[Fri Feb 17 10:59:56 2012] Detection parameters:
  Position = (88.4, 623.2) = 17 52 4.65 -29 39 6.6
  Extent = 2.5" x 1.3", rotation angle = 84 degrees
  Source counts = 15.7 +/- 5.7
  Background counts = 17.3
  Rate = 0.0002 +/- 9e-05

[Fri Feb 17 10:59:56 2012] Off-axis axis estimate = 8.63'
[Fri Feb 17 12:19:57 2012] Using EEF radius (= 3.29 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 12:19:57 2012] Initial guess for spatial extent in simple fitting = 3.29"
[Fri Feb 17 12:19:57 2012] source mask rpix=6.7, npix_max = 206, mask sum = 210, frac = 1.018
[Fri Feb 17 12:19:57 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 3.29"
[Fri Feb 17 13:15:23 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass0_src33.ximg exists
[Fri Feb 17 13:15:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09892_pi14-548_cl_pass0_src33.csv
[Fri Feb 17 13:15:23 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass0_src33_1.ximg exists
[Fri Feb 17 13:15:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09892_pi14-548_cl_pass0_src33.csv
[Fri Feb 17 13:15:23 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09892_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09892_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 13:15:23 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Fri Feb 17 13:15:24 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Feb 17 13:15:24 2012] Fit fullrun_ccd2_acisf09892_pi14-548_cl_pass0_tfrozen_src33 appears to have run properly
[Fri Feb 17 16:00:52 2012] Spatial fit model total counts = 89.167500, observed total counts = 90.000000
[Fri Feb 17 16:00:52 2012] Offset between fit and detection position for source 63 = 8.256133 pixels
[Fri Feb 17 16:00:52 2012] 89.876638 total counts/ 0.248938 bgd. counts: snr = 179.637356
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 8.256133 pixels
  Position = (95.1, 618.5) = 17 52 4.41 -29 39 9.2
  Extent = 6.2 (5.5-6.6)", rotation angle = 0
  Source counts = 89.6 +/- 9.5
  Background counts = 0.2
  Rate = 0.001 +/- 0.0001
[Fri Feb 17 16:00:52 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 16:00:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 16:00:52 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 16:00:52 2012] Source does appear to be extended
[Fri Feb 17 16:00:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 17:09:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 17:09:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 17:09:09 2012] Initial guess for spatial extent in simple fitting = 6.20"
[Fri Feb 17 17:09:09 2012] source mask rpix=12.6, npix_max = 687, mask sum = 702, frac = 1.022
[Fri Feb 17 17:09:09 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 6.20"
[Fri Feb 17 18:04:48 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass1_src31.ximg exists
[Fri Feb 17 18:04:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09892_pi14-548_cl_pass1_src31.csv
[Fri Feb 17 18:04:48 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass1_src31_1.ximg exists
[Fri Feb 17 18:04:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09892_pi14-548_cl_pass1_src31.csv
[Fri Feb 17 18:04:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09892_pi14-548_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09892_pi14-548_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 18:04:48 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass1_tfrozen_src31.ximg exists
[Fri Feb 17 18:04:48 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass1_tfrozen_src31_1.ximg exists
[Fri Feb 17 18:04:48 2012] Fit fullrun_ccd2_acisf09892_pi14-548_cl_pass1_tfrozen_src31 appears to have run properly
[Fri Feb 17 19:32:46 2012] Warning, spatial fit 31 centroid is now closest to src. 39
[Fri Feb 17 19:32:46 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 19:32:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 19:32:46 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 19:32:46 2012] Source does appear to be extended
[Fri Feb 17 19:32:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 20:13:20 2012] Writing source region out to fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src63_src.reg
[Fri Feb 17 20:13:20 2012] Extracting stamp from image fullrun_ccd2_acisf09892_pi14-548_cl_sm2.00.img.gz, (0, 335) - (379, 902)
[Fri Feb 17 20:13:20 2012] Writing fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src63.gif
[Fri Feb 17 20:30:26 2012] Size of ../../acisf09892/products/events/fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src63_src.evt.gz[events] = 346 counts
[Fri Feb 17 20:30:26 2012] Mean chipx,y = (979.85, 521.52)
[Fri Feb 17 20:30:26 2012] Mean tdetx,y = (3582.52, 3106.15)
[Fri Feb 17 20:30:26 2012] chipx,y range = (918.00-1023.00, 458.00-585.00)
[Fri Feb 17 20:30:26 2012] Size of ../../acisf09892/products/events/fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src63_bgd.evt.gz[events] = 2545 counts
[Fri Feb 17 20:30:27 2012] Not generating rmf since there are only 89 counts
[Fri Feb 17 20:30:27 2012] arf not found, will run specextract
[Fri Feb 17 20:30:51 2012] ../../acisf09892/products/spectra/fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src63.warf not found
[Fri Feb 17 20:30:51 2012] ../../acisf09892/products/spectra/fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src63.wrmf not found
[Fri Feb 17 20:30:51 2012] Removal of ../../acisf09892/products/spectra/fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src63.soff failed
[Fri Feb 17 20:47:02 2012] Spectrum 63 has only 90 counts, deleting rmf
[Fri Feb 17 20:47:02 2012] 158.467
[Fri Feb 17 21:21:36 2012] Updating aperture counts using extracted products
[Fri Feb 17 21:21:36 2012] Error reading totcts from fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src63_src.pi.gz
[Fri Feb 17 21:21:37 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 21:21:37 2012] Using photon index=1.80, rate=0.00136, arf fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src63.arf
[Fri Feb 17 21:21:37 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 21:21:37 2012] Updating source flux to 2.2e-14
[Fri Feb 17 21:21:55 2012] Source 63 has fewer than 100.000000 counts, skipping spectral fitting