[Sun Oct 16 09:37:12 2011] Detection parameters:
  Position = (934.9, 202.3) = 17 50 54.20 -29 43 28.3
  Extent = 3.6" x 2.9", rotation angle = 40 degrees
  Source counts = 76.5 +/- 10.2
  Background counts = 28.5
  Rate = 0.002 +/- 0.0002

[Sun Oct 16 09:37:13 2011] Off-axis axis estimate = 10.85'
[Sun Oct 16 09:38:50 2011] Using EEF radius (= 5.23 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 09:38:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 16 09:38:50 2011] Initial guess for spatial extent in simple fitting = 5.23"
[Sun Oct 16 09:38:50 2011] source mask rpix=10.6, npix_max = 496, mask sum = 484, frac = 0.975
[Sun Oct 16 09:38:50 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 5.23"
[Sun Oct 16 09:38:51 2011] fullrun_ccd0_acisf09893_pi14-548_cl_pass0_src8.ximg exists
[Sun Oct 16 09:38:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09893_pi14-548_cl_pass0_src8.csv
[Sun Oct 16 09:38:51 2011] fullrun_ccd0_acisf09893_pi14-548_cl_pass0_src8_1.ximg exists
[Sun Oct 16 09:38:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09893_pi14-548_cl_pass0_src8.csv
[Sun Oct 16 09:38:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09893_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09893_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 09:38:52 2011] fullrun_ccd0_acisf09893_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Sun Oct 16 09:38:52 2011] fullrun_ccd0_acisf09893_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Oct 16 09:38:52 2011] Fit fullrun_ccd0_acisf09893_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Sun Oct 16 09:39:12 2011] Spatial fit model total counts = 209.221000, observed total counts = 207.000000
[Sun Oct 16 09:39:12 2011] Offset between fit and detection position for source 11 = 3.210989 pixels
[Sun Oct 16 09:39:12 2011] 209.910900 total counts/ 98.430900 bgd. counts: snr = 11.236505
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 3.210989 pixels
  Position = (933.5, 205.2) = 17 50 54.27 -29 43 27.2
  Extent = 5.1 (3.7-6.3)", rotation angle = 0
  Source counts = 111.5 +/- 14.5
  Background counts = 98.4
  Rate = 0.003 +/- 0.0003
[Sun Oct 16 09:39:12 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 09:39:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 09:39:12 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 09:39:12 2011] Source does appear to be extended
[Sun Oct 16 09:39:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 09:39:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 09:39:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 16 09:39:46 2011] Initial guess for spatial extent in simple fitting = 5.07"
[Sun Oct 16 09:39:46 2011] source mask rpix=10.3, npix_max = 467, mask sum = 462, frac = 0.989
[Sun Oct 16 09:39:46 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 5.07"
[Sun Oct 16 09:39:46 2011] fullrun_ccd0_acisf09893_pi14-548_cl_pass1_src8.ximg exists
[Sun Oct 16 09:39:46 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf09893_pi14-548_cl_pass1_src8.csv
[Sun Oct 16 09:39:46 2011] fullrun_ccd0_acisf09893_pi14-548_cl_pass1_src8_1.ximg exists
[Sun Oct 16 09:39:46 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf09893_pi14-548_cl_pass1_src8.csv
[Sun Oct 16 09:39:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09893_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09893_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 09:39:47 2011] fullrun_ccd0_acisf09893_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Sun Oct 16 09:39:47 2011] fullrun_ccd0_acisf09893_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Oct 16 09:39:47 2011] Fit fullrun_ccd0_acisf09893_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Sun Oct 16 09:40:05 2011] Warning, spatial fit 8 centroid is now closest to src. 21
[Sun Oct 16 09:40:05 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 09:40:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 09:40:05 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 09:40:05 2011] Source does appear to be extended
[Sun Oct 16 09:40:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 09:40:40 2011] Not overwriting source region fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src11_src.reg
[Sun Oct 16 09:40:40 2011] Extracting stamp from image fullrun_ccd0_acisf09893_pi14-548_cl_sm2.00.img.gz, (702, 0) - (1131, 437)
[Sun Oct 16 09:40:40 2011] Writing fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src11.gif
[Sun Oct 16 09:41:01 2011] ../../acisf09893/products/events/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src11_src.evt and ../../acisf09893/products/events/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sun Oct 16 09:41:01 2011] Size of ../../acisf09893/products/events/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src11_src.evt.gz[events] = 187 counts
[Sun Oct 16 09:41:01 2011] Mean chipx,y = (115.56, 185.68)
[Sun Oct 16 09:41:01 2011] Mean tdetx,y = (3246.68, 5016.44)
[Sun Oct 16 09:41:01 2011] chipx,y range = (65.00-163.00, 147.00-234.00)
[Sun Oct 16 09:41:01 2011] Size of ../../acisf09893/products/events/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 924 counts
[Sun Oct 16 09:41:01 2011] ../../acisf09893/products/images/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src11_src.img and ../../acisf09893/products/images/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Sun Oct 16 09:41:01 2011] ../../acisf09893/products/spectra/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src11_src.pi and ../../acisf09893/products/spectra/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Sun Oct 16 09:41:04 2011] ../../acisf09893/products/lightcurves/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src11_src.lc and ../../acisf09893/products/lightcurves/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sun Oct 16 09:41:29 2011] Keeping rmf generated by specextract
[Sun Oct 16 09:41:29 2011] 155.946
[Sun Oct 16 09:46:48 2011] Updating aperture counts using extracted products
[Sun Oct 16 09:46:48 2011] Error reading totcts from fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src11_src.pi.gz
[Sun Oct 16 09:46:49 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 09:46:49 2011] Using photon index=1.80, rate=0.00264, arf fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src11.arf
[Sun Oct 16 09:46:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 09:46:49 2011] Updating source flux to 4.4e-14
[Sun Oct 16 09:47:05 2011] Reading fit data from acisf09893/analysis//spectral/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src11_pl.csv
[Sun Oct 16 09:47:05 2011] Spectral fit parameter nH value = 4.19955e+22
[Sun Oct 16 09:47:05 2011] Spectral fit parameter PhoIndex value = 0.97024
[Sun Oct 16 09:47:05 2011] Failed to get F(0.3-8.0) from acisf09893/analysis//spectral/fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src11_pl.csv, possibly due to different flux energy range selected
[Sun Oct 16 09:47:05 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 09:47:05 2011] Using Nh = 4.2e+22, photon index=0.97, rate=0.00264, arf fullrun_ccd0_acisf09893_pi14-548_pass1_cl_src11.arf
[Sun Oct 16 09:47:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 09:47:05 2011] Updating source flux to 9.2e-14