[Fri Feb 17 10:59:53 2012] Detection parameters:
  Position = (957.2, 778.2) = 17 51 31.86 -29 37 50.7
  Extent = 0.5" x 0.5", rotation angle = 114 degrees
  Source counts = 13.2 +/- 3.9
  Background counts = 1.8
  Rate = 0.0002 +/- 6e-05

[Fri Feb 17 10:59:56 2012] Off-axis axis estimate = 2.38'
[Fri Feb 17 12:19:57 2012] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 12:19:57 2012] Initial guess for spatial extent in simple fitting = 0.48"
[Fri Feb 17 12:19:57 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.047
[Fri Feb 17 12:19:57 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 0.48"
[Fri Feb 17 13:15:23 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass0_src41.ximg exists
[Fri Feb 17 13:15:23 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass0_src41_1.ximg exists
[Fri Feb 17 13:15:23 2012] Fit fullrun_ccd2_acisf09892_pi14-548_cl_pass0_src41 appears to have run properly
[Fri Feb 17 13:15:24 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass0_tfrozen_src41.ximg exists
[Fri Feb 17 13:15:24 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass0_tfrozen_src41_1.ximg exists
[Fri Feb 17 13:15:24 2012] Fit fullrun_ccd2_acisf09892_pi14-548_cl_pass0_tfrozen_src41 appears to have run properly
[Fri Feb 17 16:00:52 2012] Spatial fit model total counts = 20.999300, observed total counts = 21.000000
[Fri Feb 17 16:00:52 2012] Offset between fit and detection position for source 12 = 0.738695 pixels
[Fri Feb 17 16:00:52 2012] 21.173330 total counts/ 7.134530 bgd. counts: snr = 5.255903
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.738695 pixels
  Position = (957.6, 778.8) = 17 51 31.86 -29 37 50.6
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 14.0 +/- 4.6
  Background counts = 7.1
  Rate = 0.0002 +/- 7e-05
[Fri Feb 17 16:00:52 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 16:00:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 16:00:52 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 16:00:52 2012] Source does appear to be extended
[Fri Feb 17 16:00:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 17:09:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 17:09:09 2012] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Feb 17 17:09:09 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.843
[Fri Feb 17 17:09:09 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 0.56"
[Fri Feb 17 18:04:48 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass1_src39.ximg exists
[Fri Feb 17 18:04:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09892_pi14-548_cl_pass1_src39.csv
[Fri Feb 17 18:04:48 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass1_src39_1.ximg exists
[Fri Feb 17 18:04:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09892_pi14-548_cl_pass1_src39.csv
[Fri Feb 17 18:04:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09892_pi14-548_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09892_pi14-548_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 18:04:48 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass1_tfrozen_src39.ximg exists
[Fri Feb 17 18:04:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09892_pi14-548_cl_pass1_tfrozen_src39.csv
[Fri Feb 17 18:04:48 2012] fullrun_ccd2_acisf09892_pi14-548_cl_pass1_tfrozen_src39_1.ximg exists
[Fri Feb 17 18:04:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf09892_pi14-548_cl_pass1_tfrozen_src39.csv
[Fri Feb 17 18:04:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf09892_pi14-548_cl_pass1_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf09892_pi14-548_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 19:32:46 2012] Spatial fit model total counts = 15.818700, observed total counts = 19.000000
[Fri Feb 17 19:32:46 2012] Offset between fit and detection position for source 12 = 0.082370 pixels
[Fri Feb 17 19:32:46 2012] 16.423850 total counts/ 2.275250 bgd. counts: snr = 9.379915
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.082370 pixels
  Position = (957.6, 778.9) = 17 51 31.86 -29 37 50.6
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 14.1 +/- 4.1
  Background counts = 2.3
  Rate = 0.0002 +/- 6e-05
[Fri Feb 17 19:32:46 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 19:32:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 19:32:46 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 19:32:46 2012] Source does appear to be extended
[Fri Feb 17 19:32:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 20:13:20 2012] Writing source region out to fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src12_src.reg
[Fri Feb 17 20:13:20 2012] Extracting stamp from image fullrun_ccd2_acisf09892_pi14-548_cl_sm2.00.img.gz, (933, 754) - (982, 804)
[Fri Feb 17 20:13:20 2012] Writing fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src12.gif
[Fri Feb 17 20:34:53 2012] Size of ../../acisf09892/products/events/fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src12_src.evt.gz[events] = 15 counts
[Fri Feb 17 20:34:53 2012] Mean chipx,y = (137.47, 755.93)
[Fri Feb 17 20:34:53 2012] Mean tdetx,y = (3816.93, 3948.53)
[Fri Feb 17 20:34:53 2012] chipx,y range = (120.00-154.00, 744.00-779.00)
[Fri Feb 17 20:34:53 2012] Size of ../../acisf09892/products/events/fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 30 counts
[Fri Feb 17 20:34:55 2012] Not generating rmf since there are only 14 counts
[Fri Feb 17 20:34:55 2012] arf not found, will run specextract
[Fri Feb 17 20:35:21 2012] ../../acisf09892/products/spectra/fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src12.warf not found
[Fri Feb 17 20:35:21 2012] ../../acisf09892/products/spectra/fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src12.wrmf not found
[Fri Feb 17 20:35:21 2012] Removal of ../../acisf09892/products/spectra/fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src12.soff failed
[Fri Feb 17 20:47:02 2012] Spectrum 12 has only 14 counts, deleting rmf
[Fri Feb 17 20:47:02 2012] 180.69
[Fri Feb 17 21:21:36 2012] Updating aperture counts using extracted products
[Fri Feb 17 21:21:36 2012] Error reading totcts from fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src12_src.pi.gz
[Fri Feb 17 21:21:37 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 21:21:37 2012] Using photon index=1.80, rate=0.000215, arf fullrun_ccd2_acisf09892_pi14-548_pass1_cl_src12.arf
[Fri Feb 17 21:21:37 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 21:21:37 2012] Updating source flux to 3.2e-15
[Fri Feb 17 21:21:55 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting