[Fri Feb 17 10:59:52 2012] Detection parameters:
  Position = (786.1, 188.4) = 17 51 38.32 -29 42 40.8
  Extent = 0.5" x 0.5", rotation angle = 137 degrees
  Source counts = 158.6 +/- 13.6
  Background counts = 27.4
  Rate = 0.002 +/- 0.0002

[Fri Feb 17 10:59:56 2012] Off-axis axis estimate = 7.42'
[Fri Feb 17 12:19:57 2012] Using EEF radius (= 2.44 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 12:19:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 12:19:57 2012] Initial guess for spatial extent in simple fitting = 2.44"
[Fri Feb 17 12:19:57 2012] source mask rpix=5.0, npix_max = 119, mask sum = 99, frac = 0.832
[Fri Feb 17 12:19:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.44"
[Fri Feb 17 13:15:23 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass0_src1.ximg exists
[Fri Feb 17 13:15:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09892_pi14-548_cl_pass0_src1.csv
[Fri Feb 17 13:15:23 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Feb 17 13:15:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09892_pi14-548_cl_pass0_src1.csv
[Fri Feb 17 13:15:23 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09892_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09892_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 13:15:23 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 17 13:15:23 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 17 13:15:23 2012] Fit fullrun_ccd2_acisf09892_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 17 16:00:52 2012] Spatial fit model total counts = 374.000000, observed total counts = 374.000000
[Fri Feb 17 16:00:52 2012] Offset between fit and detection position for source 2 = 1.428126 pixels
[Fri Feb 17 16:00:52 2012] 376.116000 total counts/ 111.853000 bgd. counts: snr = 24.986909
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.428126 pixels
  Position = (785.8, 189.8) = 17 51 38.35 -29 42 40.4
  Extent = 2.1 (1.9-2.4)", rotation angle = 0
  Source counts = 264.3 +/- 19.4
  Background counts = 111.9
  Rate = 0.004 +/- 0.0003
[Fri Feb 17 16:00:52 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 16:00:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 16:00:52 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 16:00:52 2012] Source does appear to be extended
[Fri Feb 17 16:00:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 17:09:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 17:09:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 17:09:09 2012] Initial guess for spatial extent in simple fitting = 2.14"
[Fri Feb 17 17:09:09 2012] source mask rpix=4.4, npix_max = 94, mask sum = 80, frac = 0.847
[Fri Feb 17 17:09:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.14"
[Fri Feb 17 18:04:47 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass1_src1.ximg exists
[Fri Feb 17 18:04:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09892_pi14-548_cl_pass1_src1.csv
[Fri Feb 17 18:04:47 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Feb 17 18:04:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09892_pi14-548_cl_pass1_src1.csv
[Fri Feb 17 18:04:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09892_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09892_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 18:04:48 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 17 18:04:48 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 17 18:04:48 2012] Fit fullrun_ccd2_acisf09892_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 17 19:32:46 2012] Spatial fit model total counts = 351.063000, observed total counts = 353.000000
[Fri Feb 17 19:32:46 2012] Offset between fit and detection position for source 2 = 0.121875 pixels
[Fri Feb 17 19:32:46 2012] 352.532400 total counts/ 91.700400 bgd. counts: snr = 27.238003
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.121875 pixels
  Position = (785.7, 189.9) = 17 51 38.35 -29 42 40.3
  Extent = 2.1 (1.9-2.4)", rotation angle = 0
  Source counts = 260.8 +/- 18.8
  Background counts = 91.7
  Rate = 0.004 +/- 0.0003
[Fri Feb 17 19:32:46 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 19:32:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 19:32:46 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 19:32:46 2012] Source does appear to be extended
[Fri Feb 17 19:32:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 20:13:19 2012] Writing source region out to fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src2_src.reg
[Fri Feb 17 20:13:19 2012] Extracting stamp from image fullrun_ccd2_acisf09892_pi14-548_cl_sm2.00.img.gz, (688, 92) - (883, 288)
[Fri Feb 17 20:13:19 2012] Writing fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src2.gif
[Fri Feb 17 20:13:22 2012] Size of ../../acisf09892/products/events/fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src2_src.evt.gz[events] = 337 counts
[Fri Feb 17 20:13:22 2012] Mean chipx,y = (254.90, 159.22)
[Fri Feb 17 20:13:22 2012] Mean tdetx,y = (3220.22, 3831.10)
[Fri Feb 17 20:13:22 2012] chipx,y range = (228.00-285.00, 128.00-188.00)
[Fri Feb 17 20:13:22 2012] Size of ../../acisf09892/products/events/fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 416 counts
[Fri Feb 17 20:13:23 2012] rmf not found, will run specextract
[Fri Feb 17 20:13:23 2012] arf not found, will run specextract
[Fri Feb 17 20:13:41 2012] ../../acisf09892/products/spectra/fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src2.warf not found
[Fri Feb 17 20:13:41 2012] ../../acisf09892/products/spectra/fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src2.wrmf not found
[Fri Feb 17 20:13:41 2012] Removal of ../../acisf09892/products/spectra/fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src2.soff failed
[Fri Feb 17 20:47:02 2012] Keeping rmf generated by specextract
[Fri Feb 17 20:47:02 2012] 164.036
[Fri Feb 17 21:21:36 2012] Updating aperture counts using extracted products
[Fri Feb 17 21:21:36 2012] Error reading totcts from fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Feb 17 21:21:36 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 21:21:36 2012] Using photon index=1.80, rate=0.00396, arf fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src2.arf
[Fri Feb 17 21:21:36 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 21:21:36 2012] Updating source flux to 6.3e-14
[Fri Feb 17 21:22:03 2012] Reading fit data from acisf09892/analysis//spectral/fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src2_pl.csv
[Fri Feb 17 21:22:03 2012] Spectral fit parameter nH value = 1.09379e+22
[Fri Feb 17 21:22:03 2012] Spectral fit parameter PhoIndex value = 2.05829
[Fri Feb 17 21:22:03 2012] Failed to get F(0.3-8.0) from acisf09892/analysis//spectral/fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Feb 17 21:22:03 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 21:22:03 2012] Using Nh = 1.1e+22, photon index=2.06, rate=0.00396, arf fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src2.arf
[Fri Feb 17 21:22:03 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 21:22:03 2012] Updating source flux to 6.3e-14