[Sun Oct 16 09:37:12 2011] Detection parameters:
  Position = (300.5, 633.1) = 17 51 18.16 -29 39 56.7
  Extent = 0.8" x 0.5", rotation angle = 111 degrees
  Source counts = 17.6 +/- 4.5
  Background counts = 2.4
  Rate = 0.0004 +/- 0.0001

[Sun Oct 16 09:37:13 2011] Off-axis axis estimate = 4.86'
[Sun Oct 16 09:38:50 2011] Using EEF radius (= 1.13 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 09:38:50 2011] Initial guess for spatial extent in simple fitting = 1.13"
[Sun Oct 16 09:38:50 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.963
[Sun Oct 16 09:38:50 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 1.13"
[Sun Oct 16 09:38:51 2011] fullrun_ccd0_acisf09893_pi14-548_cl_pass0_src9.ximg exists
[Sun Oct 16 09:38:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09893_pi14-548_cl_pass0_src9.csv
[Sun Oct 16 09:38:51 2011] fullrun_ccd0_acisf09893_pi14-548_cl_pass0_src9_1.ximg exists
[Sun Oct 16 09:38:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09893_pi14-548_cl_pass0_src9.csv
[Sun Oct 16 09:38:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09893_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09893_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 09:38:52 2011] fullrun_ccd0_acisf09893_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sun Oct 16 09:38:52 2011] fullrun_ccd0_acisf09893_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Oct 16 09:38:52 2011] Fit fullrun_ccd0_acisf09893_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Oct 16 09:39:12 2011] Spatial fit model total counts = 21.651300, observed total counts = 23.000000
[Sun Oct 16 09:39:12 2011] Offset between fit and detection position for source 12 = 0.673686 pixels
[Sun Oct 16 09:39:12 2011] 21.129135 total counts/ 0.030235 bgd. counts: snr = 121.340836
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.673686 pixels
  Position = (301.1, 633.4) = 17 51 18.16 -29 39 56.8
  Extent = 1.0 (0.7-1.3)", rotation angle = 0
  Source counts = 21.1 +/- 4.6
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Sun Oct 16 09:39:12 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 09:39:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 09:39:12 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 09:39:12 2011] Source does appear to be extended
[Sun Oct 16 09:39:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 09:39:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 09:39:46 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Sun Oct 16 09:39:46 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.036
[Sun Oct 16 09:39:46 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.96"
[Sun Oct 16 09:39:46 2011] fullrun_ccd0_acisf09893_pi14-548_cl_pass1_src9.ximg exists
[Sun Oct 16 09:39:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09893_pi14-548_cl_pass1_src9.csv
[Sun Oct 16 09:39:46 2011] fullrun_ccd0_acisf09893_pi14-548_cl_pass1_src9_1.ximg exists
[Sun Oct 16 09:39:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09893_pi14-548_cl_pass1_src9.csv
[Sun Oct 16 09:39:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09893_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09893_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 09:39:47 2011] fullrun_ccd0_acisf09893_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sun Oct 16 09:39:47 2011] fullrun_ccd0_acisf09893_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Oct 16 09:39:47 2011] Fit fullrun_ccd0_acisf09893_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Oct 16 09:40:05 2011] Spatial fit model total counts = 23.827700, observed total counts = 24.000000
[Sun Oct 16 09:40:05 2011] Offset between fit and detection position for source 12 = 0.340453 pixels
[Sun Oct 16 09:40:05 2011] 23.544740 total counts/ 5.469640 bgd. counts: snr = 7.728609
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.340453 pixels
  Position = (301.0, 633.7) = 17 51 18.16 -29 39 56.6
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source counts = 18.1 +/- 4.9
  Background counts = 5.5
  Rate = 0.0004 +/- 0.0001
[Sun Oct 16 09:40:05 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 09:40:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 09:40:05 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 09:40:05 2011] Source does appear to be extended
[Sun Oct 16 09:40:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 09:40:40 2011] Not overwriting source region fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src12_src.reg
[Sun Oct 16 09:40:40 2011] Extracting stamp from image fullrun_ccd0_acisf09893_pi14-548_cl_sm2.00.img.gz, (261, 593) - (341, 674)
[Sun Oct 16 09:40:40 2011] Writing fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src12.gif
[Sun Oct 16 09:41:04 2011] ../../acisf09893/products/events/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src12_src.evt and ../../acisf09893/products/events/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Sun Oct 16 09:41:04 2011] Size of ../../acisf09893/products/events/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src12_src.evt.gz[events] = 22 counts
[Sun Oct 16 09:41:04 2011] Mean chipx,y = (786.64, 554.50)
[Sun Oct 16 09:41:04 2011] Mean tdetx,y = (3615.50, 4345.36)
[Sun Oct 16 09:41:04 2011] chipx,y range = (766.00-802.00, 536.00-575.00)
[Sun Oct 16 09:41:04 2011] Size of ../../acisf09893/products/events/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 46 counts
[Sun Oct 16 09:41:04 2011] ../../acisf09893/products/images/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src12_src.img and ../../acisf09893/products/images/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Sun Oct 16 09:41:04 2011] ../../acisf09893/products/spectra/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src12_src.pi and ../../acisf09893/products/spectra/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Sun Oct 16 09:41:04 2011] Not generating rmf since there are only 18 counts
[Sun Oct 16 09:41:07 2011] ../../acisf09893/products/lightcurves/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src12_src.lc and ../../acisf09893/products/lightcurves/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Sun Oct 16 09:41:30 2011] 172.601
[Sun Oct 16 09:46:48 2011] Updating aperture counts using extracted products
[Sun Oct 16 09:46:48 2011] Error reading totcts from fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src12_src.pi.gz
[Sun Oct 16 09:46:49 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 09:46:49 2011] Using photon index=1.80, rate=0.000429, arf fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src12.arf
[Sun Oct 16 09:46:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 09:46:49 2011] Updating source flux to 6.7e-15
[Sun Oct 16 09:46:57 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting