[Fri Feb 17 10:59:44 2012] Detection parameters:
  Position = (918.3, 187.3) = 17 50 54.24 -29 43 26.9
  Extent = 2.9" x 2.3", rotation angle = 140 degrees
  Source counts = 153.1 +/- 15.1
  Background counts = 73.9
  Rate = 0.002 +/- 0.0002

[Fri Feb 17 10:59:47 2012] Off-axis axis estimate = 10.82'
[Fri Feb 17 11:03:53 2012] Using EEF radius (= 5.20 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 11:03:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 11:03:53 2012] Initial guess for spatial extent in simple fitting = 5.20"
[Fri Feb 17 11:03:53 2012] source mask rpix=10.6, npix_max = 490, mask sum = 484, frac = 0.988
[Fri Feb 17 11:03:53 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 5.20"
[Fri Feb 17 11:38:51 2012] fullrun_ccd0_acisf09892_pi14-548_cl_pass0_src3.ximg exists
[Fri Feb 17 11:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09892_pi14-548_cl_pass0_src3.csv
[Fri Feb 17 11:38:51 2012] fullrun_ccd0_acisf09892_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Feb 17 11:38:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09892_pi14-548_cl_pass0_src3.csv
[Fri Feb 17 11:38:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09892_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09892_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 11:38:51 2012] fullrun_ccd0_acisf09892_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Feb 17 11:38:51 2012] fullrun_ccd0_acisf09892_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Feb 17 11:38:51 2012] Fit fullrun_ccd0_acisf09892_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Feb 17 16:00:41 2012] Spatial fit model total counts = 285.990000, observed total counts = 284.000000
[Fri Feb 17 16:00:41 2012] Offset between fit and detection position for source 3 = 0.278733 pixels
[Fri Feb 17 16:00:41 2012] 286.283000 total counts/ 120.132000 bgd. counts: snr = 15.159107
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.278733 pixels
  Position = (918.0, 187.3) = 17 50 54.27 -29 43 27.1
  Extent = 4.4 (3.5-5.4)", rotation angle = 0
  Source counts = 166.2 +/- 16.9
  Background counts = 120.1
  Rate = 0.003 +/- 0.0003
[Fri Feb 17 16:00:42 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 16:00:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 16:00:42 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 16:00:42 2012] Source does appear to be extended
[Fri Feb 17 16:00:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 16:01:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 16:01:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 16:01:28 2012] Initial guess for spatial extent in simple fitting = 4.42"
[Fri Feb 17 16:01:28 2012] source mask rpix=9.0, npix_max = 359, mask sum = 361, frac = 1.005
[Fri Feb 17 16:01:28 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.42"
[Fri Feb 17 16:30:48 2012] fullrun_ccd0_acisf09892_pi14-548_cl_pass1_src3.ximg exists
[Fri Feb 17 16:30:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09892_pi14-548_cl_pass1_src3.csv
[Fri Feb 17 16:30:48 2012] fullrun_ccd0_acisf09892_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Feb 17 16:30:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf09892_pi14-548_cl_pass1_src3.csv
[Fri Feb 17 16:30:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf09892_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf09892_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 16:30:49 2012] fullrun_ccd0_acisf09892_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Feb 17 16:30:49 2012] fullrun_ccd0_acisf09892_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Feb 17 16:30:49 2012] Fit fullrun_ccd0_acisf09892_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Feb 17 19:32:35 2012] Warning, spatial fit 3 centroid is now closest to src. 36
[Fri Feb 17 19:32:35 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 19:32:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 19:32:35 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 19:32:35 2012] Source does appear to be extended
[Fri Feb 17 19:32:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 19:33:22 2012] Writing source region out to fullrun_ccd0_acisf09892_pi14-548_pass1_cl_src3_src.reg
[Fri Feb 17 19:33:22 2012] Extracting stamp from image fullrun_ccd0_acisf09892_pi14-548_cl_sm2.00.img.gz, (716, 0) - (1120, 389)
[Fri Feb 17 19:33:22 2012] Writing fullrun_ccd0_acisf09892_pi14-548_pass1_cl_src3.gif
[Fri Feb 17 19:34:28 2012] Size of ../../acisf09892/products/events/fullrun_ccd0_acisf09892_pi14-548_pass1_cl_src3_src.evt.gz[events] = 288 counts
[Fri Feb 17 19:34:28 2012] Mean chipx,y = (127.99, 167.63)
[Fri Feb 17 19:34:28 2012] Mean tdetx,y = (3228.63, 5004.01)
[Fri Feb 17 19:34:28 2012] chipx,y range = (88.00-179.00, 119.00-207.00)
[Fri Feb 17 19:34:28 2012] Size of ../../acisf09892/products/events/fullrun_ccd0_acisf09892_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 1381 counts
[Fri Feb 17 19:34:29 2012] rmf not found, will run specextract
[Fri Feb 17 19:34:29 2012] arf not found, will run specextract
[Fri Feb 17 19:34:43 2012] ../../acisf09892/products/spectra/fullrun_ccd0_acisf09892_pi14-548_pass1_cl_src3.warf not found
[Fri Feb 17 19:34:43 2012] ../../acisf09892/products/spectra/fullrun_ccd0_acisf09892_pi14-548_pass1_cl_src3.wrmf not found
[Fri Feb 17 19:34:43 2012] Removal of ../../acisf09892/products/spectra/fullrun_ccd0_acisf09892_pi14-548_pass1_cl_src3.soff failed
[Fri Feb 17 19:48:14 2012] Keeping rmf generated by specextract
[Fri Feb 17 19:48:14 2012] 155.661
[Fri Feb 17 21:21:34 2012] Updating aperture counts using extracted products
[Fri Feb 17 21:21:34 2012] Error reading totcts from fullrun_ccd0_acisf09892_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Feb 17 21:21:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 21:21:34 2012] Using photon index=1.80, rate=0.00253, arf fullrun_ccd0_acisf09892_pi14-548_pass1_cl_src3.arf
[Fri Feb 17 21:21:34 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 21:21:34 2012] Updating source flux to 4.3e-14