[Wed Oct 19 05:43:44 2011] Detection parameters:
  Position = (528.0, 475.2) = 19 24 10.25 50 16 5.5
  Extent = 0.8" x 0.6", rotation angle = 65 degrees
  Source counts = 73.3 +/- 8.7
  Background counts = 1.7
  Rate = 0.003 +/- 0.0004

[Wed Oct 19 05:43:45 2011] Off-axis axis estimate = 3.71'
[Wed Oct 19 05:44:25 2011] Using EEF radius (= 0.75 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 05:44:25 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Wed Oct 19 05:44:25 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.980
[Wed Oct 19 05:44:25 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.75"
[Wed Oct 19 05:44:25 2011] fullrun_ccd6_acisf09868_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct 19 05:44:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09868_pi14-548_cl_pass0_src3.csv
[Wed Oct 19 05:44:25 2011] fullrun_ccd6_acisf09868_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct 19 05:44:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09868_pi14-548_cl_pass0_src3.csv
[Wed Oct 19 05:44:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf09868_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf09868_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 05:44:25 2011] fullrun_ccd6_acisf09868_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct 19 05:44:25 2011] fullrun_ccd6_acisf09868_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct 19 05:44:25 2011] Fit fullrun_ccd6_acisf09868_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct 19 05:44:32 2011] Spatial fit model total counts = 74.196300, observed total counts = 75.000000
[Wed Oct 19 05:44:32 2011] Offset between fit and detection position for source 3 = 0.561880 pixels
[Wed Oct 19 05:44:32 2011] 74.023460 total counts/ 3.182060 bgd. counts: snr = 39.713024
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.561880 pixels
  Position = (528.5, 475.5) = 19 24 10.25 50 16 5.4
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 70.8 +/- 8.6
  Background counts = 3.2
  Rate = 0.003 +/- 0.0004
[Wed Oct 19 05:44:32 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 05:44:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 05:44:32 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 05:44:32 2011] Source does appear to be extended
[Wed Oct 19 05:44:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 05:44:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 05:44:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 05:44:53 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Wed Oct 19 05:44:53 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.974
[Wed Oct 19 05:44:53 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.00"
[Wed Oct 19 05:44:53 2011] fullrun_ccd6_acisf09868_pi14-548_cl_pass1_src3.ximg exists
[Wed Oct 19 05:44:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09868_pi14-548_cl_pass1_src3.csv
[Wed Oct 19 05:44:53 2011] fullrun_ccd6_acisf09868_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Oct 19 05:44:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf09868_pi14-548_cl_pass1_src3.csv
[Wed Oct 19 05:44:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf09868_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf09868_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 05:44:53 2011] fullrun_ccd6_acisf09868_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct 19 05:44:53 2011] fullrun_ccd6_acisf09868_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct 19 05:44:53 2011] Fit fullrun_ccd6_acisf09868_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct 19 05:45:00 2011] Spatial fit model total counts = 75.394700, observed total counts = 75.000000
[Wed Oct 19 05:45:00 2011] Offset between fit and detection position for source 3 = 0.017448 pixels
[Wed Oct 19 05:45:00 2011] 75.217570 total counts/ 3.738470 bgd. counts: snr = 36.968525
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.017448 pixels
  Position = (528.5, 475.5) = 19 24 10.25 50 16 5.4
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 71.5 +/- 8.7
  Background counts = 3.7
  Rate = 0.003 +/- 0.0004
[Wed Oct 19 05:45:00 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 05:45:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 05:45:00 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 05:45:00 2011] Source does appear to be extended
[Wed Oct 19 05:45:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 05:45:50 2011] Not overwriting source region fullrun_ccd6_acisf09868_pi14-548_pass1_cl_src3_src.reg
[Wed Oct 19 05:45:50 2011] Extracting stamp from image fullrun_ccd6_acisf09868_pi14-548_cl_sm2.00.img.gz, (483, 430) - (574, 521)
[Wed Oct 19 05:45:50 2011] Writing fullrun_ccd6_acisf09868_pi14-548_pass1_cl_src3.gif
[Wed Oct 19 05:45:57 2011] ../../acisf09868/products/events/fullrun_ccd6_acisf09868_pi14-548_pass1_cl_src3_src.evt and ../../acisf09868/products/events/fullrun_ccd6_acisf09868_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Oct 19 05:45:57 2011] Size of ../../acisf09868/products/events/fullrun_ccd6_acisf09868_pi14-548_pass1_cl_src3_src.evt.gz[events] = 75 counts
[Wed Oct 19 05:45:57 2011] Mean chipx,y = (786.11, 434.72)
[Wed Oct 19 05:45:57 2011] Mean tdetx,y = (3661.11, 2136.72)
[Wed Oct 19 05:45:57 2011] chipx,y range = (767.00-805.00, 416.00-453.00)
[Wed Oct 19 05:45:57 2011] Size of ../../acisf09868/products/events/fullrun_ccd6_acisf09868_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 24 counts
[Wed Oct 19 05:45:57 2011] ../../acisf09868/products/images/fullrun_ccd6_acisf09868_pi14-548_pass1_cl_src3_src.img and ../../acisf09868/products/images/fullrun_ccd6_acisf09868_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Oct 19 05:45:57 2011] ../../acisf09868/products/spectra/fullrun_ccd6_acisf09868_pi14-548_pass1_cl_src3_src.pi and ../../acisf09868/products/spectra/fullrun_ccd6_acisf09868_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Oct 19 05:45:57 2011] Not generating rmf since there are only 71 counts
[Wed Oct 19 05:46:00 2011] ../../acisf09868/products/lightcurves/fullrun_ccd6_acisf09868_pi14-548_pass1_cl_src3_src.lc and ../../acisf09868/products/lightcurves/fullrun_ccd6_acisf09868_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Oct 19 05:46:38 2011] 200.873
[Wed Oct 19 05:47:28 2011] Updating aperture counts using extracted products
[Wed Oct 19 05:47:28 2011] Error reading totcts from fullrun_ccd6_acisf09868_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Oct 19 05:47:29 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 05:47:29 2011] Using photon index=1.80, rate=0.00298, arf fullrun_ccd6_acisf09868_pi14-548_pass1_cl_src3.arf
[Wed Oct 19 05:47:29 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 05:47:29 2011] Updating source flux to 3.2e-14
[Wed Oct 19 05:47:33 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting