sun Oct 16 09:39:15 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 09:39:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 09:39:15 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 09:39:15 2011] Source does appear to be extended
[Sun Oct 16 09:39:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 09:39:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 09:39:48 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Sun Oct 16 09:39:48 2011] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.585
[Sun Oct 16 09:39:48 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.87"
[Sun Oct 16 09:39:49 2011] fullrun_ccd1_acisf09893_pi14-548_cl_pass1_src15.ximg exists
[Sun Oct 16 09:39:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09893_pi14-548_cl_pass1_src15.csv
[Sun Oct 16 09:39:49 2011] fullrun_ccd1_acisf09893_pi14-548_cl_pass1_src15_1.ximg exists
[Sun Oct 16 09:39:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf09893_pi14-548_cl_pass1_src15.csv
[Sun Oct 16 09:39:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf09893_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf09893_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 09:39:49 2011] fullrun_ccd1_acisf09893_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Sun Oct 16 09:39:49 2011] fullrun_ccd1_acisf09893_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Oct 16 09:39:49 2011] Fit fullrun_ccd1_acisf09893_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Oct 16 09:40:08 2011] Spatial fit model total counts = 23.217200, observed total counts = 24.000000
[Sun Oct 16 09:40:08 2011] Offset between fit and detection position for source 10 = 0.068174 pixels
[Sun Oct 16 09:40:08 2011] 22.918350 total counts/ 3.427550 bgd. counts: snr = 10.527803
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.068174 pixels
  Position = (383.2, 592.0) = 17 51 11.50 -29 31 48.4
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source counts = 19.5 +/- 4.8
  Background counts = 3.4
  Rate = 0.0005 +/- 0.0001
[Sun Oct 16 09:40:08 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 09:40:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 09:40:08 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 09:40:08 2011] Source does appear to be extended
[Sun Oct 16 09:40:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 09:41:30 2011] Not overwriting source region fullrun_ccd1_acisf09893_pi14-548_pass1_cl_src10_src.reg
[Sun Oct 16 09:41:30 2011] Extracting stamp from image fullrun_ccd1_acisf09893_pi14-548_cl_sm2.00.img.gz, (343, 551) - (424, 632)
[Sun Oct 16 09:41:30 2011] Writing fullrun_ccd1_acisf09893_pi14-548_pass1_cl_src10.gif
[Sun Oct 16 09:42:11 2011] ../../acisf09893/products/events/fullrun_ccd1_acisf09893_pi14-548_pass1_cl_src10_src.evt and ../../acisf09893/products/events/fullrun_ccd1_acisf09893_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sun Oct 16 09:42:11 2011] Size of ../../acisf09893/products/events/fullrun_ccd1_acisf09893_pi14-548_pass1_cl_src10_src.evt.gz[events] = 23 counts
[Sun Oct 16 09:42:11 2011] Mean chipx,y = (324.43, 504.13)
[Sun Oct 16 09:42:11 2011] Mean tdetx,y = (4627.87, 4431.43)
[Sun Oct 16 09:42:11 2011] chipx,y range = (309.00-347.00, 492.00-528.00)
[Sun Oct 16 09:42:11 2011] Size of ../../acisf09893/products/events/fullrun_ccd1_acisf09893_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 58 counts
[Sun Oct 16 09:42:11 2011] ../../acisf09893/products/images/fullrun_ccd1_acisf09893_pi14-548_pass1_cl_src10_src.img and ../../acisf09893/products/images/fullrun_ccd1_acisf09893_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Sun Oct 16 09:42:11 2011] ../../acisf09893/products/spectra/fullrun_ccd1_acisf09893_pi14-548_pass1_cl_src10_src.pi and ../../acisf09893/products/spectra/fullrun_ccd1_acisf09893_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sun Oct 16 09:42:11 2011] Not generating rmf since there are only 19 counts
[Sun Oct 16 09:42:14 2011] ../../acisf09893/products/lightcurves/fullrun_ccd1_acisf09893_pi14-548_pass1_cl_src10_src.lc and ../../acisf09893/products/lightcurves/fullrun_ccd1_acisf09893_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sun Oct 16 09:42:58 2011] 186.8
[Sun Oct 16 09:46:49 2011] Updating aperture counts using extracted products
[Sun Oct 16 09:46:49 2011] Error reading totcts from fullrun_ccd1_acisf09893_pi14-548_pass1_cl_src10_src.pi.gz
[Sun Oct 16 09:46:49 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 09:46:49 2011] Using photon index=1.80, rate=0.000462, arf fullrun_ccd1_acisf09893_pi14-548_pass1_cl_src10.arf
[Sun Oct 16 09:46:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 09:46:49 2011] Updating source flux to 6.7e-15
[Sun Oct 16 09:47:05 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting