[Fri Feb 17 11:00:02 2012] Detection parameters:
  Position = (172.6, 416.7) = 17 51 57.96 -29 32 18.6
  Extent = 1.5" x 0.8", rotation angle = 159 degrees
  Source counts = 13.5 +/- 4.7
  Background counts = 8.5
  Rate = 0.0002 +/- 7e-05

[Fri Feb 17 11:00:03 2012] Off-axis axis estimate = 7.21'
[Fri Feb 17 13:15:24 2012] Using EEF radius (= 2.31 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 13:15:24 2012] Initial guess for spatial extent in simple fitting = 2.31"
[Fri Feb 17 13:15:24 2012] source mask rpix=4.7, npix_max = 107, mask sum = 110, frac = 1.021
[Fri Feb 17 13:15:24 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 2.31"
[Fri Feb 17 14:19:18 2012] fullrun_ccd3_acisf09892_pi14-548_cl_pass0_src52.ximg exists
[Fri Feb 17 14:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09892_pi14-548_cl_pass0_src52.csv
[Fri Feb 17 14:19:18 2012] fullrun_ccd3_acisf09892_pi14-548_cl_pass0_src52_1.ximg exists
[Fri Feb 17 14:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09892_pi14-548_cl_pass0_src52.csv
[Fri Feb 17 14:19:18 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09892_pi14-548_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09892_pi14-548_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 14:19:18 2012] fullrun_ccd3_acisf09892_pi14-548_cl_pass0_tfrozen_src52.ximg exists
[Fri Feb 17 14:19:18 2012] fullrun_ccd3_acisf09892_pi14-548_cl_pass0_tfrozen_src52_1.ximg exists
[Fri Feb 17 14:19:18 2012] Fit fullrun_ccd3_acisf09892_pi14-548_cl_pass0_tfrozen_src52 appears to have run properly
[Fri Feb 17 16:01:00 2012] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 26.788059 pixels away
[Fri Feb 17 16:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 16:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 16:01:00 2012] Assessing source extent using major
[Fri Feb 17 16:01:00 2012] Source does appear to be extended
[Fri Feb 17 16:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.82
[Fri Feb 17 16:01:00 2012] Source is asymmetric
[Fri Feb 17 18:04:48 2012] Using EEF radius (= 2.31 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 18:04:48 2012] Initial guess for spatial extent in simple fitting = 2.31"
[Fri Feb 17 18:04:48 2012] source mask rpix=4.7, npix_max = 107, mask sum = 110, frac = 1.021
[Fri Feb 17 18:04:48 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 2.31"
[Fri Feb 17 19:07:39 2012] fullrun_ccd3_acisf09892_pi14-548_cl_pass1_src51.ximg exists
[Fri Feb 17 19:07:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09892_pi14-548_cl_pass1_src51.csv
[Fri Feb 17 19:07:39 2012] fullrun_ccd3_acisf09892_pi14-548_cl_pass1_src51_1.ximg exists
[Fri Feb 17 19:07:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09892_pi14-548_cl_pass1_src51.csv
[Fri Feb 17 19:07:39 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09892_pi14-548_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09892_pi14-548_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 19:07:39 2012] fullrun_ccd3_acisf09892_pi14-548_cl_pass1_tfrozen_src51.ximg exists
[Fri Feb 17 19:07:39 2012] fullrun_ccd3_acisf09892_pi14-548_cl_pass1_tfrozen_src51_1.ximg exists
[Fri Feb 17 19:07:39 2012] Fit fullrun_ccd3_acisf09892_pi14-548_cl_pass1_tfrozen_src51 appears to have run properly
[Fri Feb 17 19:32:53 2012] Spatial fit model total counts = 63.334300, observed total counts = 64.000000
[Fri Feb 17 19:32:53 2012] Offset between fit and detection position for source 63 = 3.499915 pixels
[Fri Feb 17 19:32:53 2012] 64.471900 total counts/ 26.101400 bgd. counts: snr = 7.510443
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 3.499915 pixels
  Position = (172.3, 413.2) = 17 51 57.99 -29 32 20.6
  Extent = 2.4 (1.6-4.2)", rotation angle = 0
  Source counts = 38.4 +/- 8.0
  Background counts = 26.1
  Rate = 0.0006 +/- 0.0001
[Fri Feb 17 19:32:53 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 19:32:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 19:32:53 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 19:32:53 2012] Source does appear to be extended
[Fri Feb 17 19:32:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 20:47:05 2012] Writing source region out to fullrun_ccd3_acisf09892_pi14-548_pass1_cl_src63_src.reg
[Fri Feb 17 20:47:05 2012] Extracting stamp from image fullrun_ccd3_acisf09892_pi14-548_cl_sm2.00.img.gz, (62, 303) - (283, 524)
[Fri Feb 17 20:47:05 2012] Writing fullrun_ccd3_acisf09892_pi14-548_pass1_cl_src63.gif
[Fri Feb 17 21:14:36 2012] Size of ../../acisf09892/products/events/fullrun_ccd3_acisf09892_pi14-548_pass1_cl_src63_src.evt.gz[events] = 82 counts
[Fri Feb 17 21:14:36 2012] Mean chipx,y = (134.94, 700.17)
[Fri Feb 17 21:14:36 2012] Mean tdetx,y = (4431.83, 3195.94)
[Fri Feb 17 21:14:36 2012] chipx,y range = (100.00-166.00, 672.00-733.00)
[Fri Feb 17 21:14:36 2012] Size of ../../acisf09892/products/events/fullrun_ccd3_acisf09892_pi14-548_pass1_cl_src63_bgd.evt.gz[events] = 579 counts
[Fri Feb 17 21:14:37 2012] Not generating rmf since there are only 38 counts
[Fri Feb 17 21:14:37 2012] arf not found, will run specextract
[Fri Feb 17 21:15:02 2012] ../../acisf09892/products/spectra/fullrun_ccd3_acisf09892_pi14-548_pass1_cl_src63.warf not found
[Fri Feb 17 21:15:02 2012] ../../acisf09892/products/spectra/fullrun_ccd3_acisf09892_pi14-548_pass1_cl_src63.wrmf not found
[Fri Feb 17 21:15:02 2012] Removal of ../../acisf09892/products/spectra/fullrun_ccd3_acisf09892_pi14-548_pass1_cl_src63.soff failed
[Fri Feb 17 21:20:48 2012] Spectrum 63 has only 38 counts, deleting rmf
[Fri Feb 17 21:20:48 2012] 169.094
[Fri Feb 17 21:21:37 2012] Updating aperture counts using extracted products
[Fri Feb 17 21:21:37 2012] Error reading totcts from fullrun_ccd3_acisf09892_pi14-548_pass1_cl_src63_src.pi.gz
[Fri Feb 17 21:21:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 21:21:38 2012] Using photon index=1.80, rate=0.000583, arf fullrun_ccd3_acisf09892_pi14-548_pass1_cl_src63.arf
[Fri Feb 17 21:21:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 21:21:38 2012] Updating source flux to 9e-15
[Fri Feb 17 21:22:03 2012] Source 63 has fewer than 100.000000 counts, skipping spectral fitting