[Fri Oct 7 11:55:33 2011] Detection parameters: Position = (531.3, 150.0) = 14 20 59.77 52 56 4.4 Extent = 1.2" x 1.1", rotation angle = 49 degrees Source counts = 10.3 +/- 3.6 Background counts = 2.7 Rate = 0.0004 +/- 0.0001 [Fri Oct 7 11:55:33 2011] Off-axis axis estimate = 7.76' [Fri Oct 7 11:56:30 2011] Using EEF radius (= 2.66 ")to estimate initial spatial extent for simple fitting [Fri Oct 7 11:56:30 2011] Initial guess for spatial extent in simple fitting = 2.66" [Fri Oct 7 11:56:30 2011] source mask rpix=5.4, npix_max = 139, mask sum = 144, frac = 1.031 [Fri Oct 7 11:56:30 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 2.66" [Fri Oct 7 11:56:33 2011] fullrun_ccd3_acisf09875_pi14-548_cl_pass0_src9.ximg exists [Fri Oct 7 11:56:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09875_pi14-548_cl_pass0_src9.csv [Fri Oct 7 11:56:33 2011] fullrun_ccd3_acisf09875_pi14-548_cl_pass0_src9_1.ximg exists [Fri Oct 7 11:56:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf09875_pi14-548_cl_pass0_src9.csv [Fri Oct 7 11:56:33 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf09875_pi14-548_cl_pass0_src9_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf09875_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Oct 7 11:56:33 2011] fullrun_ccd3_acisf09875_pi14-548_cl_pass0_tfrozen_src9.ximg exists [Fri Oct 7 11:56:33 2011] fullrun_ccd3_acisf09875_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists [Fri Oct 7 11:56:33 2011] Fit fullrun_ccd3_acisf09875_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly [Fri Oct 7 11:56:42 2011] Spatial fit model total counts = 34.666400, observed total counts = 33.000000 [Fri Oct 7 11:56:42 2011] Offset between fit and detection position for source 16 = 7.519306 pixels [Fri Oct 7 11:56:42 2011] 35.096390 total counts/ 31.785800 bgd. counts: snr = 0.587204 Spatial fit parameters: Offset between fit and detection position for source 16 = 7.519306 pixels Position = (524.2, 152.3) = 14 21 0.19 52 56 5.2 Extent = 5.3 (0.7-10.6)", rotation angle = 0 Source counts = 3.3 +/- 5.9 Background counts = 31.8 Rate = 0.0001 +/- 0.0002 Deleting source due to low Poisson probability