[Sun Oct  2 12:27:28 2011] Detection parameters:
  Position = (1132.6, 498.2) = 14 20 28.04 52 58 41.4
  Extent = 0.5" x 0.5", rotation angle = 128 degrees
  Source counts = 11.4 +/- 3.5
  Background counts = 0.6
  Rate = 0.0003 +/- 0.0001

[Sun Oct  2 12:27:37 2011] Off-axis axis estimate = 2.33'
[Sun Oct  2 12:28:54 2011] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 12:28:54 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Sun Oct  2 12:28:54 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.068
[Sun Oct  2 12:28:54 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.47"
[Sun Oct  2 12:28:59 2011] fullrun_ccd3_acisf09876_pi14-548_cl_pass0_src9.ximg exists
[Sun Oct  2 12:29:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09876_pi14-548_cl_pass0_src9.csv
[Sun Oct  2 12:29:00 2011] fullrun_ccd3_acisf09876_pi14-548_cl_pass0_src9_1.ximg exists
[Sun Oct  2 12:29:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09876_pi14-548_cl_pass0_src9.csv
[Sun Oct  2 12:29:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09876_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09876_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 12:29:02 2011] fullrun_ccd3_acisf09876_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sun Oct  2 12:29:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09876_pi14-548_cl_pass0_tfrozen_src9.csv
[Sun Oct  2 12:29:02 2011] fullrun_ccd3_acisf09876_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Oct  2 12:29:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09876_pi14-548_cl_pass0_tfrozen_src9.csv
[Sun Oct  2 12:29:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09876_pi14-548_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09876_pi14-548_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 12:29:18 2011] Spatial fit model total counts = 12.104900, observed total counts = 14.000000
[Sun Oct  2 12:29:18 2011] Offset between fit and detection position for source 3 = 0.763191 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.763191 pixels
  Position = (1133.1, 498.8) = 14 20 28.04 52 58 41.4
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 11.4 +/- 3.4
  Background counts = 0.0
  Rate = 0.0003 +/- 0.0001
[Sun Oct  2 12:29:18 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 12:29:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 12:29:18 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 12:29:18 2011] Source does appear to be extended
[Sun Oct  2 12:29:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 12:29:55 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 12:29:55 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Sun Oct  2 12:29:55 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.036
[Sun Oct  2 12:29:55 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.48"
[Sun Oct  2 12:29:57 2011] fullrun_ccd3_acisf09876_pi14-548_cl_pass1_src9.ximg exists
[Sun Oct  2 12:29:57 2011] fullrun_ccd3_acisf09876_pi14-548_cl_pass1_src9_1.ximg exists
[Sun Oct  2 12:29:57 2011] Fit fullrun_ccd3_acisf09876_pi14-548_cl_pass1_src9 appears to have run properly
[Sun Oct  2 12:29:58 2011] fullrun_ccd3_acisf09876_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sun Oct  2 12:29:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09876_pi14-548_cl_pass1_tfrozen_src9.csv
[Sun Oct  2 12:29:58 2011] fullrun_ccd3_acisf09876_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Oct  2 12:29:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09876_pi14-548_cl_pass1_tfrozen_src9.csv
[Sun Oct  2 12:29:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf09876_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf09876_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 12:30:10 2011] Spatial fit model total counts = 12.448600, observed total counts = 14.000000
[Sun Oct  2 12:30:10 2011] Offset between fit and detection position for source 3 = 0.028443 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.028443 pixels
  Position = (1133.1, 498.8) = 14 20 28.04 52 58 41.4
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 11.8 +/- 3.4
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Sun Oct  2 12:30:10 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 12:30:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 12:30:10 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 12:30:10 2011] Source does appear to be extended
[Sun Oct  2 12:30:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 12:52:49 2011] Not overwriting source region fullrun_ccd3_acisf09876_pi14-548_pass1_cl_src3_src.reg
[Sun Oct  2 12:52:49 2011] Extracting stamp from image fullrun_ccd3_acisf09876_pi14-548_cl_sm2.00.img.gz, (1111, 476) - (1155, 521)
[Sun Oct  2 12:52:49 2011] Writing fullrun_ccd3_acisf09876_pi14-548_pass1_cl_src3.gif
[Sun Oct  2 12:57:13 2011] ../../acisf09876/products/events/fullrun_ccd3_acisf09876_pi14-548_pass1_cl_src3_src.evt and ../../acisf09876/products/events/fullrun_ccd3_acisf09876_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Oct  2 12:57:13 2011] Size of ../../acisf09876/products/events/fullrun_ccd3_acisf09876_pi14-548_pass1_cl_src3_src.evt.gz[events] = 12 counts
[Sun Oct  2 12:57:13 2011] Mean chipx,y = (680.58, 950.83)
[Sun Oct  2 12:57:13 2011] Mean tdetx,y = (4181.17, 3741.58)
[Sun Oct  2 12:57:13 2011] chipx,y range = (664.00-697.00, 933.00-965.00)
[Sun Oct  2 12:57:13 2011] Size of ../../acisf09876/products/events/fullrun_ccd3_acisf09876_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 4 counts
[Sun Oct  2 12:57:13 2011] ../../acisf09876/products/images/fullrun_ccd3_acisf09876_pi14-548_pass1_cl_src3_src.img and ../../acisf09876/products/images/fullrun_ccd3_acisf09876_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Oct  2 12:57:13 2011] Not generating rmf since there are only 11 counts
[Sun Oct  2 12:57:13 2011] arf not found, will run specextract
[Sun Oct  2 12:57:48 2011] ../../acisf09876/products/spectra/fullrun_ccd3_acisf09876_pi14-548_pass1_cl_src3.warf not found
[Sun Oct  2 12:57:48 2011] ../../acisf09876/products/spectra/fullrun_ccd3_acisf09876_pi14-548_pass1_cl_src3.wrmf not found
[Sun Oct  2 12:57:48 2011] Removal of ../../acisf09876/products/spectra/fullrun_ccd3_acisf09876_pi14-548_pass1_cl_src3.soff failed
[Sun Oct  2 12:57:56 2011] ../../acisf09876/products/lightcurves/fullrun_ccd3_acisf09876_pi14-548_pass1_cl_src3_src.lc and ../../acisf09876/products/lightcurves/fullrun_ccd3_acisf09876_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Oct  2 13:04:36 2011] Spectrum 3 has only 12 counts, deleting rmf
[Sun Oct  2 13:04:36 2011] 194.829
[Sun Oct  2 13:05:18 2011] Updating aperture counts using extracted products
[Sun Oct  2 13:05:18 2011] Error reading totcts from fullrun_ccd3_acisf09876_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Oct  2 13:05:18 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 13:05:18 2011] Using photon index=1.80, rate=0.000355, arf fullrun_ccd3_acisf09876_pi14-548_pass1_cl_src3.arf
[Sun Oct  2 13:05:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 13:05:18 2011] Updating source flux to 4.3e-15
[Sun Oct  2 13:05:30 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting